G6K-2F-Y DC9 Equivalent & Substitute Parts

Part Overview

The G6K-2F-Y DC9 is an Omron Electronics telecom relay with DPDT (2 Form C) contact configuration, rated for 1A at 9VDC coil voltage. This surface mount relay is designed for telecom applications requiring sealed, fully protected switching contacts. The part is currently active in production with 1128 pieces in stock. Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement in circuit designs without functional degradation.

Substiute Parts

G6K-2F-Y DC9

Omron Electronics Inc-EMC DivIn Stock: 1161G6K-2F-Y DC9 Datasheet

Current PartRFQ

G6K-2F DC9

Omron Electronics Inc-EMC DivIn Stock: 1360G6K-2F DC9 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the G6K-2F-Y DC9 is determined by strict equivalence across the following critical parameters:

• Coil voltage: 9VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 1 A
• Switching voltage: 125VAC, 60VDC - Max
• Coil current: 11.3 mA
• Coil type: Non Latching
• Mounting type: Surface Mount
• Termination style: Gull Wing
• Seal rating: Sealed - Fully
• Operating temperature range: -40°C ~ 70°C
• Contact material: Silver (Ag), Gold (Au)
• Coil resistance: 795 Ohms
• Must operate voltage: 7.2 VDC
• Must release voltage: 0.9 VDC
• Operate time: 3 ms
• Release time: 3 ms
• Relay type: Telecom

The G6K-2F DC9 meets all specified parameters and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the G6K-2F-Y DC9 and G6K-2F DC9 are active production parts from Omron Electronics with identical electrical and mechanical specifications. The G6K-2F DC9 carries ROHS3 compliance certification, providing enhanced regulatory alignment for applications subject to stricter environmental standards. Both parts maintain equivalent performance characteristics across all switching, timing, and thermal parameters. Selection between these parts depends on specific compliance requirements and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can G6K-2F DC9 replace G6K-2F-Y DC9 in existing designs?

A: Yes. Both parts are parametrically equivalent across all critical electrical and mechanical parameters including coil voltage, contact configuration, current rating, switching voltage, timing characteristics, and operating temperature range. Direct substitution is supported without circuit modification.

Q: What is the difference between these two part numbers?

A: The primary difference is the RoHS certification level. G6K-2F-Y DC9 carries RoHS Compliant status, while G6K-2F DC9 carries ROHS3 Compliant status. All functional and electrical parameters are identical.

Q: Are the surface mount terminations identical?

A: Yes. Both parts use Gull Wing termination style for surface mount assembly. PCB footprint and reflow soldering parameters remain consistent between the two parts.

Q: Do these relays have the same moisture sensitivity rating?

A: Yes. Both parts are rated MSL 3 (168 Hours), indicating identical moisture handling requirements during storage and assembly.

Q: What is the operating voltage window for these relays?

A: The must operate voltage is 7.2 VDC and the must release voltage is 0.9 VDC. Both parts maintain these specifications, ensuring consistent switching behavior across the specified coil voltage range.