GPAS1007 MNG Equivalent & Substitute Parts

Part Overview

The GPAS1007 MNG is a general-purpose rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 1000 V DC reverse voltage and 10 A average rectified current in a surface mount D2PAK (TO-263AB) package. The device operates across a junction temperature range of -55°C to 150°C and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1). This part is currently active in production with 834 units in stock.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to component availability, supply chain considerations, or design flexibility within the same package family.

Substiute Parts

GPAS1007 MNG

Taiwan Semiconductor CorporationIn Stock: 879GPAS1007 MNG Datasheet

Current PartRFQ

STTH3010GY-TR

STMicroelectronicsIn Stock: 3754STTH3010GY-TR Datasheet

SimilarRFQ

STTH810G-TR

STMicroelectronicsIn Stock: 1463STTH810G-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the GPAS1007 MNG are qualified based on the following criteria:

Electrical Compatibility Parameters:

• Voltage - DC Reverse (Vr) (Max): Must equal or exceed 1000 V
• Package / Case: Must be TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
• Mounting Type: Must be Surface Mount
• RoHS Status: Must be ROHS3 Compliant
• Moisture Sensitivity Level (MSL): Must be 1 (Unlimited)

Current Rating Consideration: Substitute parts may have current ratings that differ from the 10 A specification of the main part. Parts with higher current ratings (30 A, 8 A) are acceptable substitutes when the application circuit design accommodates the alternative current specification. Parts with lower current ratings require circuit validation to ensure adequate current capacity.

Recovery Speed Classification: The GPAS1007 MNG operates with Standard Recovery (>500ns). Substitute parts with Fast Recovery (≤500ns) characteristics represent an enhancement in switching performance and are electrically compatible.

Parameter Comparison

Engineering Selection Recommendations

STTH3010GY-TR (STMicroelectronics): This substitute part is rated for 30 A average rectified current, exceeding the 10 A specification of the GPAS1007 MNG. Both devices share identical 1000 V reverse voltage ratings and D2PAK packaging. The STTH3010GY-TR features Fast Recovery (≤500ns, trr = 100 ns) compared to the Standard Recovery characteristic of the main part. Operating temperature range extends to 175°C maximum. This part carries AEC-Q101 automotive qualification. Selection of this substitute requires circuit design validation to confirm that the higher current rating and enhanced recovery speed are compatible with the application requirements.

STTH810G-TR (STMicroelectronics): This substitute part is rated for 8 A average rectified current, which is lower than the 10 A specification of the GPAS1007 MNG. Both devices share identical 1000 V reverse voltage ratings, D2PAK packaging, and 5 µA reverse leakage current at 1000 V. The STTH810G-TR features Fast Recovery (≤500ns, trr = 85 ns). Operating temperature maximum is 175°C. Selection of this substitute requires circuit design validation to confirm that the reduced current rating provides adequate capacity for the application.

All substitute parts maintain RoHS3 compliance, MSL 1 (Unlimited) moisture sensitivity level, and active product status.

Frequently Asked Questions (FAQ)

Q: Can STTH3010GY-TR replace GPAS1007 MNG in all applications?

A: STTH3010GY-TR shares the same 1000 V reverse voltage rating and D2PAK package as GPAS1007 MNG. The higher 30 A current rating and improved Fast Recovery characteristics (100 ns) represent electrical enhancements. Circuit design must validate that the application can accommodate these parameter differences.

Q: What is the primary difference between STTH810G-TR and GPAS1007 MNG?

A: STTH810G-TR is rated for 8 A average rectified current compared to 10 A for GPAS1007 MNG. Both share 1000 V reverse voltage, identical reverse leakage current (5 µA @ 1000 V), and D2PAK packaging. STTH810G-TR features Fast Recovery (85 ns) versus Standard Recovery for the main part. Circuit design must confirm the 8 A rating is sufficient for the application.

Q: Are all substitute parts in the same D2PAK package?

A: Yes. GPAS1007 MNG, STTH3010GY-TR, and STTH810G-TR all use TO-263-3, D2PAK (2 Leads + Tab), TO-263AB packaging. Direct mechanical substitution is possible without PCB layout modification.

Q: What is the difference between Standard Recovery and Fast Recovery?

A: GPAS1007 MNG operates with Standard Recovery (>500ns). Both substitute parts feature Fast Recovery (≤500ns), with reverse recovery times of 100 ns (STTH3010GY-TR) and 85 ns (STTH810G-TR). Faster recovery reduces switching losses and improves efficiency in high-frequency applications.

Q: Do all parts meet RoHS3 compliance?

A: Yes. GPAS1007 MNG, STTH3010GY-TR, and STTH810G-TR are all RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level.

Q: What is the operating temperature range difference?

A: GPAS1007 MNG operates from -55°C to 150°C junction temperature. STTH3010GY-TR operates from -40°C to 175°C, and STTH810G-TR has a maximum junction temperature of 175°C. Applications requiring operation below -40°C require the main part.

Q: Is STTH3010GY-TR automotive qualified?

A: Yes. STTH3010GY-TR carries AEC-Q101 automotive qualification. GPAS1007 MNG and STTH810G-TR do not list automotive qualification in the provided specifications.