G700P06LL MOSFET Equivalent & Substitute Parts

Part Overview

The G700P06LL is a P-Channel MOSFET manufactured by Goford Semiconductor, designed for surface mount applications in the SOT-23-6L package. This device operates at drain-source voltages up to 60V with continuous drain current capability of 5A at 25°C and maximum power dissipation of 3.1W. The part is classified as Active product status and is part of the TrenchFET® series. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring P-Channel MOSFET functionality within the specified electrical and mechanical parameters.

Substiute Parts

G700P06LL

Goford SemiconductorIn Stock: 3988G700P06LL Datasheet

Current PartRFQ

G700P06LL

Goford SemiconductorIn Stock: 13020G700P06LL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the G700P06LL is determined by equivalence across the following critical electrical and mechanical parameters:

Electrical Equivalence Criteria:

• FET Type: P-Channel configuration
• Drain to Source Voltage (Vdss): 60V rating
• Continuous Drain Current (Id) @ 25°C: 5A (Tc)
• On-State Resistance (Rds On): 75 mOhm maximum @ 3.2A, 10V gate-source voltage
• Power Dissipation (Max): 3.1W (Tc)
• Gate-Source Voltage (Vgs) Range: ±20V maximum
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Equivalence Criteria:

• Package Type: SOT-23-6L (Surface Mount)
• Mounting Type: Surface Mount
• Series Classification: TrenchFET®

Parts meeting all electrical and mechanical parameters listed above are classified as parametric equivalents and direct substitutes for the G700P06LL.

Parameter Comparison

Engineering Selection Recommendations

The G700P06LL (substitute) is electrically and mechanically equivalent to the main G700P06LL part across all critical parameters including drain-source voltage, continuous drain current, on-state resistance, power dissipation, and operating temperature range. Both parts are classified as Active product status and utilize identical SOT-23-6L surface mount packaging.

Compliance Consideration:

The primary distinction between the main part and substitute is RoHS compliance status. The main G700P06LL is ROHS3 Compliant, while the substitute G700P06LL is RoHS non-compliant. Applications subject to RoHS3 regulatory requirements must use the main part (ROHS3 Compliant version). Applications without RoHS3 mandates may utilize either version based on supply chain availability and inventory requirements.

Both parts carry identical ECCN (EAR99) and HTSUS (8541.29.0000) classifications, indicating equivalent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can the substitute G700P06LL be used in place of the main G700P06LL in all applications?

A: The substitute G700P06LL is electrically and mechanically equivalent across all specified parameters. However, applications subject to RoHS3 compliance requirements must use the main part (ROHS3 Compliant version). For applications without RoHS3 mandates, the substitute is functionally interchangeable.

Q: What are the key electrical parameters that define substitution for this P-Channel MOSFET?

A: Substitution is determined by equivalence in FET type (P-Channel), drain-source voltage (60V), continuous drain current (5A @ 25°C), on-state resistance (75 mOhm @ 3.2A, 10V), power dissipation (3.1W), gate-source voltage range (±20V), and operating temperature range (-55°C to 150°C).

Q: Are the package dimensions identical between the main part and substitute?

A: Both parts use the SOT-23-6L surface mount package with identical mechanical specifications. No package or pinout differences exist between the two versions.

Q: What is the difference in RoHS compliance between these parts?

A: The main G700P06LL is ROHS3 Compliant, meeting RoHS3 regulatory requirements. The substitute G700P06LL is RoHS non-compliant. Selection depends on regulatory requirements for the end application.

Q: Are there differences in moisture sensitivity or storage requirements?

A: The substitute part specifies Moisture Sensitivity Level (MSL) 3 (168 Hours). The main part does not specify MSL in the provided parameters. Consult detailed datasheets for specific moisture handling and storage protocols.

Q: Can these parts be used interchangeably in PCB designs?

A: Yes. Both parts are identical in pinout, package footprint (SOT-23-6L), and electrical performance. No PCB design modifications are required when substituting between these parts, subject to compliance requirements noted above.