GP12MAKE Equivalent & Substitute Parts

Part Overview

The GP12MAKE is a pushbutton switch manufactured by C&K, featuring SPDT (Single Pole Double Throw) circuit configuration with 0.4VA current rating at 20V. This component is designed for through-hole, right-angle mounting applications with IP57 ingress protection and epoxy sealed terminals. The GP12MAKE is currently listed as obsolete, making identification of equivalent substitute parts essential for ongoing production support and design continuity.

Substiute Parts

GP12MAKE

C&KIn Stock: 1230GP12MAKE Datasheet

Current PartRFQ

GP12MABE

C&KIn Stock: 1004GP12MABE Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The GP12MABE qualifies as a direct substitute for the GP12MAKE based on identical electrical and mechanical parameters. Substitution is valid when the following criteria are met:

• Circuit configuration: SPDT
• Current rating: 0.4VA (AC/DC)
• Voltage rating: 20V (AC and DC)
• Mounting type: Through Hole, Right Angle
• Actuator type: Round, Plunger
• Termination style: PC Pin
• Ingress protection: IP57
• Operating temperature range: -30°C to 85°C
• Mechanical and electrical life: 40,000 cycles

The GP12MABE maintains all specified electrical and mechanical characteristics of the GP12MAKE while offering the advantage of active product status and RoHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

The GP12MABE is the appropriate substitute for the GP12MAKE in all applications where the specified electrical and mechanical parameters are required. The substitution is supported by:

• Identical electrical performance across all rated parameters
• Matching mechanical specifications and lifecycle ratings
• Active product status ensuring continued availability and supply chain support
• RoHS3 compliance, providing regulatory advantage over the non-compliant GP12MAKE
• Consistent termination and mounting characteristics enabling direct board-level replacement

Selection of the GP12MABE eliminates obsolescence risk while maintaining full functional equivalence.

Frequently Asked Questions (FAQ)

Q: Can the GP12MABE directly replace the GP12MAKE in existing designs?

A: Yes. The GP12MABE provides identical electrical and mechanical performance across all specified parameters, including circuit configuration, current and voltage ratings, mounting type, and lifecycle characteristics. Direct substitution is valid at the board level.

Q: What is the primary advantage of using GP12MABE over GP12MAKE?

A: The GP12MABE is an active product with RoHS3 compliance, whereas the GP12MAKE is obsolete and RoHS non-compliant. The GP12MABE ensures long-term supply availability and regulatory compliance for new designs and production continuity.

Q: Are there packaging differences between these parts?

A: The GP12MAKE packaging specification is not defined. The GP12MABE is supplied in box packaging. Packaging differences do not affect electrical or mechanical compatibility.

Q: What parameters must remain constant for substitution validity?

A: Substitution is valid when the following parameters match: SPDT circuit configuration, 0.4VA current rating, 20V voltage rating (AC/DC), through-hole right-angle mounting, round plunger actuator, PC pin termination, IP57 ingress protection, and -30°C to 85°C operating temperature range.

Q: Is the GP12MABE suitable for applications requiring RoHS compliance?

A: Yes. The GP12MABE carries RoHS3 compliance certification, making it suitable for applications with RoHS regulatory requirements.