GL-2030ET Equivalent & Substitute Parts

Part Overview

The GL-2030ET is a Power Entry Connector Receptacle manufactured by KEMET, designed for IEC 320-C14 panel mount applications with filtered EMI/RFI protection. This component functions as a male blade receptacle for AC power inlet connections in commercial equipment. The part is designated as Last Time Buy, indicating discontinued production status. Identification of equivalent substitute parts is necessary to ensure continued component availability for new designs, repairs, and production continuity.

Substiute Parts

GL-2030ET

KEMETIn Stock: 1073GL-2030ET Datasheet

Current PartRFQ

3-6609006-3

TE Connectivity Corcom FiltersIn Stock: 11303-6609006-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the GL-2030ET is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: IEC 320-C14
• Connector Type: Receptacle, Male Blades
• Number of Positions: 3
• Filter Type: Filtered (EMI, RFI) - Commercial
• Current Rating - Filter: 3A
• Mounting Type: Panel Mount, Flange
• Approval Agency: CSA, UL (minimum requirement)
• RoHS Status: ROHS3 Compliant

The substitute part 3-6609006-3 manufactured by TE Connectivity Corcom Filters meets all mandatory matching parameters. Termination method differs (Wire Leads versus Solder Eyelet) and mounting orientation flexibility differs (Front or Rear Side Mount versus Rear Side Mount only), representing design variations that do not prevent functional substitution in panel mount applications.

Parameter Comparison

Engineering Selection Recommendations

The GL-2030ET is classified as Last Time Buy, indicating end-of-life status. The substitute part 3-6609006-3 is classified as Active, ensuring ongoing availability and supply chain continuity.

Both parts satisfy CSA and UL approval requirements for commercial AC power connector applications. The substitute part carries additional VDE certification, providing expanded geographic compliance coverage.

Selection between these parts depends on termination method requirements:

GL-2030ET (Solder Eyelet Termination): Suitable for applications requiring direct PCB solder connection or eyelet-based termination to internal wiring harnesses.

3-6609006-3 (Wire Leads Termination): Suitable for applications utilizing wire lead connections to terminal blocks, screw terminals, or wire harness connectors. Offers mounting orientation flexibility (front or rear side mount) compared to rear-side-only mounting of the GL-2030ET.

Both parts accommodate 3A filtered current at 250VAC and maintain identical IEC 320-C14 connector geometry and electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can the 3-6609006-3 directly replace the GL-2030ET in existing designs?

A: Direct replacement depends on termination method compatibility. If the original design uses solder eyelet termination to a PCB, the wire lead termination of the 3-6609006-3 requires circuit board redesign or intermediate terminal block adaptation. If the design uses wire harness connections, the 3-6609006-3 is directly compatible.

Q: Are the electrical specifications identical between these parts?

A: Yes. Both parts are rated for 3A filtered current, operate at 250VAC, contain 3 positions, and provide identical EMI/RFI filtering for commercial applications. Both comply with IEC 320-C14 connector standards.

Q: What is the difference between "Rear Side Mount" and "Front or Rear Side Mount"?

A: The GL-2030ET is restricted to rear-side panel mounting only. The 3-6609006-3 offers flexibility for either front-side or rear-side panel mounting, allowing greater design flexibility in equipment layout.

Q: Do both parts meet the same regulatory approvals?

A: Both parts carry CSA and UL certifications. The 3-6609006-3 includes additional VDE certification, which may be required for European market applications.

Q: Why is the GL-2030ET designated as Last Time Buy?

A: Last Time Buy status indicates KEMET has discontinued production of this part. The 3-6609006-3 remains in active production by TE Connectivity Corcom Filters, ensuring long-term availability.

Q: Are there any inventory considerations?

A: The GL-2030ET has 984 pieces in stock (new original). The 3-6609006-3 has 1063 pieces in stock (new original). Both are currently available, though the GL-2030ET supply is finite due to Last Time Buy status.

Q: What is the panel cutout dimension requirement?

A: Both parts specify Variable Size panel cutout dimensions. Specific cutout dimensions must be obtained from the respective manufacturer datasheets based on the specific connector variant selected.