G7EB-1AP1 DC24 Equivalent & Substitute Parts

Part Overview

The G7EB-1AP1 DC24 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div, designed for SPST-NO (1 Form A) switching applications at 24VDC. This through-hole mounted relay is rated for 100A contact current with a maximum switching voltage of 800VAC. The part is currently active in production with 932 units in stock. Alternative models may be required due to inventory constraints, application-specific packaging needs, or supply chain considerations.

Substiute Parts

G7EB-1AP1 DC24

Omron Electronics Inc-EMC DivIn Stock: 1010G7EB-1AP1 DC24 Datasheet

Current PartRFQ

G7EB-1A DC24

Omron Electronics Inc-EMC DivIn Stock: 1451G7EB-1A DC24 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the G7EB-1AP1 DC24 is determined by strict equivalence across the following critical parameters:

• Coil voltage specification (24VDC)
• Contact form configuration (SPST-NO / 1 Form A)
• Contact current rating (100A minimum)
• Maximum switching voltage (800VAC)
• Mounting type (Through Hole)
• Termination style (PC Pin)
• Operating temperature range (-40°C ~ 85°C)
• Compliance certifications (RoHS Compliant, REACH Affected)

The G7EB-1A DC24 meets all substitution criteria as a parametric equivalent within the G7EB series.

Parameter Comparison

Engineering Selection Recommendations

Both the G7EB-1AP1 DC24 and G7EB-1A DC24 are active production parts with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Inventory availability: G7EB-1A DC24 has higher stock levels (1350 units vs. 932 units)
• Supply chain lead times and procurement timelines
• Compliance requirements: Both parts maintain RoHS Compliant and REACH Affected status
• Application-specific packaging or documentation requirements

No technical performance differences exist between these parts for standard 24VDC SPST-NO relay applications.

Frequently Asked Questions (FAQ)

Q: Can G7EB-1A DC24 be used as a direct replacement for G7EB-1AP1 DC24?

A: Yes. Both parts are parametric equivalents with identical coil voltage, contact form, current rating, switching voltage, mounting type, and termination style. No circuit modifications are required.

Q: Are there any differences in contact material or reliability between these parts?

A: No. Both parts use silver alloy, cadmium-free contact material and operate across the same temperature range (-40°C ~ 85°C).

Q: What is the significance of the part number suffix difference (AP1 vs. A)?

A: The suffix indicates packaging or internal configuration variants within the G7EB series. Both variants meet identical electrical specifications for 24VDC SPST-NO relay applications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both G7EB-1AP1 DC24 and G7EB-1A DC24 are RoHS Compliant, REACH Affected, with MSL rating of 1 (Unlimited).

Q: What coil current should be expected during operation?

A: Both parts draw 116.5 mA coil current at 24VDC nominal, with a coil resistance of 206 Ohms.