G2R-1-E-ASI-DC24 Equivalent & Substitute Parts

Part Overview

The G2R-1-E-ASI-DC24 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div. This SPDT (1 Form C) relay operates on a 24VDC coil and is rated for 16A switching capacity. The device features through-hole mounting with PC pin termination and sealed flux protection. Currently in active product status with 1026 units in stock, this relay serves applications requiring reliable electromechanical switching in industrial and control systems. Identifying equivalent substitute parts ensures design flexibility, supply chain continuity, and component availability across manufacturing cycles.

Substiute Parts

G2R-1-E-ASI-DC24

Omron Electronics Inc-EMC DivIn Stock: 1128G2R-1-E-ASI-DC24 Datasheet

Current PartRFQ

G2R-1-E-DC24

Omron Electronics Inc-EMC DivIn Stock: 10443G2R-1-E-DC24 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the G2R-1-E-ASI-DC24 are determined by strict equivalence across the following critical parameters:

• Coil voltage specification (24VDC)
• Contact configuration (SPDT / 1 Form C)
• Current rating (16 A)
• Switching voltage capability (380VAC, 125VDC - Max)
• Mounting method (Through Hole)
• Termination type (PC Pin)
• Coil current draw (21.8 mA)
• Operating voltage thresholds (Must Operate: 16.8 VDC, Must Release: 3.6 VDC)
• Response timing (Operate: 15 ms, Release: 5 ms)
• Temperature operating range (-40°C ~ 70°C)
• Contact material composition (Silver Alloy)
• Environmental protection (Sealed - Flux Protection)

The G2R-1-E-DC24 meets all these criteria and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the G2R-1-E-ASI-DC24 and G2R-1-E-DC24 are active products from Omron Electronics Inc-EMC Div with identical electrical and mechanical specifications. The G2R-1-E-DC24 carries ROHS3 compliance certification, representing the most current RoHS standard iteration, while the G2R-1-E-ASI-DC24 maintains RoHS Compliant status. Both parts are classified under ECCN EAR99 and share the same HTSUS code. The G2R-1-E-DC24 offers significantly higher inventory availability at 10404 units compared to 1026 units for the G2R-1-E-ASI-DC24, providing enhanced supply chain reliability for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Can the G2R-1-E-DC24 replace the G2R-1-E-ASI-DC24 in existing designs?

A: Yes. Both parts are parametric equivalents with identical electrical characteristics, contact ratings, coil specifications, timing parameters, and operating ranges. The substitution is direct for applications where the original part was specified.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: ROHS3 represents the third iteration of the Restriction of Hazardous Substances directive, incorporating the most current regulatory requirements. Both certifications confirm the absence of restricted substances; ROHS3 indicates compliance with the latest standard version.

Q: Are the PC pin terminations identical between both parts?

A: Yes. Both parts feature PC pin termination style for through-hole mounting, ensuring mechanical and electrical compatibility in PCB applications.

Q: Does the higher inventory of G2R-1-E-DC24 affect performance characteristics?

A: No. Inventory levels reflect supply availability only and do not impact electrical performance, switching characteristics, or reliability specifications.

Q: Can these relays be used interchangeably in 24VDC control circuits?

A: Yes. Both relays operate on 24VDC coil voltage with identical must-operate and must-release voltage thresholds, making them functionally interchangeable in control circuit applications.

Q: What mounting considerations apply to both parts?

A: Both parts are through-hole mounted devices with PC pin termination. PCB layout and hole spacing must accommodate standard through-hole relay footprints for the G2R series.