Omron G5LE-14-ASI DC6 General Purpose Relay: Equivalent & Substitute Parts

Part Overview

The Omron G5LE-14-ASI DC6 is a general purpose relay with SPDT (1 Form C) contact configuration, rated for 10A at 6VDC coil voltage. This through-hole mounted relay is designed for applications requiring reliable switching of AC and DC loads with a sealed, fully enclosed construction. The part is currently active in production with 861 units in stock. Substitute parts are identified when identical electrical and mechanical parameters are maintained across packaging and inventory variations.

Substiute Parts

G5LE-14-ASI DC6

Omron Electronics Inc-EMC DivIn Stock: 926G5LE-14-ASI DC6 Datasheet

Current PartRFQ

G5LE-14-DC6

Omron Electronics Inc-EMC DivIn Stock: 13455G5LE-14-DC6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the G5LE-14-ASI DC6 is determined by strict equivalence across the following critical parameters:

• Coil voltage specification (6VDC)
• Contact configuration (SPDT / 1 Form C)
• Current rating (10A)
• Switching voltage capability (250VAC, 125VDC - Max)
• Coil current draw (66.7 mA)
• Mounting method (Through Hole)
• Termination style (PC Pin)
• Seal rating (Sealed - Fully)
• Operating temperature range (-25°C ~ 85°C)
• Contact material (Silver Tin Oxide)
• Coil resistance (90 Ohms)

Variations in packaging format and inventory availability do not affect functional substitutability when all electrical and mechanical parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

Both the G5LE-14-ASI DC6 and G5LE-14-DC6 are active production parts from Omron Electronics Inc-EMC Div with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Packaging requirements: The G5LE-14-ASI DC6 is supplied individually, while the G5LE-14-DC6 is supplied in tray format for higher-volume applications.
• Inventory availability: The G5LE-14-DC6 offers significantly higher stock levels (13420 units versus 861 units).
• Regulatory compliance: The G5LE-14-DC6 carries ROHS3 compliance, while the G5LE-14-ASI DC6 carries RoHS compliance. Both meet applicable environmental standards.

Either part is functionally interchangeable in circuit designs requiring a 6VDC, 10A SPDT general purpose relay with the specified electrical characteristics and operating parameters.

Frequently Asked Questions (FAQ)

Q: Can the G5LE-14-DC6 be used as a direct replacement for the G5LE-14-ASI DC6?

A: Yes. Both parts share identical electrical specifications, contact ratings, coil parameters, and mechanical mounting characteristics. The primary difference is packaging format (tray versus individual) and inventory availability.

Q: What determines whether a relay can substitute for the G5LE-14-ASI DC6?

A: Substitution requires matching all critical parameters: 6VDC coil voltage, SPDT contact configuration, 10A current rating, 250VAC/125VDC switching voltage, 66.7mA coil current, through-hole mounting, PC pin termination, sealed construction, -25°C to 85°C operating range, Silver Tin Oxide contact material, and 90 Ohm coil resistance.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (individual versus tray) is a logistics and handling consideration only. Electrical and mechanical performance remains identical.

Q: Are there compliance differences between the two parts?

A: The G5LE-14-DC6 carries ROHS3 compliance while the G5LE-14-ASI DC6 carries RoHS compliance. Both meet applicable environmental regulations. Application requirements should determine which compliance level is necessary.

Q: What is the coil resistance specification used for?

A: The 90 Ohm coil resistance determines the coil current draw at the specified 6VDC voltage (66.7 mA). This parameter is critical for circuit design and power supply sizing.

Q: What do the Must Operate and Must Release voltages indicate?

A: Must Operate Voltage (4.5 VDC) is the minimum coil voltage required to guarantee relay activation. Must Release Voltage (0.6 VDC) is the maximum coil voltage at which the relay is guaranteed to deactivate. These parameters define the operating margin for the relay in circuit applications.