GL-2030F Equivalent & Substitute Parts

Part Overview

The GL-2030F is a Power Entry Connector Receptacle manufactured by KEMET, designed for IEC 320-C14 panel mount applications with filtered EMI/RFI protection. This component functions as a male blade receptacle for AC power inlet connections in commercial equipment. The part is designated as Last Time Buy, indicating discontinued production status. Identification of equivalent substitute parts is necessary to ensure continued component availability for new designs, repairs, and production continuity.

Substiute Parts

GL-2030F

KEMETIn Stock: 1092GL-2030F Datasheet

Current PartRFQ

3-6609006-3

TE Connectivity Corcom FiltersIn Stock: 11303-6609006-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the GL-2030F are identified based on electrical and mechanical compatibility within the IEC 320-C14 power entry connector category. The primary substitution criteria are:

Electrical Compatibility:

• Connector style: IEC 320-C14
• Connector type: Receptacle with male blades
• Number of positions: 3
• Filter type: Filtered (EMI, RFI) - Commercial
• Current rating: 3A filter rating

Mechanical Compatibility:

• Mounting configuration: Panel mount with flange
• Features: Front or rear side mount capability
• Panel cutout dimensions: Variable size

Regulatory Compliance:

• RoHS3 compliance
• Approval agencies: CSA, UL (minimum common certifications)

The substitute part 3-6609006-3 (TE Connectivity Corcom Filters) meets all core electrical and mechanical parameters. The primary difference is termination method: the GL-2030F uses solder eyelet termination, while the substitute uses wire leads. This difference requires evaluation based on circuit board design and assembly process requirements.

Parameter Comparison

Engineering Selection Recommendations

The GL-2030F is classified as Last Time Buy, making the 3-6609006-3 the primary substitute for ongoing production and design requirements. The substitute part maintains active product status with TE Connectivity Corcom Filters, ensuring long-term availability.

Compliance Alignment: Both parts achieve ROHS3 compliance and hold CSA and UL certifications. The substitute part adds VDE certification, providing expanded regulatory coverage for European markets. The GL-2030F includes TUV certification, which is not listed for the substitute.

Termination Consideration: The GL-2030F employs solder eyelet termination for direct PCB mounting. The 3-6609006-3 uses wire leads, requiring connection through wire harness or terminal block integration. This difference necessitates circuit board redesign if direct solder mounting is required in the original application.

Electrical Specifications: The substitute part explicitly specifies 3A current rating and 250VAC voltage rating at the appliance inlet. The GL-2030F does not provide these specifications in the available data, though both maintain 3A filter current rating.

Frequently Asked Questions (FAQ)

Q: Can the 3-6609006-3 directly replace the GL-2030F without circuit board modification?

A: Direct replacement depends on termination method compatibility. The GL-2030F uses solder eyelet termination for PCB mounting, while the 3-6609006-3 uses wire leads. If the original design requires solder eyelet connection, the substitute requires integration through wire harness or terminal block assembly.

Q: Are both parts certified for the same regulatory standards?

A: Both parts hold CSA and UL certifications. The GL-2030F includes TUV certification; the 3-6609006-3 includes VDE certification. For applications requiring TUV certification specifically, the GL-2030F certification should be verified as non-transferable to the substitute.

Q: What is the significance of the Last Time Buy status for the GL-2030F?

A: Last Time Buy designation indicates KEMET has discontinued production of this part. Existing inventory is limited to 1053 pieces. The 3-6609006-3 is classified as Active, ensuring continued manufacturing and availability from TE Connectivity.

Q: Are the electrical specifications identical between both parts?

A: Both parts maintain 3A filter current rating and IEC 320-C14 connector compatibility. The 3-6609006-3 explicitly specifies 250VAC appliance inlet voltage rating. The GL-2030F does not provide appliance inlet voltage specification in available documentation.

Q: What packaging differences exist between these parts?

A: The GL-2030F is supplied in Tray packaging, while the 3-6609006-3 is supplied in Bulk packaging. Packaging selection affects inventory management and component handling procedures.

Q: Can both parts be used interchangeably in new designs?

A: Electrical and mechanical compatibility is confirmed for IEC 320-C14 panel mount applications with 3A filtered protection. Termination method differences require design evaluation. The 3-6609006-3 is recommended for new designs due to active product status and long-term availability assurance.