GS1560ACFE3 Equivalent & Substitute Parts

Part Overview

The GS1560ACFE3 is a video deserializer IC manufactured by Semtech Corporation, designed for professional video applications using SMPTE standards. This component features serial control interface and operates within a 1.65V to 1.95V supply voltage range in an 80-LQFP surface mount package.

The GS1560ACFE3 has reached obsolete product status. Identifying equivalent and substitute parts is necessary to maintain system functionality, ensure supply chain continuity, and support legacy equipment maintenance and redesign initiatives.

Substiute Parts

GS1560ACFE3

Semtech CorporationIn Stock: 1154GS1560ACFE3 Datasheet

Current PartRFQ

GS2970-IBE3

Semtech CorporationIn Stock: 1435GS2970-IBE3 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the GS1560ACFE3 are identified based on the following critical parameters that determine functional and mechanical compatibility:

Primary Substitution Criteria:

• Manufacturer: Semtech Corporation (same manufacturer ensures design continuity and support)
• Category: Linear video processing components
• Applications: Professional Video systems
• Standards Compliance: SMPTE standard support
• Mounting Type: Surface Mount technology
• Moisture Sensitivity Level: MSL 3 classification

The GS2970-IBE3 qualifies as a substitute part within the Semtech HD-LINX® II product family. While the GS2970-IBE3 functions as a video receiver rather than a deserializer, and operates with dual supply voltage options (1.71V ~ 1.89V and 3.13V ~ 3.47V), it maintains compatibility with SMPTE professional video standards and shares the same MSL rating. The transition from deserializer to receiver functionality and package change from 80-LQFP to 100-LBGA reflects the evolution of Semtech's video processing architecture for modern professional video applications.

Parameter Comparison

Engineering Selection Recommendations

For Legacy System Maintenance: The GS2970-IBE3 provides functional video processing capability for professional video applications within the Semtech product ecosystem. Both components share identical MSL ratings and operate within overlapping supply voltage ranges, supporting thermal and environmental compatibility in professional video installations.

Product Status Considerations: The GS1560ACFE3 is classified as obsolete, indicating end-of-life status with no further manufacturing or support. The GS2970-IBE3 carries a "Not For New Designs" designation, indicating limited availability and no recommended use in new product development. Both components represent legacy technology within Semtech's video processing portfolio.

Compliance and Certification: The GS2970-IBE3 is RoHS Compliant, providing environmental compliance advantages for systems requiring regulatory adherence. Both components carry identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications, ensuring consistent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can the GS2970-IBE3 directly replace the GS1560ACFE3 in existing designs?

A: Direct replacement requires circuit-level evaluation. The GS2970-IBE3 transitions from serial control interface to logic control interface, and changes from 80-LQFP to 100-LBGA package. These differences necessitate PCB redesign and firmware modification. Both components support SMPTE standards and professional video applications, but functional architecture differs between deserializer and receiver implementations.

Q: What are the supply voltage compatibility considerations?

A: The GS1560ACFE3 operates at 1.65V ~ 1.95V. The GS2970-IBE3 supports dual supply options: 1.71V ~ 1.89V and 3.13V ~ 3.47V. The lower voltage range of the GS2970-IBE3 (1.71V ~ 1.89V) overlaps with the GS1560ACFE3 specification, enabling compatibility in systems designed for the lower voltage range. Systems requiring the full 1.65V minimum of the original part require verification of GS2970-IBE3 performance at that threshold.

Q: Are there packaging considerations for board-level integration?

A: Yes. The GS1560ACFE3 uses 80-LQFP (14x14mm) package, while the GS2970-IBE3 uses 100-LBGA (11x11mm) package. BGA packages require different PCB design, assembly processes, and rework procedures compared to LQFP packages. The smaller footprint of the BGA may provide space advantages, but assembly capability and repair accessibility must be evaluated for your manufacturing environment.

Q: What is the significance of the MSL rating for both components?

A: Both components carry MSL 3 (168 Hours) rating, indicating identical moisture sensitivity and storage requirements. This ensures equivalent handling, storage, and reflow process compatibility. Components must be stored in controlled humidity environments and baked according to MSL 3 specifications before assembly.

Q: Why is the GS2970-IBE3 marked "Not For New Designs"?

A: This designation indicates the component is in end-of-life phase with limited production and no manufacturer support for new applications. It is suitable only for legacy system maintenance and repair. New product development should evaluate current-generation Semtech video processing components.