G2RL-1A-CF DC5 Equivalent & Substitute Parts

Part Overview

The G2RL-1A-CF DC5 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div, designed for SPST-NO (1 Form A) switching applications at 5VDC coil voltage. This through-hole mounted relay is rated for 12A contact current and supports switching voltages up to 440VAC or 300VDC maximum. The component is currently active in production with RoHS compliance certification and sealed flux protection for enhanced reliability in industrial and commercial applications.

Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain performance consistency across production batches and procurement cycles.

Substiute Parts

G2RL-1A-CF DC5

Omron Electronics Inc-EMC DivIn Stock: 1096G2RL-1A-CF DC5 Datasheet

Current PartRFQ

G2RL1ADC5BYOMB

Omron Electronics Inc-EMC DivIn Stock: 6680G2RL1ADC5BYOMB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the G2RL-1A-CF DC5 is determined by strict equivalence across the following critical parameters:

• Coil voltage specification (5VDC)
• Contact form configuration (SPST-NO / 1 Form A)
• Contact current rating (12 A minimum)
• Switching voltage capability (440VAC, 300VDC maximum)
• Mounting type (Through Hole)
• Termination style (PC Pin)
• Operating temperature range (-40°C ~ 85°C)
• Coil resistance (62.5 Ohms)

Parts meeting all these criteria are classified as parametric equivalents and may be used interchangeably in circuit designs without modification to PCB layout or electrical schematic.

Parameter Comparison

Engineering Selection Recommendations

Both the G2RL-1A-CF DC5 and G2RL1ADC5BYOMB are active production components from Omron Electronics Inc-EMC Div with full RoHS compliance. The G2RL1ADC5BYOMB carries ROHS3 certification, indicating compliance with the most current RoHS directive requirements. Both parts are sealed with flux protection and manufactured with cadmium-free silver alloy contacts, meeting environmental and reliability standards for industrial applications.

Selection between these parts may be based on supply availability, procurement lead times, or specific compliance documentation requirements for end-use applications. No electrical or mechanical redesign is required when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Can G2RL1ADC5BYOMB be used as a direct replacement for G2RL-1A-CF DC5?

A: Yes. Both parts are parametric equivalents with identical electrical and mechanical specifications, including coil voltage, contact rating, switching voltage, mounting type, and termination style. Direct substitution is possible without PCB or schematic modifications.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: ROHS3 represents compliance with the most recent RoHS directive revision. Both certifications indicate the parts are free from restricted substances. ROHS3 compliance provides assurance of adherence to current regulatory standards.

Q: Are the coil resistance and operating characteristics identical?

A: Yes. Both parts have 62.5 Ohms coil resistance, 80 mA coil current, 15 ms operate time, and 5 ms release time. Operating temperature range is -40°C to 85°C for both parts.

Q: What packaging is used for these relays?

A: Both parts are supplied in tube packaging, suitable for automated assembly and manual handling in production environments.

Q: Are there any restrictions on substitution based on application voltage?

A: No. Both parts support identical switching voltages of 440VAC maximum and 300VDC maximum, with the same 12A contact rating. Substitution is unrestricted for applications within these voltage specifications.