GL41DHE3/97 Equivalent & Substitute Parts

Part Overview

The GL41DHE3/97 is a general-purpose rectifier diode manufactured by Vishay General Semiconductor - Diodes Division, part of the SUPERECTIFIER® series. This surface mount diode is rated for 200 V DC reverse voltage and 1 A average rectified current in a DO-213AB (MELF glass) package. The part is Active status and ROHS3 compliant. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring 200 V, 1 A rectification in surface mount configurations.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	200	V
Current - Average Rectified (Io)	1	A
Voltage - Forward (Vf) (Max) @ If	1.1 @ 1 A	V
Speed	Standard Recovery >500ns, > 200mA (Io)	-
Current - Reverse Leakage @ Vr	10	µA @ 200 V
Capacitance @ Vr, F	8	pF @ 4V, 1MHz
Mounting Type	Surface Mount	-
Package / Case	DO-213AB, MELF (Glass)	-
Operating Temperature - Junction	-65 to 175	°C
RoHS Status	ROHS3 Compliant	-
Moisture Sensitivity Level (MSL)	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitute parts for the GL41DHE3/97 are grouped based on electrical and mechanical parameter equivalence. The primary substitution criteria are:

Electrical Parameters (Must Match):

Voltage - DC Reverse (Vr) (Max): 200 V
Current - Average Rectified (Io): 1 A
Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 1 A
Speed: Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr: 10 µA @ 200 V
Capacitance @ Vr, F: 8 pF @ 4V, 1MHz
Operating Temperature - Junction: -65°C to 175°C

Mechanical Parameters (Must Match):

Mounting Type: Surface Mount
Package / Case: DO-213AB, MELF (Glass)

Compliance Parameters:

RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parametric equivalents (1N6480-E3/96, BYM10-200-E3/96, BYM10-200-E3/97, GL41D-E3/96) meet all electrical and mechanical criteria and maintain full compliance. The manufacturer-recommended substitute (1N5614US) differs in package type (D-5A vs. DO-213AB), forward voltage measurement conditions, reverse leakage specification, and RoHS compliance status, requiring engineering evaluation for specific applications.

Parameter Comparison

Parameter	GL41DHE3/97	1N6480-E3/96	BYM10-200-E3/96	BYM10-200-E3/97	GL41D-E3/96	1N5614US
Manufacturer	Vishay	Vishay	Vishay	Vishay	Vishay	Microchip
Voltage - DC Reverse (Vr) (Max)	200 V	200 V	200 V	200 V	200 V	200 V
Current - Average Rectified (Io)	1 A	1 A	1 A	1 A	1 A	1 A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 1 A	1.1 V @ 1 A	1.1 V @ 1 A	1.1 V @ 1 A	1.1 V @ 1 A	1.3 V @ 3 A
Speed	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	10 µA @ 200 V	10 µA @ 200 V	10 µA @ 200 V	10 µA @ 200 V	10 µA @ 200 V	500 nA @ 200 V
Capacitance @ Vr, F	8 pF @ 4V, 1MHz	8 pF @ 4V, 1MHz	8 pF @ 4V, 1MHz	8 pF @ 4V, 1MHz	8 pF @ 4V, 1MHz	-
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	DO-213AB, MELF (Glass)	DO-213AB, MELF (Glass)	DO-213AB, MELF (Glass)	DO-213AB, MELF (Glass)	DO-213AB, MELF (Glass)	SQ-MELF, A (D-5A)
Operating Temperature - Junction	-65 to 175°C	-65 to 175°C	-65 to 175°C	-65 to 175°C	-65 to 175°C	-65 to 200°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Technology	Standard	Standard	Avalanche	Avalanche	Standard	Standard

Engineering Selection Recommendations

Parametric Equivalents (Direct Substitutes):

The parts 1N6480-E3/96, BYM10-200-E3/96, BYM10-200-E3/97, and GL41D-E3/96 are parametric equivalents to the GL41DHE3/97. All four parts maintain identical electrical specifications (200 V reverse voltage, 1 A average rectified current, 1.1 V forward voltage at 1 A, standard recovery speed, 10 µA reverse leakage, 8 pF capacitance) and identical mechanical specifications (DO-213AB MELF glass package, surface mount). All are ROHS3 compliant with MSL 1 rating. These parts are suitable for direct substitution in applications where the GL41DHE3/97 is specified.

The BYM10-200-E3/96 and BYM10-200-E3/97 employ Avalanche technology, while the GL41DHE3/97, 1N6480-E3/96, and GL41D-E3/96 use Standard technology. Both technology types meet the specified electrical parameters and are functionally interchangeable for the stated 200 V, 1 A application.

Manufacturer-Recommended Substitute (1N5614US):

The 1N5614US is designated as a manufacturer-recommended substitute but differs in three key aspects: (1) package type is D-5A (SQ-MELF, A) rather than DO-213AB, (2) forward voltage is specified at 1.3 V @ 3 A rather than 1.1 V @ 1 A, and (3) RoHS compliance status is non-compliant. The 1N5614US exhibits superior reverse leakage performance (500 nA @ 200 V vs. 10 µA @ 200 V) and extended operating temperature range (-65°C to 200°C vs. -65°C to 175°C). Selection of the 1N5614US requires confirmation that the D-5A package is compatible with the PCB layout and that RoHS non-compliance is acceptable for the application.

Frequently Asked Questions (FAQ)

Q: Can the 1N6480-E3/96 be used as a direct replacement for the GL41DHE3/97?

A: Yes. The 1N6480-E3/96 is a parametric equivalent with identical electrical and mechanical specifications. Both parts are rated for 200 V reverse voltage, 1 A average rectified current, 1.1 V forward voltage at 1 A, and are packaged in DO-213AB MELF glass for surface mount applications. Both are ROHS3 compliant.

Q: What is the difference between the BYM10-200-E3/96 and BYM10-200-E3/97?

A: Both parts are parametric equivalents with identical electrical and mechanical specifications. The difference is in the manufacturing date code suffix (-E3/96 vs. -E3/97). Both are suitable for substitution.

Q: Why is the 1N5614US listed as a manufacturer-recommended substitute if it has a different package?

A: The 1N5614US meets the core electrical requirements (200 V, 1 A) but uses a D-5A package instead of DO-213AB. This part is recommended only when the D-5A package is compatible with the circuit board layout and when RoHS non-compliance is acceptable for the application.

Q: Are all substitute parts ROHS3 compliant?

A: Four of the five substitute parts (1N6480-E3/96, BYM10-200-E3/96, BYM10-200-E3/97, GL41D-E3/96) are ROHS3 compliant. The 1N5614US is RoHS non-compliant and requires compliance verification before use.

Q: What is the difference between Standard and Avalanche technology in these diodes?

A: Both technology types meet the specified electrical parameters for this application. The GL41DHE3/97, 1N6480-E3/96, and GL41D-E3/96 use Standard technology. The BYM10-200-E3/96 and BYM10-200-E3/97 use Avalanche technology. Both are functionally equivalent for 200 V, 1 A rectification.

Q: Can I substitute the GL41DHE3/97 with the 1N5614US without circuit modifications?

A: The 1N5614US has a different package type (D-5A vs. DO-213AB). PCB layout compatibility must be confirmed. Additionally, the 1N5614US is RoHS non-compliant, which may conflict with application or regulatory requirements.

Q: What does MSL 1 (Unlimited) mean?

A: Moisture Sensitivity Level 1 (Unlimited) indicates that the component has unlimited shelf life and does not require special moisture-control handling or storage conditions.

Q: Are the parametric equivalents interchangeable in all applications?

A: Yes, the four parametric equivalents (1N6480-E3/96, BYM10-200-E3/96, BYM10-200-E3/97, GL41D-E3/96) are interchangeable in all applications where the GL41DHE3/97 is specified, provided the DO-213AB package footprint is used on the PCB.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message