Equivalent & Substitute Parts for GP10J-M3/54

Part Overview

The GP10J-M3/54 is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, rated for 600 V DC reverse voltage and 1 A average rectified current in a DO-204AL (DO-41) axial through-hole package. This part is classified as obsolete, with 707 units currently in stock. Due to its obsolete status, identifying equivalent and substitute parts is necessary for design continuity, procurement flexibility, and long-term supply chain management. Active alternatives with identical or superior electrical characteristics are available from multiple manufacturers.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	600	V
Current - Average Rectified (Io)	1	A
Voltage - Forward (Vf) (Max) @ If	1.1	V @ 1 A
Reverse Recovery Time (trr)	3	µs
Current - Reverse Leakage @ Vr	5	µA @ 600 V
Capacitance @ Vr, F	8	pF @ 4V, 1MHz
Package / Case	DO-204AL, DO-41, Axial	—
Mounting Type	Through Hole	—
Operating Temperature - Junction	-65 to 175	°C
Technology	Standard	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the GP10J-M3/54 is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Criteria:

Voltage - DC Reverse (Vr) (Max): 600 V
Current - Average Rectified (Io): 1 A
Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 1 A (or lower)
Package / Case: DO-204AL, DO-41, or Axial equivalent
Mounting Type: Through Hole
Operating Temperature Range: -65°C to 175°C (or wider)
Technology: Standard rectifier diode

Acceptable Variation Parameters:

Reverse Recovery Time (trr): 2 µs to 3 µs (faster recovery acceptable)
Current - Reverse Leakage @ Vr: 1 µA to 5 µA (lower leakage acceptable)
Capacitance @ Vr, F: 8 pF to 15 pF (minor variation acceptable)
Packaging format: Cut Tape (CT), Tape & Reel (TR), or Bulk (different from original but functionally equivalent)

Substitute parts are grouped into two categories: Vishay manufacturer equivalents (same or related base product numbers) and cross-manufacturer alternatives (different manufacturers with identical electrical specifications).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Vr (Max) [V]	Io [A]	Vf (Max) @ If [V]	trr [µs]	Ir @ Vr [µA]	Package	Product Status	Inventory [Pcs]
GP10J-M3/54	Vishay	600	1	1.1 @ 1A	3	5 @ 600V	DO-204AL	Obsolete	707
GP10J-E3/54	Vishay	600	1	1.1 @ 1A	3	5 @ 600V	DO-204AL	Active	13013
1N4005GP-E3/54	Vishay	600	1	1.1 @ 1A	2	5 @ 600V	DO-204AL	Active	60913
1N4005GP-E3/73	Vishay	600	1	1.1 @ 1A	2	5 @ 600V	DO-204AL	Active	12200
1N4005GPE-E3/53	Vishay	600	1	1.1 @ 1A	2	5 @ 600V	DO-204AL	Active	9833
1N4005GPE-E3/54	Vishay	600	1	1.1 @ 1A	2	5 @ 600V	DO-204AL	Active	11758
BYD13JGPHE3/54	Vishay	600	1	1.1 @ 1A	—	5 @ 200V	DO-204AL	Active	807
GP10JE-E3/54	Vishay	600	1	1.1 @ 1A	3	5 @ 600V	DO-204AL	Active	5800
RL105GP-TP	Micro Commercial Co	600	1	1.1 @ 1A	—	5 @ 600V	A-405 Axial	Active	910
1N3613	Microchip Technology	600	1	1.1 @ 1A	—	1 @ 600V	A Axial	Active	638
1N4005G A0G	Taiwan Semiconductor Corporation	600	1	1.0 @ 1A	—	5 @ 600V	DO-204AL	Active	15389

Engineering Selection Recommendations

Primary Recommendation: GP10J-E3/54 (Vishay)

The GP10J-E3/54 is the manufacturer-recommended direct substitute. It maintains identical electrical specifications to the GP10J-M3/54 while offering active product status and significantly higher inventory availability (13,013 units). Both parts share the same base product number (GP10) and are manufactured by Vishay General Semiconductor - Diodes Division. The primary difference is packaging format (Cut Tape versus the original specification), which does not affect electrical performance or mechanical compatibility in through-hole applications. RoHS3 compliance and REACH unaffected status are maintained.

Secondary Recommendation: 1N4005GP-E3/54 or 1N4005GPE-E3/54 (Vishay)

These parts are parametric equivalents with improved reverse recovery time (2 µs versus 3 µs), indicating faster switching characteristics. Both are active products with substantial inventory (60,913 and 11,758 units respectively). The 1N4005 series represents a widely standardized general-purpose rectifier platform. These parts are suitable for applications where faster recovery is beneficial or neutral.

Alternative Recommendation: 1N4005G A0G (Taiwan Semiconductor Corporation)

This part offers active status with the highest inventory availability (15,389 units) and maintains all critical electrical parameters. Forward voltage is marginally lower (1.0 V versus 1.1 V @ 1 A), which is advantageous. Operating temperature range is -55°C to 150°C, which is narrower than the original specification but suitable for most industrial applications. RoHS3 compliance is confirmed.

Cross-Manufacturer Options: RL105GP-TP (Micro Commercial Co) and 1N3613 (Microchip Technology)

These parts meet all mandatory electrical equivalence criteria and are active products. RL105GP-TP uses an alternative axial package designation (A-405) but maintains through-hole mounting compatibility. The 1N3613 offers superior reverse leakage characteristics (1 µA versus 5 µA @ 600 V) but carries RoHS non-compliant status, which may restrict use in regulated applications.

Compliance Considerations:

All recommended primary and secondary substitutes maintain ROHS3 compliance and REACH unaffected status, matching the original part's regulatory profile. The 1N3613 is noted as RoHS non-compliant and should be selected only when regulatory requirements permit.

Frequently Asked Questions (FAQ)

Q: Can I directly replace GP10J-M3/54 with GP10J-E3/54?

A: Yes. Both parts are manufactured by Vishay and share identical electrical specifications (600 V, 1 A, 1.1 V forward voltage, 3 µs recovery time). The primary difference is packaging format (Cut Tape versus the original). In through-hole applications, this difference does not affect functionality or mechanical fit.

Q: What is the difference between the 1N4005 series and the GP10 series?

A: Both are general-purpose 600 V, 1 A rectifier diodes manufactured by Vishay with identical electrical performance. The 1N4005 series is a more widely standardized platform with greater availability. The GP10 series is an alternative designation. Electrically, they are interchangeable when specifications match.

Q: Why do some substitute parts have 2 µs recovery time instead of 3 µs?

A: Faster reverse recovery time (2 µs) indicates improved switching performance and lower switching losses. This is a beneficial characteristic and does not prevent substitution. Parts with 2 µs recovery are suitable for all applications requiring 3 µs or slower recovery.

Q: Is the RL105GP-TP package compatible with my through-hole PCB?

A: Yes. The RL105GP-TP uses an A-405 axial package, which is a through-hole axial format compatible with standard PCB footprints designed for DO-204AL or DO-41 packages. Both are axial lead configurations with identical lead spacing and mounting methodology.

Q: Can I use 1N4005G A0G if my application requires -65°C operation?

A: The 1N4005G A0G has an operating temperature range of -55°C to 150°C, which does not extend to -65°C. If your application requires operation at -65°C, select GP10J-E3/54, 1N4005GP-E3/54, or 1N3613, which all support -65°C minimum junction temperature.

Q: What does RoHS3 compliance mean for my application?

A: RoHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All primary recommendations are RoHS3 compliant. If your application or market requires RoHS compliance, avoid the 1N3613, which is RoHS non-compliant.

Q: Are there inventory advantages to selecting one substitute over another?

A: Yes. The 1N4005GP-E3/54 offers the highest inventory (60,913 units), followed by 1N4005G A0G (15,389 units) and GP10J-E3/54 (13,013 units). For applications with long lead times or high-volume requirements, these parts provide superior supply chain security.

Q: Can I mix different substitute parts in the same design?

A: Yes, provided all parts meet the mandatory equivalence criteria (600 V, 1 A, 1.1 V forward voltage, through-hole axial package). All recommended substitutes are electrically interchangeable. However, for manufacturing consistency and traceability, using a single part number per design is recommended.

Q: What is the significance of the reverse leakage current difference between 1N3613 (1 µA) and other parts (5 µA)?

A: Lower reverse leakage current (1 µA) indicates superior reverse-bias performance and lower power dissipation in high-impedance circuits. This is a beneficial characteristic. The 1N3613 is suitable for applications where leakage minimization is advantageous, though the difference is negligible in most standard rectification applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message