GLL4735-E3/96 Equivalent & Substitute Parts

Part Overview

The GLL4735-E3/96 is a Zener diode rated at 6.2 V nominal voltage with 1 W maximum power dissipation, manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component is packaged in MELF DO-213AB configuration and is designed for voltage regulation and protection applications in electronic circuits. The part is currently Active in product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across the specified parameter range.

Substiute Parts

GLL4735-E3/96

Vishay General Semiconductor - Diodes DivisionIn Stock: 909GLL4735-E3/96 Datasheet

Current PartRFQ

GLL4735A-E3/96

Vishay General Semiconductor - Diodes DivisionIn Stock: 23236GLL4735A-E3/96 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the GLL4735-E3/96 is determined by equivalence across the following critical parameters:

• Zener Voltage (Nominal): 6.2 V
• Maximum Power Dissipation: 1 W
• Package Type: DO-213AB MELF surface mount
• Operating Temperature Range: -65°C to 150°C
• Impedance (Maximum): 2 Ohms
• Reverse Leakage Current: 50 µA @ 3 V
• Regulatory Compliance: RoHS3 Compliant, REACH Unaffected

The substitute part GLL4735A-E3/96 maintains identical electrical performance in voltage regulation, power handling, and thermal characteristics. The primary distinction between the main part and substitute is the voltage tolerance specification and packaging format (Tape & Reel versus Cut Tape). Both parts share the same base product number (GLL4735) and are manufactured by the same supplier.

Parameter Comparison

Engineering Selection Recommendations

Both GLL4735-E3/96 and GLL4735A-E3/96 are Active products with full RoHS3 compliance and REACH unaffected status, qualifying them for equivalent circuit applications. The GLL4735A-E3/96 provides tighter voltage tolerance (±5% versus ±10%), which may be advantageous in applications requiring stricter voltage regulation accuracy. Selection between these parts should be based on packaging requirements (Tape & Reel versus Cut Tape) and tolerance specifications appropriate to the circuit design. Both parts maintain identical electrical performance in maximum power dissipation, impedance, reverse leakage current, and operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can GLL4735A-E3/96 be used as a direct replacement for GLL4735-E3/96?

A: Yes. Both parts share identical electrical specifications for zener voltage (6.2 V), maximum power (1 W), impedance (2 Ohms), reverse leakage current (50 µA @ 3 V), and operating temperature range (-65°C to 150°C). The primary difference is packaging format and voltage tolerance. The substitute part features tighter tolerance (±5% versus ±10%).

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape wound on reels, suitable for high-volume automated assembly. Cut Tape (CT) packaging provides components on tape segments cut to specific lengths, suitable for lower-volume applications or manual assembly. Both formats use identical MELF DO-213AB component packages.

Q: Does the tighter tolerance of GLL4735A-E3/96 affect circuit compatibility?

A: The ±5% tolerance of GLL4735A-E3/96 is a subset of the ±10% tolerance range of GLL4735-E3/96. Applications designed for the ±10% tolerance specification will operate within acceptable parameters with the ±5% tolerance substitute part.

Q: Are both parts RoHS3 compliant?

A: Yes. Both GLL4735-E3/96 and GLL4735A-E3/96 are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited) and REACH Unaffected status.

Q: What is the operating temperature range for both parts?

A: Both parts operate across the identical temperature range of -65°C to 150°C, ensuring thermal compatibility in equivalent applications.