G2R-2-H-T130 DC12 Equivalent & Substitute Parts

Part Overview

The G2R-2-H-T130 DC12 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div. This DPDT (2 Form C) relay operates at 12VDC with a 3A contact rating and is designed for through-hole mounting applications. The part is currently active in production with 764 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product series, enabling seamless integration in circuit designs where the main part may be unavailable or when alternative packaging configurations are required.

Substiute Parts

G2R-2-H-T130 DC12

Omron Electronics Inc-EMC DivIn Stock: 836G2R-2-H-T130 DC12 Datasheet

Current PartRFQ

G2R-2-H-DC12

Omron Electronics Inc-EMC DivIn Stock: 779G2R-2-H-DC12 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The G2R-2-H-DC12 is classified as a parametric equivalent to the G2R-2-H-T130 DC12. Substitution eligibility is determined by strict equivalence across the following critical parameters:

• Coil voltage: 12VDC
• Contact configuration: DPDT (2 Form C)
• Current rating: 3 A
• Switching voltage capability: 380VAC, 125VDC - Max
• Coil current draw: 30 mA
• Mounting type: Through Hole
• Termination style: PC Pin
• Operating temperature range: -40°C ~ 70°C
• Coil resistance: 400 Ohms
• Contact material: Silver Alloy
• Seal rating: Sealed - Flux Protection
• Timing specifications: 15 ms operate, 5 ms release

Both parts belong to the G2R series and maintain identical electrical and mechanical characteristics. The primary distinction is packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

Both the G2R-2-H-T130 DC12 and G2R-2-H-DC12 are active products with full compliance certifications. The G2R-2-H-T130 DC12 carries RoHS Compliant status, while the G2R-2-H-DC12 carries ROHS3 Compliant status, indicating enhanced environmental compliance. Both parts share identical electrical specifications and mechanical form factors. Selection between these parts should be based on packaging requirements and compliance certifications applicable to the end application. The G2R-2-H-DC12 in tray packaging may be preferred for high-volume production environments, while the G2R-2-H-T130 DC12 configuration supports standard through-hole assembly workflows.

Frequently Asked Questions (FAQ)

Q: Can G2R-2-H-DC12 be used as a direct replacement for G2R-2-H-T130 DC12?

A: Yes. Both parts maintain identical electrical and mechanical parameters including coil voltage, contact configuration, current rating, switching voltage, operating temperature range, and timing specifications. The primary difference is packaging configuration (tray versus through-hole).

Q: What are the key parameters that determine substitution eligibility?

A: Substitution is valid when the following parameters match: 12VDC coil voltage, DPDT (2 Form C) contact form, 3A contact rating, 380VAC/125VDC switching voltage, 30mA coil current, through-hole mounting, PC pin termination, -40°C to 70°C operating temperature, 400 Ohm coil resistance, silver alloy contacts, sealed flux protection, and specified timing characteristics (15ms operate, 5ms release).

Q: Does packaging affect electrical performance?

A: No. Packaging configuration (tray versus through-hole) does not affect electrical performance or functional characteristics. Both parts deliver identical relay operation and switching performance.

Q: Are there compliance differences between these parts?

A: The G2R-2-H-T130 DC12 is RoHS Compliant, while the G2R-2-H-DC12 is ROHS3 Compliant. Both carry EAR99 ECCN classification and 8536.41.0020 HTSUS code. Compliance selection should align with end-application regulatory requirements.

Q: What is the coil resistance and operating voltage range?

A: Coil resistance is 400 Ohms. Must operate voltage is 8.4 VDC minimum, and must release voltage is 1.8 VDC maximum. Coil current draw is 30 mA at rated 12VDC.