GDS06 Equivalent & Substitute Parts

Part Overview

The GDS06 is a 6-position DIP slide switch manufactured by TE Connectivity ALCOSWITCH Switches, configured as a single-pole single-throw (SPST) switch rated for 25mA at 24VDC. This through-hole mounted component features a slide actuator with flush, recessed positioning and gold-plated copper alloy contacts. The GDS06 is classified as obsolete, necessitating identification of active equivalent parts to maintain design continuity and ensure ongoing component availability for production and field replacement applications.

Substiute Parts

GDS06

TE Connectivity ALCOSWITCH SwitchesIn Stock: 1205GDS06 Datasheet

Current PartRFQ

1825006-9

TE Connectivity ALCOSWITCH SwitchesIn Stock: 7771825006-9 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the GDS06 DIP switch is determined by strict equivalence across all electrical and mechanical parameters. The following criteria establish valid substitution:

Electrical Parameters:

• Circuit configuration must remain SPST
• Current rating must equal or exceed 25mA
• Voltage rating must equal or exceed 24VDC

Mechanical Parameters:

• Number of positions must equal 6
• Actuator type must be slide (standard) with flush, recessed level
• Mounting type must be through hole
• Pitch must equal 0.100" (2.54mm)
• Height above board must equal 0.114" (2.90mm)

Material and Environmental Parameters:

• Contact material must be copper alloy with gold finish
• Operating temperature range must encompass -30°C to 85°C
• Mechanical and electrical life must equal or exceed 1,000 cycles

Parts meeting all these criteria are classified as direct electrical and mechanical equivalents suitable for one-to-one replacement.

Parameter Comparison

Engineering Selection Recommendations

The GDS06 and 1825006-9 are direct electrical and mechanical equivalents. Both components share identical electrical specifications, mechanical dimensions, and functional characteristics across all critical parameters.

Product Status Consideration: The GDS06 is classified as obsolete, while 1825006-9 maintains active product status. For new designs, production builds, and field replacement applications, 1825006-9 is the appropriate selection to ensure ongoing component availability and supply chain continuity.

Compliance Consideration: The GDS06 is RoHS non-compliant, whereas 1825006-9 is ROHS3 compliant. Applications subject to RoHS directives or requiring compliance documentation must utilize 1825006-9. Both components maintain REACH Unaffected status and share identical ECCN and HTSUS classifications.

Packaging Consideration: 1825006-9 is supplied in tube packaging, providing standardized handling and storage compared to the GDS06. This packaging format aligns with modern manufacturing and logistics requirements.

Frequently Asked Questions (FAQ)

Q: Can 1825006-9 replace GDS06 in existing designs?

A: Yes. The 1825006-9 is a direct equivalent to the GDS06 across all electrical and mechanical parameters. Pin configuration, pitch, height above board, and functional characteristics are identical, enabling one-to-one replacement without circuit modification.

Q: What is the primary difference between GDS06 and 1825006-9?

A: The primary differences are product status and regulatory compliance. The GDS06 is obsolete and RoHS non-compliant, while 1825006-9 is active and ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Are there packaging differences between these parts?

A: Yes. The GDS06 packaging specification is not defined in available documentation, while 1825006-9 is supplied in tube packaging. Tube packaging is standard for active production components and provides consistent handling characteristics.

Q: Does the RoHS compliance difference affect electrical performance?

A: No. RoHS compliance relates to material composition and environmental regulations, not electrical performance. Both components deliver identical electrical characteristics at 25mA, 24VDC operation.

Q: Can GDS06 be used in new designs?

A: The GDS06 is classified as obsolete and is not recommended for new designs. Use 1825006-9 for all new applications to ensure long-term component availability and compliance with current regulatory requirements.

Q: What are the critical substitution parameters for this DIP switch?

A: Critical parameters include SPST circuit configuration, 6-position count, 25mA current rating, 24VDC voltage rating, slide actuator type, through-hole mounting, 0.100" pitch, and 0.114" height above board. All these parameters must match for valid substitution.

Q: Is the operating temperature range identical between both parts?

A: Yes. Both GDS06 and 1825006-9 operate across the identical temperature range of -30°C to 85°C with equivalent mechanical and electrical life ratings of 1,000 cycles.