GL-2030C3 Equivalent & Substitute Parts

Part Overview

The GL-2030C3 is a Power Entry Connector Receptacle manufactured by KEMET, designed for IEC 320-C14 panel mount applications with filtered EMI/RFI protection. This component functions as a male blade receptacle for AC power inlet connections in commercial equipment requiring electromagnetic interference suppression.

The GL-2030C3 carries a Last Time Buy product status, indicating discontinued production. Identification of equivalent substitute parts is necessary to ensure continued availability for new designs, maintenance, and production continuity.

Substiute Parts

GL-2030C3

KEMETIn Stock: 787GL-2030C3 Datasheet

Current PartRFQ

3-6609006-3

TE Connectivity Corcom FiltersIn Stock: 11303-6609006-3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GL-2030C3 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Connector Style: IEC 320-C14
• Connector Type: Receptacle, Male Blades
• Number of Positions: 3
• Filter Type: Filtered (EMI, RFI) - Commercial
• Current Rating - Filter: 3A
• Mounting Type: Panel Mount, Flange
• Features: Front or Rear Side Mount

Acceptable Variation:

• Termination method (Solder Eyelet vs. Wire Leads) is acceptable based on circuit board integration requirements
• Packaging format (Tray vs. Bulk) does not affect functional compatibility

The substitute part 3-6609006-3 manufactured by TE Connectivity Corcom Filters satisfies all mandatory matching parameters and represents a functionally equivalent alternative.

Parameter Comparison

Engineering Selection Recommendations

GL-2030C3 (KEMET): Suitable for existing inventory management and legacy system support. Last Time Buy status indicates limited future availability. Current inventory: 722 pieces.

3-6609006-3 (TE Connectivity Corcom Filters): Recommended for new designs and ongoing production requirements. Active product status ensures long-term availability and supply chain stability. Current inventory: 1,063 pieces. Termination method (Wire Leads) requires circuit board design accommodation compared to Solder Eyelet termination of the GL-2030C3.

Both parts maintain ROHS3 compliance and carry equivalent regulatory approvals (CSA, UL). The TE Connectivity substitute includes VDE certification in addition to CSA and UL approvals.

Frequently Asked Questions (FAQ)

Q: Can the 3-6609006-3 directly replace the GL-2030C3 in existing designs?

A: Functional compatibility is confirmed for all electrical and mechanical parameters. The primary design consideration is termination method: the GL-2030C3 uses Solder Eyelet termination while the 3-6609006-3 uses Wire Leads. Circuit board layout and connection methodology must accommodate this difference.

Q: What is the significance of the Last Time Buy status for GL-2030C3?

A: Last Time Buy indicates KEMET has discontinued production of this part. Existing inventory (722 pieces) represents the final available stock. For applications requiring long-term component availability, transition to the 3-6609006-3 is recommended.

Q: Are the regulatory certifications equivalent between these parts?

A: Both parts carry CSA and UL approvals. The 3-6609006-3 includes additional VDE certification. All certifications meet commercial AC power connector standards for the IEC 320-C14 interface.

Q: Does the termination difference affect electrical performance?

A: No. Solder Eyelet and Wire Leads termination methods provide equivalent electrical connectivity. Selection depends on circuit board design and assembly process requirements.

Q: What is the current rating specification for these connectors?

A: Both parts are rated for 3A at the filter stage. This specification applies to the EMI/RFI filtering circuit integrated into the connector assembly.

Q: Are packaging differences significant for component selection?

A: Packaging format (Tray vs. Bulk) affects logistics and inventory management but does not impact functional performance or compatibility. Selection should align with procurement and assembly workflow requirements.