GIB2404HE3_A/I Equivalent & Substitute Parts

Part Overview

The GIB2404HE3_A/I is a diode array rectifier manufactured by Vishay General Semiconductor - Diodes Division, configured as a 1 Pair Common Cathode design with 200V reverse voltage rating and 16A average rectified current per diode. The device is housed in a TO-263-3 D2PAK surface mount package and features fast recovery characteristics with 35 ns reverse recovery time.

This part carries a Last Time Buy product status, indicating discontinued production. Identification of equivalent and substitute parts is necessary to ensure design continuity and procurement availability for new production runs and ongoing support of existing applications.

Key Parameters

Parameter	Value
Diode Configuration	1 Pair Common Cathode
Voltage - DC Reverse (Vr) (Max)	200 V
Current - Average Rectified (Io) (per Diode)	16 A
Voltage - Forward (Vf) (Max) @ If	975 mV @ 8 A
Speed	Fast Recovery ≤ 500ns, > 200mA (Io)
Reverse Recovery Time (trr)	35 ns
Current - Reverse Leakage @ Vr	5 µA @ 200 V
Operating Temperature - Junction	-65°C ~ 150°C
Package / Case	TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the GIB2404HE3_A/I is determined by the following critical parameters:

Primary Substitution Criteria:

Diode Configuration: 1 Pair Common Cathode (mandatory match)
Package / Case: TO-263-3, D2PAK (mandatory match for PCB compatibility)
Voltage - DC Reverse (Vr) (Max): 200 V minimum (equal or higher acceptable)
Current - Average Rectified (Io) (per Diode): 16 A minimum (equal or higher acceptable)
Speed: Fast Recovery ≤ 500ns, > 200mA (Io) (mandatory match)
Mounting Type: Surface Mount (mandatory match)

Secondary Compatibility Parameters:

Reverse Recovery Time (trr): Lower values indicate improved performance
Voltage - Forward (Vf): Lower values indicate reduced power dissipation
Operating Temperature Range: Extended ranges provide design margin
Technology: Standard or Super Barrier technologies both acceptable
Compliance: ROHS3 and REACH status maintained across all substitutes

Substitute parts are grouped by current rating capability. Parts rated at 16A or higher provide direct replacement capability. Parts rated below 16A are listed as reduced-current alternatives suitable only for applications with lower current requirements.

Parameter Comparison

Part Number	Manufacturer	Vr (Max)	Io (per Diode)	Vf (Max)	trr (ns)	Ir @ Vr	Tj (Max)	Technology	Product Status
GIB2404HE3_A/I	Vishay	200 V	16 A	975 mV @ 8 A	35 ns	5 µA @ 200 V	150°C	Standard	Last Time Buy
GIB2404HM3/I	Vishay	200 V	16 A	975 mV @ 8 A	35 ns	5 µA @ 200 V	150°C	Standard	Active
FFB20UP20DN-F085	onsemi	200 V	10 A	1.15 V @ 10 A	40 ns	10 µA @ 200 V	175°C	Standard	Active
MURB1620CTT4G	onsemi	200 V	8 A	975 mV @ 8 A	35 ns	5 µA @ 200 V	175°C	Standard	Active
SBR10200CTB-13-G	Diodes Incorporated	200 V	5 A	920 mV @ 5 A	20 ns	5 µA @ 200 V	175°C	Super Barrier	Active
SBR20A200CTB	Diodes Incorporated	200 V	10 A	960 mV @ 20 A	30 ns	100 µA @ 200 V	175°C	Super Barrier	Active
SBR20A200CTB-13	Diodes Incorporated	200 V	10 A	960 mV @ 20 A	30 ns	100 µA @ 200 V	175°C	Super Barrier	Active
STTH2003CGY-TR	STMicroelectronics	300 V	10 A	1.25 V @ 10 A	40 ns	20 µA @ 300 V	175°C	Standard	Active
STTH3002CG	STMicroelectronics	200 V	15 A	1.05 V @ 15 A	22 ns	20 µA @ 200 V	175°C	Standard	Active
STTH3002CG-TR	STMicroelectronics	200 V	15 A	1.05 V @ 15 A	22 ns	20 µA @ 200 V	175°C	Standard	Active

Engineering Selection Recommendations

Direct Replacement (Active Product Status):

GIB2404HM3/I is the manufacturer-recommended direct replacement for GIB2404HE3_A/I. This part maintains identical electrical specifications including 16A current rating, 200V reverse voltage, 975 mV forward voltage at 8A, and 35 ns reverse recovery time. The GIB2404HM3/I carries Active product status and includes AEC-Q101 automotive qualification, providing enhanced design continuity and long-term availability assurance.

Current-Rated Alternatives (Active Product Status):

STTH3002CG and STTH3002CG-TR are suitable for applications where 15A current capability is acceptable. Both parts maintain 200V reverse voltage rating and feature improved reverse recovery time of 22 ns compared to the original 35 ns specification. These STMicroelectronics devices carry Active product status with extended operating temperature range to 175°C maximum junction temperature.

Reduced-Current Alternatives (Active Product Status):

SBR20A200CTB and SBR20A200CTB-13 are rated for 10A average rectified current and employ Super Barrier technology, delivering 30 ns reverse recovery time and lower forward voltage characteristics. These Diodes Incorporated parts are suitable for applications with maximum 10A current requirements and carry Active product status with AEC-Q101 automotive qualification.

FFB20UP20DN-F085 (onsemi) and MURB1620CTT4G (onsemi) provide 10A and 8A current ratings respectively, both maintaining 200V reverse voltage and fast recovery characteristics. These parts carry Active product status with extended temperature range to 175°C.

SBR10200CTB-13-G is rated for 5A maximum current and represents the lowest current alternative, suitable only for applications with significantly reduced current requirements.

All substitute parts maintain ROHS3 compliance, MSL Level 1 moisture sensitivity rating, and REACH unaffected status consistent with the original part.

Frequently Asked Questions (FAQ)

Q: Can GIB2404HM3/I directly replace GIB2404HE3_A/I without circuit modification?

A: Yes. GIB2404HM3/I is the manufacturer-recommended direct replacement with identical electrical specifications and TO-263-3 D2PAK package. No circuit modifications are required. The primary difference is product status change from Last Time Buy to Active, ensuring continued availability.

Q: What is the minimum current rating acceptable for substitution?

A: The substitute part must be rated for 16A average rectified current or higher to maintain full design margin. Parts rated below 16A (such as 10A, 8A, or 5A variants) are reduced-current alternatives suitable only for applications with confirmed lower current requirements. Using an undersized part in a 16A application creates thermal and reliability risk.

Q: Are Super Barrier technology diodes (SBR series) compatible with Standard technology designs?

A: Super Barrier diodes are electrically compatible with Standard technology designs when voltage and current ratings are met. SBR20A200CTB and SBR20A200CTB-13 offer improved reverse recovery time (30 ns versus 35 ns) and lower forward voltage characteristics. However, these parts are rated for 10A maximum current, not the original 16A specification.

Q: Why do some substitute parts have higher reverse voltage ratings (300V)?

A: STTH2003CGY-TR is rated for 300V reverse voltage, exceeding the original 200V specification. This higher rating provides additional design margin for voltage transients and overvoltage conditions. The part remains compatible for 200V applications and maintains the required fast recovery characteristics and TO-263-3 D2PAK package.

Q: What is the significance of packaging designations (Tape & Reel, Cut Tape, Tube)?

A: Packaging designations indicate supply format only and do not affect electrical compatibility. Tape & Reel (TR) and Cut Tape (CT) formats are suitable for automated assembly processes. Tube packaging is suitable for manual assembly or lower-volume applications. All substitute parts use identical TO-263-3 D2PAK physical package for PCB mounting compatibility.

Q: Do all substitute parts meet automotive qualification requirements?

A: GIB2404HM3/I, SBR20A200CTB, SBR20A200CTB-13, and FFB20UP20DN-F085 carry AEC-Q101 automotive qualification. MURB1620CTT4G, SBR10200CTB-13-G, STTH2003CGY-TR, STTH3002CG, and STTH3002CG-TR do not list AEC-Q101 qualification in the provided specifications. Automotive applications must verify qualification requirements with the specific design.

Q: What is the operating temperature difference between the original part and substitutes?

A: GIB2404HE3_A/I is rated for -65°C to 150°C junction temperature. Most substitute parts extend the maximum junction temperature to 175°C, providing additional thermal margin. STTH2003CGY-TR has a reduced minimum operating temperature of -40°C. Application thermal analysis should confirm compatibility with the selected substitute's temperature range.

Q: Can STTH3002CG-TR be used in place of STTH3002CG?

A: Yes. STTH3002CG-TR and STTH3002CG are electrically identical with identical electrical specifications. The difference is packaging format: STTH3002CG-TR is supplied in Cut Tape format while STTH3002CG is supplied in Tube format. Selection depends on assembly process requirements and supply chain preferences.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message