G8P-1AP DC9 Equivalent & Substitute Parts

Part Overview

The G8P-1AP DC9 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div, configured as a SPST-NO (1 Form A) with a 9VDC coil and 30A contact rating. This through-hole mounted relay is designed for PCB applications requiring reliable switching of AC and DC loads.

The G8P-1AP DC9 is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support legacy system maintenance and repairs.

Substiute Parts

G8P-1AP DC9

Omron Electronics Inc-EMC DivIn Stock: 763G8P-1AP DC9 Datasheet

Current PartRFQ

G8P-1AP-DC9

Omron Electronics Inc-EMC DivIn Stock: 1188G8P-1AP-DC9 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the G8P-1AP DC9 is determined by strict equivalence across the following critical parameters:

• Coil voltage: 9VDC
• Contact configuration: SPST-NO (1 Form A)
• Contact current rating: 30 A
• Switching voltage capability: 250VAC, 28VDC - Max
• Mounting type: Through Hole
• Coil current draw: 93 mA
• Coil resistance: 97 Ohms
• Operating temperature range: -55°C ~ 105°C
• Contact material: Silver Cadmium Oxide (AgCdO)
• Termination style: PC Pin

The substitute part G8P-1AP-DC9 meets all these parameters and belongs to the same G8P series base product family.

Parameter Comparison

Engineering Selection Recommendations

The G8P-1AP-DC9 is the direct substitute for the obsolete G8P-1AP DC9. Both parts are manufactured by Omron Electronics Inc-EMC Div and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction is product status: G8P-1AP DC9 is obsolete, while G8P-1AP-DC9 is active and currently available. The substitute part maintains full compatibility with existing PCB designs and circuit requirements.

Both parts carry ECCN classification EAR99 and HTSUS code 8536.41.0050. The substitute part is available in bulk packaging with confirmed inventory stock.

Frequently Asked Questions (FAQ)

Q: Can G8P-1AP-DC9 directly replace G8P-1AP DC9 in existing designs?

A: Yes. Both parts are electrically and mechanically identical across all specified parameters, including coil voltage, contact configuration, current rating, switching voltage, mounting type, and termination style. No circuit modifications are required.

Q: What is the difference between G8P-1AP DC9 and G8P-1AP-DC9?

A: The parts are functionally equivalent. The primary difference is product status: G8P-1AP DC9 is obsolete, while G8P-1AP-DC9 is active. Both are manufactured by Omron and share identical specifications.

Q: Are there packaging differences between these parts?

A: G8P-1AP DC9 is listed with unspecified packaging, while G8P-1AP-DC9 is supplied in bulk packaging. Both use PC pin termination for through-hole PCB mounting.

Q: What parameters must match for relay substitution?

A: Critical parameters include coil voltage (9VDC), contact form (SPST-NO), current rating (30A), switching voltage (250VAC, 28VDC max), mounting type (through hole), coil current (93mA), operating temperature range (-55°C to 105°C), and termination style (PC pin).

Q: Is the substitute part RoHS compliant?

A: G8P-1AP-DC9 is RoHS non-compliant. Compliance requirements should be verified against your application and regional regulations.