G5LE-1A4-ASI DC24 Equivalent & Substitute Parts

Part Overview

The G5LE-1A4-ASI DC24 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div. This SPST-NO (1 Form A) relay operates on a 24VDC coil and is rated for 10A switching capacity at 250VAC or 125VDC maximum. The component features through-hole mounting with PC pin termination and is fully sealed. This relay is currently in active product status with 881 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters match the original specification, enabling direct replacement in circuit applications without design modification.

Substiute Parts

G5LE-1A4-ASI DC24

Omron Electronics Inc-EMC DivIn Stock: 939G5LE-1A4-ASI DC24 Datasheet

Current PartRFQ

G5LE-1A4 DC24

Omron Electronics Inc-EMC DivIn Stock: 1166G5LE-1A4 DC24 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the G5LE-1A4-ASI DC24 are identified based on matching the following critical parameters:

• Coil voltage: 24VDC
• Contact form: SPST-NO (1 Form A)
• Contact rating: 10 A
• Switching voltage: 250VAC, 125VDC - Max
• Mounting type: Through Hole
• Termination style: PC Pin
• Operating temperature range: -25°C ~ 85°C
• Coil current: 16.7 mA
• Coil resistance: 1.44 kOhms
• Contact material: Silver Tin Oxide (AgSnO)
• Seal rating: Sealed - Fully
• Coil insulation: Class B
• Must operate voltage: 18 VDC
• Must release voltage: 2.4 VDC
• Operate time: 10 ms
• Release time: 5 ms

Parts matching all these parameters are classified as parametric equivalents and may be used as direct substitutes in applications requiring the G5LE-1A4-ASI DC24.

Parameter Comparison

Engineering Selection Recommendations

Both the G5LE-1A4-ASI DC24 and G5LE-1A4 DC24 are active products from Omron Electronics Inc-EMC Div with identical electrical and mechanical specifications. The G5LE-1A4 DC24 carries ROHS3 compliance certification, while the G5LE-1A4-ASI DC24 is RoHS Compliant. Both parts are fully sealed, rated for the same operating temperature range, and feature equivalent coil and contact characteristics. Selection between these parts may be based on compliance requirements, inventory availability, or specific procurement specifications. The G5LE-1A4 DC24 currently has higher inventory availability at 1151 units compared to 881 units for the G5LE-1A4-ASI DC24.

Frequently Asked Questions (FAQ)

Q: Can the G5LE-1A4 DC24 be used as a direct replacement for the G5LE-1A4-ASI DC24?

A: Yes. Both parts share identical electrical and mechanical parameters including coil voltage, contact form, current rating, switching voltage, mounting type, termination style, and operating characteristics. They are parametric equivalents suitable for direct substitution in circuit applications.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by matching coil voltage (24VDC), contact form (SPST-NO), current rating (10A), switching voltage (250VAC/125VDC max), mounting type (through hole), termination style (PC pin), operating temperature range (-25°C to 85°C), and timing characteristics (10ms operate, 5ms release).

Q: Are there differences in compliance certifications between these parts?

A: The G5LE-1A4-ASI DC24 is RoHS Compliant, while the G5LE-1A4 DC24 is ROHS3 Compliant. Both meet environmental compliance standards. Selection should be based on specific project compliance requirements.

Q: How do the coil specifications compare?

A: Both parts have identical coil specifications: 24VDC coil voltage, 16.7mA coil current, 1.44kOhms coil resistance, Class B insulation, and non-latching coil type. Must operate voltage is 18VDC and must release voltage is 2.4VDC for both parts.

Q: What is the contact material used in these relays?

A: Both relays use Silver Tin Oxide (AgSnO) contact material, providing consistent switching performance and reliability across equivalent parts.

Q: Are there packaging or inventory considerations?

A: Both parts are supplied in trays. The G5LE-1A4 DC24 has higher current inventory availability at 1151 units compared to 881 units for the G5LE-1A4-ASI DC24. Procurement decisions may factor inventory status based on project timelines.