G2R-1A-TV8-ASIDC12 Equivalent & Substitute Parts

Part Overview

The G2R-1A-TV8-ASIDC12 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div, configured as a SPST-NO (1 Form A) with a 12VDC coil and 10A contact rating. This through-hole mounted relay is designed for general industrial switching applications with sealed flux protection. The part is currently listed as obsolete, making identification of active equivalent alternatives essential for ongoing procurement and system maintenance.

Substiute Parts

G2R-1A-TV8-ASIDC12

Omron Electronics Inc-EMC DivIn Stock: 1130G2R-1A-TV8-ASIDC12 Datasheet

Current PartRFQ

G2R-1A-AP-DC12

Omron Electronics Inc-EMC DivIn Stock: 1106G2R-1A-AP-DC12 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the G2R-1A-TV8-ASIDC12 is determined by strict equivalence across the following critical parameters:

• Coil voltage: 12VDC
• Contact form: SPST-NO (1 Form A)
• Contact rating: 10 A
• Switching voltage: 380VAC, 125VDC - Max
• Mounting type: Through Hole
• Termination style: PC Pin
• Seal rating: Sealed - Flux Protection
• Operating temperature range: -40°C ~ 70°C
• Contact material: Silver Alloy
• Coil resistance: 275 Ohms
• Coil current: 43.6 mA
• Must operate voltage: 8.4 VDC
• Must release voltage: 1.8 VDC
• Operate time: 15 ms
• Release time: 5 ms

The G2R-1A-AP-DC12 meets all specified electrical and mechanical parameters and is classified as an active product, making it a direct parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

The G2R-1A-AP-DC12 is the direct substitute for the obsolete G2R-1A-TV8-ASIDC12. Both parts are manufactured by Omron Electronics Inc-EMC Div within the G2R series and share identical electrical and mechanical specifications. The primary distinction is product status: the G2R-1A-AP-DC12 is actively manufactured and available, while the G2R-1A-TV8-ASIDC12 is obsolete.

The G2R-1A-AP-DC12 carries RoHS Compliant certification, providing enhanced environmental compliance for applications subject to regulatory requirements. This substitution requires no circuit modifications or design changes, as all functional parameters remain equivalent.

Frequently Asked Questions (FAQ)

Q: Can the G2R-1A-AP-DC12 be used as a direct replacement for the G2R-1A-TV8-ASIDC12?

A: Yes. Both relays are identical in electrical performance and mechanical form factor. All coil voltage, contact rating, switching voltage, timing, and environmental specifications match exactly. The G2R-1A-AP-DC12 is the active equivalent.

Q: What is the difference between these two part numbers?

A: The G2R-1A-TV8-ASIDC12 is obsolete and no longer manufactured. The G2R-1A-AP-DC12 is the current active production equivalent with identical specifications and added RoHS compliance.

Q: Are there any compatibility concerns with PCB mounting?

A: No. Both parts use identical through-hole PC pin termination and are designed for the same PCB footprint. No layout modifications are required.

Q: Does the RoHS compliance of the G2R-1A-AP-DC12 affect circuit operation?

A: No. RoHS compliance is a material composition standard that does not alter electrical or mechanical performance. The relay operates identically to the original part.

Q: What is the coil voltage requirement for these relays?

A: Both relays require 12VDC coil voltage with a must-operate voltage of 8.4 VDC minimum and must-release voltage of 1.8 VDC maximum.

Q: What is the maximum switching capacity?

A: Both relays are rated for 10 A contact current with a maximum switching voltage of 380VAC or 125VDC.