Omron G5LE-1-ASI-VDDC24 General Purpose Relay: Equivalent & Substitute Parts

Part Overview

The Omron G5LE-1-ASI-VDDC24 is an active general purpose relay with SPDT (1 Form C) contact configuration, rated for 10A at 24VDC coil voltage. This through-hole mounted relay is designed for industrial control applications requiring sealed flux protection and Class B coil insulation. Alternative part numbers within the G5LE series provide equivalent electrical and mechanical performance for applications where packaging or inventory considerations necessitate component substitution.

Substiute Parts

G5LE-1-ASI-VDDC24

Omron Electronics Inc-EMC DivIn Stock: 843G5LE-1-ASI-VDDC24 Datasheet

Current PartRFQ

G5LE-1 DC24

Omron Electronics Inc-EMC DivIn Stock: 66938G5LE-1 DC24 Datasheet

Parametric EquivalentRFQ

G5LE-1-VDDC24

Omron Electronics Inc-EMC DivIn Stock: 2745G5LE-1-VDDC24 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the Omron G5LE series is determined by electrical equivalence across all critical parameters. The G5LE-1 DC24 and G5LE-1-VDDC24 are parametric equivalents to the G5LE-1-ASI-VDDC24, sharing identical specifications for coil voltage, contact configuration, current rating, switching voltage, coil current, operating temperature range, contact material, coil resistance, and timing characteristics. All three parts maintain the same through-hole mounting, PC pin termination, sealed flux protection, and Class B coil insulation.

The primary distinction between these equivalent parts is packaging format. The G5LE-1-ASI-VDDC24 is supplied in individual packaging, while G5LE-1 DC24 and G5LE-1-VDDC24 are supplied in tray packaging. This packaging difference does not affect electrical or mechanical performance and permits direct substitution in applications where component procurement or inventory management requires alternative packaging configurations.

Parameter Comparison

Engineering Selection Recommendations

All three part numbers are active products from Omron Electronics Inc-EMC Div and maintain full electrical and mechanical equivalence. Selection between G5LE-1-ASI-VDDC24, G5LE-1 DC24, and G5LE-1-VDDC24 should be based on packaging requirements and compliance certifications applicable to the end application.

The G5LE-1 DC24 and G5LE-1-VDDC24 carry ROHS3 compliance certification, while the G5LE-1-ASI-VDDC24 carries RoHS compliance certification. Both certifications satisfy RoHS directive requirements. G5LE-1 DC24 and G5LE-1-VDDC24 additionally carry REACH Unaffected status. For applications requiring tray packaging and maximum regulatory documentation, G5LE-1 DC24 or G5LE-1-VDDC24 are appropriate selections. For applications requiring individual packaging, G5LE-1-ASI-VDDC24 is the specified part number.

Frequently Asked Questions (FAQ)

Q: Can G5LE-1 DC24 or G5LE-1-VDDC24 be used as direct replacements for G5LE-1-ASI-VDDC24 in existing designs?

A: Yes. All three part numbers are parametric equivalents with identical electrical specifications, contact ratings, coil voltage, switching voltage, timing characteristics, and operating temperature range. The only difference is packaging format. Direct substitution is electrically and mechanically valid.

Q: What is the difference between individual packaging and tray packaging?

A: Individual packaging (G5LE-1-ASI-VDDC24) supplies single units in protective packaging suitable for small-quantity orders or component kits. Tray packaging (G5LE-1 DC24, G5LE-1-VDDC24) supplies multiple units in organized trays, optimized for high-volume manufacturing and automated assembly processes. Electrical performance is identical.

Q: Are there compliance differences between these part numbers?

A: The G5LE-1-ASI-VDDC24 carries RoHS compliance. The G5LE-1 DC24 and G5LE-1-VDDC24 carry ROHS3 compliance and REACH Unaffected status. Both RoHS and ROHS3 satisfy RoHS directive requirements. Selection should align with specific regulatory requirements of the end application.

Q: What parameters must remain constant for substitution within the G5LE series?

A: Coil voltage (24VDC), contact form (SPDT), current rating (10A), switching voltage (250VAC/125VDC), coil current (16.7 mA), operating temperature range (-25°C to 85°C), and timing characteristics (10 ms operate, 5 ms release) must remain constant. Any deviation in these parameters requires re-evaluation of circuit compatibility.

Q: Can these relays be used interchangeably in PCB designs?

A: Yes, provided the PCB footprint accommodates through-hole PC pin termination. All three part numbers use identical through-hole mounting and PC pin termination. Verify PCB hole spacing and pin configuration match the G5LE series standard before assembly.