GDA-800MA Ceramic Fuse Equivalent & Substitute Parts

Part Overview

The GDA-800MA is an 800 mA ceramic fuse cartridge rated for 250 V AC/DC operation in a 5mm x 20mm package form factor. Manufactured by Eaton - Electronics Division, this fast-blow fuse cartridge requires a compatible holder for installation and is classified as Active product status. Substitute parts become necessary due to inventory availability, regional supply chain constraints, or specific compliance certifications required for end-application deployment.

Substiute Parts

GDA-800MA

Eaton - Electronics DivisionIn Stock: 1081GDA-800MA Datasheet

Current PartRFQ

BK/GDA-800MA

Eaton - Electronics DivisionIn Stock: 799BK/GDA-800MA Datasheet

Parametric EquivalentRFQ

BK1/S501-800-R

Eaton - Electronics DivisionIn Stock: 1761BK1/S501-800-R Datasheet

Parametric EquivalentRFQ

0001.1003

SCHURTER Inc.In Stock: 13920001.1003 Datasheet

Parametric EquivalentRFQ

0216.800HXP

Littelfuse Inc.In Stock: 14690216.800HXP Datasheet

Parametric EquivalentRFQ

0216.800MXP

Littelfuse Inc.In Stock: 12450216.800MXP Datasheet

Parametric EquivalentRFQ

FCD-800MA

OptiFuseIn Stock: 4177FCD-800MA Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GDA-800MA is determined by strict equivalence across the following parameters:

• Current Rating: 800 mA (exact match required)
• Voltage Rating - AC: 250 V (exact match required)
• Fuse Type: Cartridge, Ceramic (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: 5mm x 20mm (exact match required)
• Breaking Capacity @ Rated Voltage: 1.5 kA (exact match required)
• Mounting Type: Requires Holder (exact match required)

All substitute parts listed below meet these core electrical and mechanical parameters. Secondary parameters such as melting I²t, DC cold resistance, and approval agencies are provided for engineering reference but do not disqualify substitution eligibility when primary parameters align.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and are suitable for direct replacement in applications requiring 800 mA ceramic fuse cartridges rated for 250 V AC operation in 5mm x 20mm form factor.

Eaton - Electronics Division substitutes (BK/GDA-800MA, BK1/S501-800-R) provide continuity with the original manufacturer and carry identical melting I²t and DC cold resistance specifications. BK1/S501-800-R offers expanded approval agency coverage including BSI, cULus, and VDE certifications.

SCHURTER Inc. 0001.1003 operates across -55°C to 125°C temperature range and carries CCC, cURus, KC, and VDE approvals. Melting I²t specification (0.469) differs from the main part.

Littelfuse Inc. substitutes (0216.800HXP, 0216.800MXP) provide identical electrical characteristics with melting I²t of 0.285 and DC cold resistance of 0.295 Ohms. Both operate across -55°C to 125°C and carry CCC, CE, CSA, SEMKO, UL, and VDE certifications.

OptiFuse FCD-800MA offers the lowest melting I²t value (0.121) and carries IEC 60127 approval. This part explicitly specifies 250 V DC voltage rating in addition to 250 V AC.

Selection should prioritize compliance certifications required by the end application and regional regulatory frameworks.

Frequently Asked Questions (FAQ)

Q: Can BK/GDA-800MA be used as a direct replacement for GDA-800MA?

A: Yes. Both parts are manufactured by Eaton - Electronics Division and share identical electrical specifications: 800 mA current rating, 250 V AC voltage rating, 1.5 kA breaking capacity, 0.097 melting I²t, and 0.245 Ohms DC cold resistance. Both are packaged in 5mm x 20mm ceramic cartridge form factor requiring a compatible holder.

Q: What is the difference between 0216.800HXP and 0216.800MXP?

A: Both Littelfuse parts carry identical electrical specifications: 800 mA, 250 V AC, 1.5 kA breaking capacity, 0.285 melting I²t, and 0.295 Ohms DC cold resistance. Both operate across -55°C to 125°C and carry the same approval agencies (CCC, CE, CSA, SEMKO, UL, VDE). The parts are functionally equivalent for substitution purposes.

Q: Does FCD-800MA from OptiFuse differ from Eaton GDA-800MA?

A: FCD-800MA meets all core substitution parameters: 800 mA, 250 V AC, 1.5 kA breaking capacity, and 5mm x 20mm package. Differences exist in secondary specifications: melting I²t (0.121 versus 0.097) and explicit 250 V DC rating. FCD-800MA carries IEC 60127 approval rather than the multi-agency certifications of GDA-800MA.

Q: Are temperature operating ranges critical for substitution?

A: Temperature operating range is provided for reference but does not disqualify substitution when primary electrical and mechanical parameters align. GDA-800MA and BK/GDA-800MA do not specify operating temperature. SCHURTER 0001.1003, Littelfuse 0216.800HXP, and 0216.800MXP specify -55°C to 125°C operation. Application requirements determine whether expanded temperature range is necessary.

Q: What approval agencies are most relevant for industrial applications?

A: All substitute parts carry CCC certification. For North American applications, UL or cULus certification is relevant (present in BK/GDA-800MA, BK1/S501-800-R, 0216.800HXP, 0216.800MXP). For European applications, VDE and CE certifications are relevant (present in 0001.1003, 0216.800HXP, 0216.800MXP). Verify specific regulatory requirements for your application region.

Q: Can these fuses be used without a holder?

A: No. All parts listed, including GDA-800MA, are classified as Cartridge type requiring a compatible holder for installation. The 5mm x 20mm form factor specifies the holder dimensions required.