GPB554CL05BR Equivalent & Substitute Parts

Part Overview

The GPB554CL05BR is an illuminated pushbutton switch manufactured by CW Industries, classified as SPST-NO (Single Pole Single Throw - Normally Open) with a 6A DC rating at 14V. This component is designed for panel-mount, snap-in applications with red LED illumination and a square red actuator. The part is currently listed as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations.

Substiute Parts

GPB554CL05BR

CW IndustriesIn Stock: 1210GPB554CL05BR Datasheet

Current PartRFQ

GPB548CL05BR

CW IndustriesIn Stock: 1047GPB548CL05BR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the GPB554CL05BR is determined by the following critical parameters:

Electrical Compatibility Requirements:

• Circuit configuration must remain SPST-NO
• Current rating must support minimum 6A DC operation
• Voltage rating must support minimum 14V DC operation
• Switch function must maintain Off-Momentary operation

Mechanical & Physical Requirements:

• Mounting type must be Panel Mount, Snap-In
• Panel cutout dimension must accommodate Circular 12.10mm diameter
• Actuator type must be Square Button configuration
• Termination style must be Solder Lug

Environmental & Compliance Requirements:

• Operating temperature range must encompass 0°C to 55°C
• RoHS3 compliance required
• Moisture Sensitivity Level 1 (Unlimited) acceptable

The GPB548CL05BR qualifies as a manufacturer-recommended substitute based on alignment with these core parameters within the CW Industries GPB series family.

Parameter Comparison

Engineering Selection Recommendations

The GPB548CL05BR is designated as the manufacturer-recommended substitute for the obsolete GPB554CL05BR. Both components are manufactured by CW Industries within the GPB series product line. The substitute part maintains active product status, ensuring ongoing availability and supply chain continuity.

Selection of the GPB548CL05BR is supported by:

• Manufacturer recommendation status
• Identical Moisture Sensitivity Level classification
• Shared manufacturer and series designation
• Active product status providing long-term availability

Component selection should be based on confirmation that electrical ratings, mechanical dimensions, and functional specifications of the GPB548CL05BR align with system requirements, as detailed specifications for the substitute part require verification against the original design parameters.

Frequently Asked Questions (FAQ)

Q: Why is the GPB554CL05BR listed as obsolete? A: The GPB554CL05BR has reached end-of-life status within the CW Industries product portfolio. The GPB548CL05BR represents the active substitute within the same product series.

Q: What are the critical parameters for substitution compatibility? A: Substitution compatibility is determined by circuit configuration (SPST-NO), current and voltage ratings (6A at 14V DC minimum), mounting type (Panel Mount, Snap-In), panel cutout dimensions (Circular 12.10mm), actuator type (Square Button), and termination style (Solder Lug).

Q: Is the GPB548CL05BR a direct pin-for-pin replacement? A: The GPB548CL05BR is the manufacturer-recommended substitute. Physical and electrical compatibility should be confirmed against your specific application requirements and PCB layout specifications.

Q: Are there compliance differences between the main part and substitute? A: Both components maintain Moisture Sensitivity Level 1 (Unlimited) classification. RoHS compliance status for the substitute part should be confirmed with the manufacturer or distributor.

Q: What is the panel cutout requirement for installation? A: The panel cutout dimension is specified as Circular 12.10mm diameter for the main part. Mechanical compatibility of the substitute part must be confirmed.

Q: Can I use the GPB548CL05BR in existing designs without modification? A: The GPB548CL05BR is manufacturer-recommended for substitution. Design verification is required to confirm electrical ratings, mechanical fit, and functional performance in your specific application.