G5LE-14-AP3 DC48 Equivalent & Substitute Parts

Part Overview

The G5LE-14-AP3 DC48 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div. This SPDT (1 Form C) relay operates at 48VDC with a 10A contact rating and is designed for through-hole mounting applications. The component is currently active in production with 1051 units in stock. Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate packaging or inventory preferences while maintaining identical electrical and mechanical performance.

Substiute Parts

G5LE-14-AP3 DC48

Omron Electronics Inc-EMC DivIn Stock: 1125G5LE-14-AP3 DC48 Datasheet

Current PartRFQ

G5LE-14 DC48

Omron Electronics Inc-EMC DivIn Stock: 7017G5LE-14 DC48 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the G5LE-14-AP3 DC48 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part G5LE-14 DC48 qualifies as a parametric equivalent because it maintains identical specifications across all key parameters: 48VDC coil voltage, SPDT contact form, 10A contact rating, 250VAC/125VDC switching voltage, 8.3mA coil current, through-hole mounting, PC pin termination, fully sealed construction, -25°C to 85°C operating temperature, Silver Tin Oxide contact material, 5.76 kOhms coil resistance, 36VDC must-operate voltage, 4.8VDC must-release voltage, 10ms operate time, and 5ms release time.

The only difference between the main part and substitute is the packaging format: the main part G5LE-14-AP3 DC48 is supplied in individual packaging, while G5LE-14 DC48 is supplied in tray packaging. This packaging difference does not affect electrical performance or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both G5LE-14-AP3 DC48 and G5LE-14 DC48 are active production components from Omron Electronics Inc-EMC Div with full RoHS compliance. Selection between these parts should be based on packaging requirements and inventory availability. The G5LE-14-AP3 DC48 in individual packaging is suitable for applications requiring single-unit handling or mixed component kits. The G5LE-14 DC48 in tray packaging is appropriate for high-volume assembly operations or when bulk component management is preferred. Both parts are electrically and mechanically identical and will perform identically in circuit applications. The G5LE-14 DC48 offers higher inventory availability (6944 units) compared to G5LE-14-AP3 DC48 (1051 units).

Frequently Asked Questions (FAQ)

Q: Can G5LE-14 DC48 be used as a direct replacement for G5LE-14-AP3 DC48?

A: Yes. Both parts are parametric equivalents with identical electrical and mechanical specifications. The only difference is packaging format (individual versus tray). No circuit modifications or design changes are required.

Q: What is the difference between individual packaging and tray packaging?

A: Individual packaging supplies single components in protective wrapping, suitable for small quantities and mixed orders. Tray packaging supplies multiple components in organized trays, optimized for automated assembly and bulk handling. Electrical performance is identical.

Q: Are there any compatibility concerns when substituting between these parts?

A: No. Both parts use identical through-hole PC pin termination, mounting footprint, and electrical characteristics. They are directly interchangeable at the circuit board level.

Q: Do both parts meet the same compliance standards?

A: Yes. Both G5LE-14-AP3 DC48 and G5LE-14 DC48 are RoHS compliant. The G5LE-14 DC48 carries ROHS3 compliance designation, which represents the current RoHS standard revision.

Q: Which part should be selected for new designs?

A: Selection should be based on packaging preference and supply chain requirements. Both parts are active production components suitable for new designs. Tray packaging (G5LE-14 DC48) is typically preferred for production volumes.