GMB63H2PC32 Equivalent & Substitute Parts

Part Overview

The GMB63H2PC32 is a thermal magnetic circuit breaker manufactured by Carlo Gavazzi Inc., rated for 32A at 240V AC / 125V DC with a 2-pole lever actuator on DIN rail mounting. This component is classified as Active product status with 1087 units currently in stock. Circuit breakers of this specification are essential for electrical protection in industrial and commercial applications where reliable overcurrent and short-circuit protection is required. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product series.

Substiute Parts

GMB63H2PC32

Carlo Gavazzi Inc.In Stock: 1138GMB63H2PC32 Datasheet

Current PartRFQ

GMB632PC32

Carlo Gavazzi Inc.In Stock: 887GMB632PC32 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GMB63H2PC32 is determined by strict equivalence across the following critical parameters:

• Current Rating: 32A (exact match required)
• Voltage Rating - AC: 240V (exact match required)
• Voltage Rating - DC: 125V (exact match required)
• Breaker Type: Thermal Magnetic (exact match required)
• Number of Poles: 2 (exact match required)
• Actuator Type: Lever (exact match required)
• Mounting Type: DIN Rail (exact match required)
• Series: GMB63 (same product family)
• Manufacturer: Carlo Gavazzi Inc. (same manufacturer)

The substitute part GMB632PC32 meets all these criteria and is therefore classified as a parametric equivalent within the GMB63 series.

Parameter Comparison

Engineering Selection Recommendations

Both GMB63H2PC32 and GMB632PC32 are Active status products from Carlo Gavazzi Inc. within the GMB63 series. The GMB632PC32 carries additional compliance certifications including CSA C22.2 No 5, IEC 60947-2, and UL489, along with RoHS3 compliance status. Both parts maintain identical electrical ratings (32A, 240V AC / 125V DC), mechanical configuration (2-pole, lever actuator, DIN rail mount), and thermal magnetic protection characteristics. Selection between these parts should be based on specific regulatory requirements and compliance mandates applicable to the end application, as well as current inventory availability (GMB63H2PC32: 1087 units; GMB632PC32: 816 units).

Frequently Asked Questions (FAQ)

Q: Can GMB632PC32 be used as a direct replacement for GMB63H2PC32?

A: Yes. Both parts are parametric equivalents with identical current ratings (32A), voltage ratings (240V AC / 125V DC), pole configuration (2-pole), actuator type (lever), mounting method (DIN rail), and breaker technology (thermal magnetic). Both are Active status products from Carlo Gavazzi Inc. within the GMB63 series.

Q: What are the key differences between these two part numbers?

A: The primary differences are in the base product number designation (GMB63H2 versus GMB632) and compliance certifications. GMB632PC32 includes documented compliance with CSA C22.2 No 5, IEC 60947-2, and UL489 standards, plus RoHS3 compliance status. Electrical and mechanical specifications are identical.

Q: Are there any packaging or inventory considerations?

A: Both parts are supplied in Box packaging. GMB63H2PC32 has 1087 units in stock, while GMB632PC32 has 816 units available. Packaging format is consistent between both options.

Q: What electrical parameters must match for substitution?

A: Current rating (32A), AC voltage (240V), DC voltage (125V), pole count (2), actuator type (lever), breaker type (thermal magnetic), and mounting type (DIN rail) must all match exactly for valid substitution within this product category.

Q: Are both parts suitable for the same applications?

A: Both parts are rated for identical electrical and mechanical specifications. Application suitability depends on compliance requirements specific to the installation location and regulatory jurisdiction. GMB632PC32 carries additional international and regional certifications that may be required in certain markets.