G2R-2-ASI-DC5 Equivalent & Substitute Parts

Part Overview

The G2R-2-ASI-DC5 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div, featuring a DPDT (2 Form C) contact configuration with 5A switching capacity at 5VDC coil voltage. This through-hole mounted relay is designed for applications requiring sealed, flux-protected switching in industrial and commercial environments. The part is currently active in production with 758 units in stock. Substitute parts are identified when identical electrical and mechanical parameters are maintained across different packaging or termination variants within the same product series.

Substiute Parts

G2R-2-ASI-DC5

Omron Electronics Inc-EMC DivIn Stock: 784G2R-2-ASI-DC5 Datasheet

Current PartRFQ

G2R-2-DC5

Omron Electronics Inc-EMC DivIn Stock: 1747G2R-2-DC5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The G2R-2-DC5 qualifies as a parametric equivalent to the G2R-2-ASI-DC5 based on strict electrical and mechanical compatibility. Both parts maintain identical specifications across all critical switching parameters: 5VDC coil voltage, DPDT contact configuration, 5A contact rating, 106 mA coil current, 47 Ohm coil resistance, and -40°C to 70°C operating temperature range. The primary distinction between these parts is packaging format: the G2R-2-ASI-DC5 is supplied in standard packaging, while the G2R-2-DC5 is supplied in tray packaging. Both parts share the same base product number series (G2R-2) and maintain identical PC pin termination for through-hole PCB mounting. Substitution is valid when packaging and inventory logistics permit tray-format components in the application.

Parameter Comparison

Engineering Selection Recommendations

Both the G2R-2-ASI-DC5 and G2R-2-DC5 are active production parts with full RoHS compliance. The G2R-2-DC5 carries ROHS3 certification, representing the most current regulatory compliance standard. Selection between these parts should be based on packaging requirements and supply chain logistics. The G2R-2-DC5 offers higher inventory availability (1720 units versus 758 units) and tray packaging format, which may provide advantages for high-volume assembly operations. The G2R-2-ASI-DC5 maintains standard packaging suitable for lower-volume or mixed-component procurement scenarios. Both parts are classified under ECCN EAR99 and share identical HTSUS commodity codes, indicating equivalent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Are G2R-2-ASI-DC5 and G2R-2-DC5 electrically interchangeable?

A: Yes. Both parts maintain identical electrical specifications including 5VDC coil voltage, 5A contact rating, 106 mA coil current, 47 Ohm coil resistance, and identical switching voltage limits. Coil timing parameters (15 ms operate time, 5 ms release time) and voltage thresholds (4.6 VDC must operate, 0.75 VDC must release) are identical.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. The G2R-2-ASI-DC5 uses standard packaging, while the G2R-2-DC5 is supplied in tray packaging. Both parts are through-hole mounted with PC pin termination and share identical mechanical and electrical characteristics.

Q: Can I use G2R-2-DC5 in place of G2R-2-ASI-DC5 on a PCB?

A: Yes. Both parts have identical through-hole PC pin termination and footprints. Substitution is valid from a mechanical and electrical standpoint. Packaging format does not affect PCB mounting compatibility.

Q: Which part has better regulatory compliance?

A: The G2R-2-DC5 carries ROHS3 certification, representing the latest RoHS standard. The G2R-2-ASI-DC5 is RoHS Compliant. Both parts meet current regulatory requirements and share identical ECCN and HTSUS classifications.

Q: Is there an inventory advantage to choosing one part over the other?

A: The G2R-2-DC5 has significantly higher inventory availability (1720 units in stock) compared to the G2R-2-ASI-DC5 (758 units in stock). This may provide supply chain advantages for larger production runs.