GL7X1AX-SF RF Antenna Equivalent & Substitute Parts

Part Overview

The GL7X1AX-SF is a multi-band dome RF antenna manufactured by PCTEL, Inc., designed for wide-band cellular, navigation, and WiFi applications. This panel-mount antenna operates across 12 frequency bands ranging from 617MHz to 5.95GHz, supporting 2G, 3G, 5G, Bluetooth, Cellular, GNSS, GPS, and LTE standards. The part is currently active in production with ROHS3 compliance and IP67 ingress protection rating. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across frequency response, gain characteristics, termination type, mounting configuration, and environmental specifications.

Substiute Parts

GL7X1AX-SF

PCTEL, Inc.In Stock: 841GL7X1AX-SF Datasheet

Current PartRFQ

GL6X1AX-SF

PCTEL, Inc.In Stock: 757GL6X1AX-SF Datasheet

Parametric EquivalentRFQ

GL6X1AX-SFW

PCTEL, Inc.In Stock: 860GL6X1AX-SFW Datasheet

Parametric EquivalentRFQ

GL9X1AX-SFW

PCTEL, Inc.In Stock: 996GL9X1AX-SFW Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the GL7X1AX-SF are qualified based on the following critical parameters that determine functional equivalence:

Electrical Parameters:

• Frequency band coverage: 12 bands spanning 617MHz to 5.95GHz
• Gain characteristics across all frequency bands
• VSWR specification of 2
• Maximum power rating of 50W
• Termination configuration: SMA Male (2) and RP-SMA Male (1)

Mechanical Parameters:

• Antenna type: Dome configuration
• Mounting method: Panel Mount
• Physical height: 3.012" (76.50mm)
• Cable length: 5.18m

Environmental & Compliance Parameters:

• Ingress Protection: IP67
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• ECCN and HTSUS classifications

Application Scope:

• RF Family/Standard: Cellular, Navigation, WiFi
• Frequency Group: Wide Band

All substitute parts maintain identical electrical performance across the specified frequency bands, identical mechanical mounting and dimensional specifications, and identical environmental protection and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts—GL6X1AX-SF, GL6X1AX-SFW, and GL9X1AX-SFW—maintain full electrical and mechanical equivalence to the GL7X1AX-SF across all critical parameters. Selection among these alternatives is based on application scope and inventory availability:

GL6X1AX-SF: Supports the full application range of the main part (2G, 3G, 5G, Bluetooth, Cellular, GNSS, GPS, LTE) with 692 units in stock. This part provides direct functional replacement with identical specifications.

GL6X1AX-SFW: Supports GNSS and LTE applications with 778 units in stock. This part is suitable for applications requiring only GNSS and LTE functionality.

GL9X1AX-SFW: Supports GNSS and LTE applications with 975 units in stock and belongs to the Trooper series. This part is suitable for applications requiring only GNSS and LTE functionality with the highest inventory availability.

All parts maintain ROHS3 compliance, IP67 ingress protection, and identical electrical performance across the 12-band frequency spectrum. Selection should be based on specific application requirements and connector termination needs.

Frequently Asked Questions (FAQ)

Q: Can GL6X1AX-SF be used as a direct replacement for GL7X1AX-SF?

A: Yes. GL6X1AX-SF maintains identical electrical parameters, frequency band coverage, gain characteristics, VSWR specification, termination configuration, mechanical dimensions, mounting type, and environmental protection rating. Both parts support the full range of 2G, 3G, 5G, Bluetooth, Cellular, GNSS, GPS, and LTE applications.

Q: What is the difference between GL6X1AX-SFW and GL9X1AX-SFW?

A: Both parts maintain identical electrical and mechanical specifications. The primary difference is series designation (GL9X1AX-SFW belongs to the Trooper series) and inventory availability. GL9X1AX-SFW has 975 units in stock compared to 778 units for GL6X1AX-SFW. Both support GNSS and LTE applications only.

Q: Are the substitute parts suitable for applications requiring 2G, 3G, and 5G support?

A: GL6X1AX-SF supports all 2G, 3G, 5G, Bluetooth, Cellular, GNSS, GPS, and LTE applications. GL6X1AX-SFW and GL9X1AX-SFW support GNSS and LTE applications only and are not suitable for applications requiring 2G, 3G, 5G, Bluetooth, Cellular, or GPS support.

Q: Do all substitute parts use the same termination configuration?

A: Yes. All parts—GL7X1AX-SF, GL6X1AX-SF, GL6X1AX-SFW, and GL9X1AX-SFW—feature identical termination: SMA Male (2) and RP-SMA Male (1).

Q: Are the substitute parts panel-mount compatible with the same installation footprint?

A: Yes. All substitute parts maintain identical panel-mount configuration and maximum height of 3.012" (76.50mm), ensuring mechanical compatibility with existing installations.

Q: What is the cable length for all substitute parts?

A: All parts feature a 5.18m cable length.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. GL7X1AX-SF, GL6X1AX-SF, GL6X1AX-SFW, and GL9X1AX-SFW are all ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: What is the maximum power rating for these antennas?

A: All parts support a maximum power rating of 50W.

Q: Do the substitute parts maintain the same VSWR specification?

A: Yes. All parts maintain a VSWR specification of 2.