GL-2100C1 Equivalent & Substitute Parts Reference

Part Overview

The GL-2100C1 is a power entry connector receptacle manufactured by KEMET, designed for IEC 320-C14 panel mount applications. This component functions as a filtered AC power inlet with male blades, incorporating EMI/RFI filtering for commercial applications. The part is designated as Last Time Buy, indicating discontinued production status. Identification of equivalent substitute parts is necessary to ensure continued component availability for new designs, maintenance, and production continuity.

Substiute Parts

GL-2100C1

KEMETIn Stock: 947GL-2100C1 Datasheet

Current PartRFQ

10EJH1

TE Connectivity Corcom FiltersIn Stock: 108110EJH1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GL-2100C1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: IEC 320-C14
• Connector Type: Receptacle, Male Blades
• Number of Positions: 3
• Filter Type: Filtered (EMI, RFI) - Commercial
• Current Rating - Filter: 10A
• Mounting Type: Panel Mount, Flange
• Features: Front or Rear Side Mount

Allowable Variations:

• Termination method (Solder Eyelet vs. Quick Connect)
• Packaging format (Tray vs. Bulk)
• Approval agencies (subset or superset of CSA, TUV, UL)

The substitute part 10EJH1 manufactured by TE Connectivity Corcom Filters satisfies all mandatory matching parameters and represents a direct functional equivalent with an alternative termination interface.

Parameter Comparison

Engineering Selection Recommendations

The 10EJH1 qualifies as a direct functional substitute for the GL-2100C1 based on electrical and mechanical parameter alignment. Both components meet identical specifications for connector style, filtering characteristics, current capacity, and mounting configuration.

Compliance Considerations:

• Both parts maintain ROHS3 compliance
• The 10EJH1 carries CSA, UL, and VDE approvals, providing equivalent or enhanced regulatory coverage compared to the GL-2100C1 (CSA, TUV, UL)
• Both components are rated for commercial EMI/RFI filtering applications

Termination Interface Difference: The primary distinction between these parts is the termination method. The GL-2100C1 uses solder eyelet termination, while the 10EJH1 employs quick connect terminals (0.250" / 6.3mm). This difference requires circuit board layout or connector interface modification during component substitution.

Availability Status: The GL-2100C1 is designated Last Time Buy, indicating production discontinuation. The 10EJH1 maintains Active product status with confirmed inventory availability, supporting long-term supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can the 10EJH1 directly replace the GL-2100C1 without circuit board modification?

A: Electrical and mechanical compatibility is confirmed for all critical parameters. However, the termination interface differs: GL-2100C1 uses solder eyelet termination while 10EJH1 uses quick connect terminals. Circuit board layout or connector interface adaptation is required.

Q: Are the filtering characteristics identical between these parts?

A: Both components are specified as Filtered (EMI, RFI) - Commercial with 10A filter current rating. Filtering performance parameters are equivalent.

Q: What is the significance of the different approval agencies?

A: The GL-2100C1 carries CSA, TUV, and UL approvals. The 10EJH1 carries CSA, UL, and VDE approvals. Both sets of certifications satisfy commercial AC power connector standards. The 10EJH1 includes VDE certification, which may provide additional regulatory coverage in specific markets.

Q: Why is the GL-2100C1 marked as Last Time Buy?

A: Last Time Buy designation indicates the manufacturer has discontinued production. This status necessitates identification of active substitute components for ongoing design and production requirements.

Q: Are there packaging differences between these parts?

A: Yes. The GL-2100C1 is supplied in Tray packaging, while the 10EJH1 is supplied in Bulk packaging. Packaging format does not affect electrical or mechanical performance.

Q: What is the panel cutout dimension requirement?

A: Both parts specify Variable Size panel cutout dimensions, indicating that cutout specifications are determined by the specific connector flange design rather than a fixed standard dimension.