GP1005 Diode Array Equivalent & Substitute Parts

Part Overview

The GP1005 is a diode array rectifier featuring a 1 Pair Common Cathode configuration rated for 600 V DC reverse voltage and 10 A average rectified current per diode. The device is packaged in a Through Hole TO-220-3 form factor and utilizes standard recovery technology. The GP1005 is currently discontinued at DiGi Electronics, necessitating identification of equivalent and substitute components for ongoing design requirements and production continuity.

Substiute Parts

GP1005

Taiwan Semiconductor CorporationIn Stock: 981GP1005 Datasheet

Current PartRFQ

GP1005HC0G

Taiwan Semiconductor CorporationIn Stock: 793GP1005HC0G Datasheet

Parametric EquivalentRFQ

FEP16JT-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1507FEP16JT-E3/45 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the GP1005 are identified based on strict electrical and mechanical parameter compatibility. The primary substitution criteria are:

Critical Parameters for Substitution:

• Diode Configuration: 1 Pair Common Cathode (electrical topology must match)
• Voltage - DC Reverse (Vr) (Max): 600 V (minimum requirement)
• Current - Average Rectified (Io) (per Diode): 10 A or greater (equal or higher rating)
• Mounting Type: Through Hole
• Package / Case: TO-220-3 (mechanical compatibility)
• Operating Temperature Range: -55°C ~ 150°C (minimum requirement)

Substitute parts are grouped into two categories:

Parametric Equivalent: Parts that maintain identical or equivalent electrical specifications with the same base product number lineage, differing only in grade designation or qualification status.

Similar Manufacturer Part: Parts from alternative manufacturers that meet or exceed the critical electrical parameters and maintain mechanical compatibility, though may exhibit variations in secondary characteristics such as forward voltage, reverse leakage, or recovery speed.

Parameter Comparison

Engineering Selection Recommendations

GP1005HC0G (Parametric Equivalent - Recommended Primary Substitute)

The GP1005HC0G is the direct parametric equivalent of the GP1005, manufactured by Taiwan Semiconductor Corporation under the same base product number. This part maintains identical electrical specifications including 600 V reverse voltage, 10 A average rectified current, and 1.1 V forward voltage at 5 A. The GP1005HC0G is currently in active production status with 685 pieces in stock inventory. This part includes AEC-Q101 automotive qualification and Automotive grade designation, providing enhanced reliability documentation. The GP1005HC0G is suitable for direct replacement in all applications where the GP1005 was specified.

FEP16JT-E3/45 (Similar Manufacturer Part - Secondary Substitute)

The FEP16JT-E3/45 from Vishay General Semiconductor - Diodes Division is a similar manufacturer part that meets or exceeds the critical electrical parameters of the GP1005. This part maintains the same 600 V reverse voltage rating and 1 Pair Common Cathode configuration in an identical TO-220-3 package. The FEP16JT-E3/45 provides a higher current rating of 16 A per diode, exceeding the GP1005 requirement of 10 A. The part features fast recovery characteristics (≤500 ns) compared to the standard recovery (>500 ns) of the GP1005, with a specified reverse recovery time of 50 ns. The FEP16JT-E3/45 is currently in active production with 1405 pieces in stock inventory. This part is suitable for applications where the higher current rating and faster recovery characteristics are compatible with circuit design requirements.

Frequently Asked Questions (FAQ)

Q: Can the GP1005HC0G be used as a direct replacement for the GP1005?

A: Yes. The GP1005HC0G is a parametric equivalent with identical electrical specifications. Both parts feature 600 V reverse voltage, 10 A average rectified current per diode, 1.1 V forward voltage at 5 A, and identical operating temperature range. Both are packaged in TO-220-3 and maintain the same 1 Pair Common Cathode configuration. The GP1005HC0G is currently in active production status.

Q: What are the differences between the GP1005 and FEP16JT-E3/45?

A: The primary differences are manufacturer, current rating, and recovery speed. The FEP16JT-E3/45 provides 16 A average rectified current per diode compared to 10 A for the GP1005, and features fast recovery (≤500 ns) versus standard recovery (>500 ns). Both maintain 600 V reverse voltage and TO-220-3 packaging. The FEP16JT-E3/45 exhibits higher forward voltage (1.5 V @ 8 A) and higher reverse leakage current (10 µA @ 600 V) compared to the GP1005 specifications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The GP1005HC0G and FEP16JT-E3/45 are both ROHS3 compliant, matching the compliance status of the original GP1005.

Q: Can the FEP16JT-E3/45 be used in applications designed for the GP1005?

A: The FEP16JT-E3/45 meets the critical electrical parameters of the GP1005 and maintains mechanical compatibility through identical TO-220-3 packaging and 1 Pair Common Cathode configuration. The higher current rating (16 A versus 10 A) and faster recovery speed (≤500 ns versus >500 ns) are compatible with applications designed for the GP1005. Circuit design verification is required to confirm compatibility with forward voltage and reverse leakage characteristics specific to the FEP16JT-E3/45.

Q: What is the difference between standard recovery and fast recovery diodes?

A: Recovery speed refers to the reverse recovery time (trr), which is the time required for a diode to switch from forward conduction to reverse blocking. Standard recovery diodes have trr >500 ns, while fast recovery diodes have trr ≤500 ns. The FEP16JT-E3/45 specifies 50 ns reverse recovery time. Faster recovery reduces switching losses and electromagnetic interference in high-frequency applications.

Q: Are the substitute parts available in the same packaging format?

A: Yes. All substitute parts are packaged in TO-220-3, maintaining mechanical compatibility with the original GP1005. The FEP16JT-E3/45 is supplied in Tube packaging, while the GP1005HC0G is supplied in standard packaging. Both are suitable for Through Hole mounting applications.

Q: What does AEC-Q101 qualification mean?

A: AEC-Q101 is an automotive industry standard qualification for discrete semiconductors. The GP1005HC0G carries AEC-Q101 qualification and Automotive grade designation, indicating compliance with automotive reliability and quality standards. This qualification is not specified for the original GP1005 or the FEP16JT-E3/45.