Equivalent & Substitute Parts for G5LE-14-AP3 DC18

Part Overview

The G5LE-14-AP3 DC18 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div, featuring a Single Pole Double Throw (SPDT) contact configuration with a 10A contact rating and 18VDC coil voltage. This through-hole mounted relay is designed for applications requiring reliable switching of AC and DC loads with sealed construction and Class B coil insulation. The part is currently active in production with full RoHS compliance. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product series, ensuring functional interchangeability in circuit applications.

Substiute Parts

G5LE-14-AP3 DC18

Omron Electronics Inc-EMC DivIn Stock: 829G5LE-14-AP3 DC18 Datasheet

Current PartRFQ

G5LE-14 DC18

Omron Electronics Inc-EMC DivIn Stock: 1581G5LE-14 DC18 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the G5LE-14-AP3 DC18 are identified based on strict equivalence of the following critical parameters:

• Coil voltage specification (18VDC)
• Contact configuration (SPDT / 1 Form C)
• Contact current rating (10 A)
• Maximum switching voltage capability (250VAC, 125VDC)
• Coil current draw (22.2 mA)
• Coil resistance (811 Ohms)
• Mounting technology (Through Hole)
• Termination method (PC Pin)
• Operating temperature range (-25°C ~ 85°C)
• Contact material composition (Silver Tin Oxide)
• Seal construction (Sealed - Fully)
• Product series (G5LE)

Substitution is valid when all electrical parameters, mechanical mounting characteristics, and environmental ratings remain identical. Packaging variation alone does not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both the G5LE-14-AP3 DC18 and G5LE-14 DC18 are active production parts with full RoHS compliance and identical electrical and mechanical specifications. Selection between these parts is determined by packaging requirements and inventory availability. The G5LE-14-AP3 DC18 is supplied in individual packaging, while the G5LE-14 DC18 is supplied in tray packaging. Both parts meet the same environmental and compliance standards and are functionally equivalent for circuit applications. The choice between them depends solely on procurement quantity, handling requirements, and assembly process compatibility.

Frequently Asked Questions (FAQ)

Q: Can G5LE-14 DC18 be used as a direct replacement for G5LE-14-AP3 DC18?

A: Yes. Both parts are electrically and mechanically identical. They share the same coil voltage (18VDC), contact configuration (SPDT), current rating (10A), and all operational parameters. The only difference is packaging format.

Q: What is the difference between the two part numbers?

A: The G5LE-14-AP3 DC18 is packaged individually, while the G5LE-14 DC18 is supplied in tray packaging. All electrical and mechanical characteristics are identical.

Q: Are there any compatibility concerns when substituting between these parts?

A: No compatibility concerns exist. Both parts use identical PC pin termination, through-hole mounting, and sealed construction. They are suitable for the same PCB layouts and assembly processes.

Q: What parameters must remain constant for substitution to be valid?

A: Coil voltage, contact form, contact current rating, switching voltage capability, coil current, coil resistance, mounting type, termination style, operating temperature range, contact material, and seal rating must all remain identical.

Q: Does packaging affect the relay's performance?

A: No. Packaging format does not affect electrical performance, switching characteristics, or reliability. It affects only handling, storage, and procurement logistics.