G3VM-41LR5 Equivalent & Substitute Parts

Part Overview

The G3VM-41LR5 is a solid-state relay (SSR) manufactured by Omron Electronics Inc-EMC Div, configured as a SPST-NO (1 Form A) switch with 300 mA load capacity and 0–40 V output voltage range. This component is designed for surface mount applications in 4-SMD packaging and supports both AC and DC output switching.

The G3VM-41LR5 is currently discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or repair requirements.

Substiute Parts

G3VM-41LR5

Omron Electronics Inc-EMC DivIn Stock: 874843G3VM-41LR5 Datasheet

Current PartRFQ

G3VM-41LR5(TR05)

Omron Electronics Inc-EMC DivIn Stock: 4489G3VM-41LR5(TR05) Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the G3VM-41LR5 is determined by the following critical parameters:

• Circuit Configuration: SPST-NO (1 Form A) topology
• Output Voltage Range: 0 V ~ 40 V
• Load Current Capacity: 300 mA
• Input Voltage: 1.15 VDC
• On-State Resistance: Maximum 1.5 Ohms
• Package / Case: 4-SMD (0.165", 4.20mm)
• Mounting Type: Surface Mount
• Output Type: AC, DC capability

Parts meeting all these electrical and mechanical specifications are classified as direct substitutes. Packaging format variations (bulk versus tape & reel) do not affect functional equivalence but may impact procurement and assembly workflows.

Parameter Comparison

Engineering Selection Recommendations

The G3VM-41LR5(TR05) is a direct functional equivalent to the G3VM-41LR5. Both parts share identical electrical specifications, mechanical dimensions, and pin configurations. The primary distinction is product status and packaging format.

G3VM-41LR5(TR05) is the recommended selection for new designs and ongoing production due to its active product status. This variant is supplied in Tape & Reel (TR) format, which is standard for automated assembly processes. The ROHS3 compliance designation provides enhanced regulatory alignment compared to the RoHS Compliant status of the original part.

For applications requiring bulk packaging or legacy inventory management, the original G3VM-41LR5 remains functionally equivalent where existing stock is available, though procurement may be limited due to discontinued status.

Frequently Asked Questions (FAQ)

Q: Can G3VM-41LR5(TR05) be used as a direct replacement for G3VM-41LR5?

A: Yes. Both parts are electrically and mechanically identical. They share the same circuit configuration (SPST-NO), load current rating (300 mA), voltage range (0–40 V), on-state resistance (1.5 Ohms maximum), and 4-SMD package dimensions. The primary difference is packaging format (Tape & Reel versus bulk) and product status.

Q: What does the "(TR05)" designation indicate?

A: The "(TR05)" suffix identifies the packaging format as Tape & Reel. This is a standard supply method for surface mount components in automated manufacturing environments. The electrical and functional specifications remain unchanged.

Q: Are there any compliance differences between the two parts?

A: Both parts meet RoHS requirements. The G3VM-41LR5(TR05) carries ROHS3 Compliant status, while the original G3VM-41LR5 is RoHS Compliant. Both are EAR99 classified and share the same HTSUS code (8536.41.0030). The G3VM-41LR5(TR05) also carries REACH Unaffected status.

Q: Does packaging format affect PCB assembly compatibility?

A: No. Both parts use identical 4-SMD (0.165", 4.20mm) packaging and 4-SSOP supplier device packages. Tape & Reel format is optimized for pick-and-place assembly equipment, while bulk format may require manual handling or alternative feeder systems. Functional performance and board-level compatibility are unaffected.

Q: What is the Moisture Sensitivity Level (MSL) requirement?

A: Both parts carry MSL 3 (168 Hours) rating. This indicates the component must be stored in controlled humidity conditions and has a 168-hour floor life after exposure to ambient conditions. Standard moisture barrier packaging and handling procedures apply.

Q: Why is the original G3VM-41LR5 discontinued?

A: Product discontinuation is typically driven by manufacturer lifecycle decisions, market demand, or transition to newer product variants. The G3VM-41LR5(TR05) remains in active production and serves as the current equivalent offering from Omron Electronics Inc-EMC Div.