GBU6JL-7001M3/45 Equivalent & Substitute Parts

Part Overview

The GBU6JL-7001M3/45 is a single-phase bridge rectifier manufactured by Vishay General Semiconductor - Diodes Division, rated for 600 V peak reverse voltage and 3.8 A average rectified current. This component is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system maintenance and new design implementations. The through-hole GBU package configuration supports standard PCB assembly processes.

Substiute Parts

GBU6JL-7001M3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1120GBU6JL-7001M3/45 Datasheet

Current PartRFQ

GBU6J-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1787GBU6J-E3/45 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the GBU6JL-7001M3/45 is determined by strict equivalence across the following critical parameters:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 3.8 A
• Voltage - Forward (Vf) (Max) @ If: 1 V @ 6 A
• Current - Reverse Leakage @ Vr: 5 µA @ 600 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, GBU

The GBU6J-E3/45 meets all specified electrical and mechanical parameters, establishing it as a parametric equivalent. Differences in product status (active vs. obsolete) and packaging format (tube vs. standard) do not affect functional interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The GBU6J-E3/45 is the direct parametric equivalent for the obsolete GBU6JL-7001M3/45. Both components are manufactured by Vishay General Semiconductor - Diodes Division and maintain identical electrical specifications and thermal operating ranges. The GBU6J-E3/45 carries active product status, ensuring continued availability and supply chain reliability. Both parts comply with ROHS3 standards and carry MSL rating 1 (unlimited moisture sensitivity), supporting long-term storage without degradation. Selection of the GBU6J-E3/45 eliminates obsolescence risk while maintaining full functional compatibility in single-phase bridge rectifier applications rated for 600 V and 3.8 A operation.

Frequently Asked Questions (FAQ)

Q: Can the GBU6J-E3/45 be used as a direct replacement for the GBU6JL-7001M3/45?

A: Yes. Both components share identical electrical ratings (600 V peak reverse voltage, 3.8 A average rectified current, 1 V forward voltage at 6 A, 5 µA reverse leakage at 600 V), operating temperature range (-55°C to 150°C), and through-hole GBU package configuration. No circuit modifications are required.

Q: What is the primary difference between these two part numbers?

A: The GBU6JL-7001M3/45 is classified as obsolete, while the GBU6J-E3/45 maintains active product status. The GBU6J-E3/45 is supplied in tube packaging, whereas the main part uses standard packaging. These differences do not affect electrical performance or PCB mounting compatibility.

Q: Are both parts ROHS3 compliant?

A: Yes. Both the GBU6JL-7001M3/45 and GBU6J-E3/45 are ROHS3 compliant and carry MSL rating 1 (unlimited), meeting environmental and storage requirements for industrial and commercial applications.

Q: Does the through-hole GBU package remain consistent between these parts?

A: Yes. Both components use the 4-SIP, GBU package configuration, ensuring identical PCB footprint and mounting hole alignment. No layout modifications are necessary when substituting between these parts.

Q: Why should the GBU6J-E3/45 be selected over the obsolete GBU6JL-7001M3/45?

A: The active product status of the GBU6J-E3/45 guarantees ongoing manufacturer support, documented availability, and supply chain continuity. Obsolete components present procurement risk and may lack current technical documentation or quality assurance records.