GP2AP02VT00F Equivalent & Substitute Parts

Part Overview

The GP2AP02VT00F is an infrared optical sensor operating at 940nm wavelength with I2C digital output interface. This component is designed for applications requiring non-contact optical sensing with integrated signal processing. The part is classified as Obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and production continuity. Substitute components must maintain compatibility with the original electrical interface, supply voltage requirements, and operating temperature specifications.

Substiute Parts

GP2AP02VT00F

SHARP/Socle TechnologyIn Stock: 4236GP2AP02VT00F Datasheet

Current PartRFQ

GP2AP02VT20F

SHARP/Socle TechnologyIn Stock: 5454GP2AP02VT20F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the GP2AP02VT00F is determined by the following critical parameters:

Primary Compatibility Criteria:

• Optical Wavelength: 940nm infrared spectrum
• Digital Interface: I2C communication protocol
• Supply Voltage Range: 2.6V to 3.5V compatibility
• Operating Temperature Range: -20°C to 70°C minimum coverage
• Mounting Technology: Surface mount configuration
• Package Form Factor: 12-SMD Module physical dimensions

The substitute part GP2AP02VT20F is identified as an equivalent based on manufacturer lineage (SHARP/Socle Technology), shared optical sensing architecture, and maintained I2C interface specification. The substitute maintains the same supply voltage operating window and temperature range requirements.

Parameter Comparison

Engineering Selection Recommendations

GP2AP02VT20F is the designated substitute for GP2AP02VT00F applications. Selection rationale is based on the following factors:

Product Status Alignment: The GP2AP02VT20F maintains Active product status, ensuring continued manufacturing availability, technical support, and supply chain reliability. The original GP2AP02VT00F is classified as Obsolete, creating supply discontinuity risk.

Electrical Compatibility: Both components operate within identical supply voltage parameters (2.6V to 3.5V) and temperature operating ranges (-20°C to 70°C), eliminating the requirement for circuit redesign or thermal management modifications.

Interface Preservation: I2C digital output specification is maintained across both components, ensuring firmware and software compatibility without protocol translation or interface adaptation.

Optical Specification Consistency: 940nm infrared wavelength and IR sensor type are preserved, maintaining optical performance characteristics and application-specific detection capabilities.

Frequently Asked Questions (FAQ)

Q: Can GP2AP02VT20F directly replace GP2AP02VT00F in existing designs?

A: Yes. Both components share identical electrical specifications (supply voltage, operating temperature range, I2C interface), mounting technology (surface mount), and package form factor (12-SMD Module). Direct substitution is supported without circuit modification.

Q: What is the primary reason for substitution?

A: The GP2AP02VT00F is classified as Obsolete. The GP2AP02VT20F is an Active product from the same manufacturer, providing continued availability and manufacturing support.

Q: Are there differences in optical performance between these components?

A: Both components operate at 940nm wavelength with IR sensor type classification. Optical performance parameters are equivalent for application requirements.

Q: Does the packaging differ between the main part and substitute?

A: Both components use 12-SMD Module surface mount packaging. The GP2AP02VT20F is supplied in Tray packaging format, which is standard for active production components and does not affect electrical or mechanical compatibility.

Q: What supply voltage should be used with the substitute part?

A: The GP2AP02VT20F operates within the 2.6V to 3.5V supply range, identical to the original component. Existing power supply designs require no modification.

Q: Is the I2C communication protocol identical?

A: Yes. Both components utilize I2C digital output interface. Firmware and software implementations developed for GP2AP02VT00F are compatible with GP2AP02VT20F without protocol adaptation.