GF-642-0032 Equivalent & Substitute Parts

Part Overview

The GF-642-0032 is a slide switch with 4PDT (four-pole double-throw) configuration rated for 6A AC at 125V and 500mA DC at 125V. This panel-mount switch is designed for applications requiring multi-circuit switching with reliable contact performance. The part is Active status and widely used in industrial control, instrumentation, and consumer electronics applications. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and access to alternative packaging or inventory options while maintaining identical electrical and mechanical performance.

Substiute Parts

GF-642-0032

CW IndustriesIn Stock: 794GF-642-0032 Datasheet

Current PartRFQ

GF-642-6010

CW IndustriesIn Stock: 1381GF-642-6010 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The GF-642-0032 has one identified substitute part: GF-642-6010. Both parts belong to the CW Industries GF-642 series and share identical electrical and mechanical specifications. Substitution between these parts is valid based on the following critical parameters:

• Circuit configuration: Both are 4PDT
• Current and voltage ratings: Identical (6A AC / 500mA DC at 125V AC/DC)
• Switch function: Both On-On
• Mounting and termination: Both panel mount with PC pin termination
• Physical dimensions: Identical actuator length (8.74mm) and switch travel (4.01mm)
• Contact materials and finish: Both copper with silver finish
• Operating temperature range: Identical (-10°C to 104°C)
• Mechanical and electrical life: Both 10,000 cycles mechanical / 6,000 cycles electrical
• Compliance: Both ROHS3 compliant and REACH unaffected

The primary difference between these parts is packaging: GF-642-0032 is supplied in standard packaging, while GF-642-6010 is supplied in bulk packaging. This distinction does not affect functional or electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both GF-642-0032 and GF-642-6010 are Active status products from CW Industries and maintain full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on packaging requirements and inventory availability:

• GF-642-0032: Select when standard packaging is required or for lower-volume applications
• GF-642-6010: Select when bulk packaging is acceptable and higher inventory quantities are needed

Both parts are electrically and mechanically interchangeable with no functional differences. The choice between them does not impact circuit design, PCB layout, or system performance.

Frequently Asked Questions (FAQ)

Q: Can GF-642-6010 be used as a direct replacement for GF-642-0032?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (standard versus bulk). No circuit modifications or design changes are required.

Q: Are there any differences in electrical performance between these parts?

A: No. Both parts have identical current ratings (6A AC / 500mA DC), voltage ratings (125V AC/DC), circuit configuration (4PDT), and switching characteristics (On-On function).

Q: Do both parts meet the same compliance standards?

A: Yes. Both GF-642-0032 and GF-642-6010 are ROHS3 compliant and REACH unaffected.

Q: What is the difference between standard and bulk packaging?

A: Standard packaging is used for individual or small-quantity orders, while bulk packaging is optimized for high-volume procurement. The electrical and mechanical specifications of the switch itself remain unchanged.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical actuator length (8.74mm), switch travel (4.01mm), and all other mechanical dimensions. They are fully interchangeable in panel-mount applications.

Q: What is the operating temperature range for both parts?

A: Both parts operate reliably from -10°C to 104°C.

Q: How many switching cycles can these parts withstand?

A: Both parts are rated for 10,000 mechanical cycles and 6,000 electrical cycles.