G2R-14-AP3 DC36 Equivalent & Substitute Parts

Part Overview

The G2R-14-AP3 DC36 is a general purpose relay manufactured by Omron Electronics Inc-EMC Div, featuring SPDT (1 Form C) contact configuration with 36VDC coil voltage and 8A contact rating. This through-hole mounted relay is designed for applications requiring reliable switching of AC and DC loads with sealed construction for environmental protection. The part is currently active in production with 1090 units in stock. Substitute parts are identified when identical electrical and mechanical parameters are maintained across different packaging or termination variants within the same product series.

Substiute Parts

G2R-14-AP3 DC36

Omron Electronics Inc-EMC DivIn Stock: 1189G2R-14-AP3 DC36 Datasheet

Current PartRFQ

G2R-14-T130 DC36

Omron Electronics Inc-EMC DivIn Stock: 1034G2R-14-T130 DC36 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The G2R-14-T130 DC36 qualifies as a parametric equivalent to the G2R-14-AP3 DC36 based on strict electrical and mechanical compatibility. Both parts share identical specifications across all critical substitution criteria: coil voltage (36VDC), contact configuration (SPDT), current rating (8A), switching voltage limits (380VAC, 125VDC max), coil current (14.7 mA), operating temperature range (-40°C to 70°C), contact material (silver alloy), and coil resistance (2.45 kOhms). The sole difference between these parts is packaging format: the AP3 variant uses standard packaging while the T130 variant uses tray packaging. Both maintain identical through-hole mounting and PC pin termination. This substitution is valid for applications where packaging format does not impose constraints on assembly or storage procedures.

Parameter Comparison

Engineering Selection Recommendations

Both the G2R-14-AP3 DC36 and G2R-14-T130 DC36 are active production parts with RoHS compliance certification. Selection between these parts should be based on packaging requirements and supply chain considerations. The G2R-14-AP3 DC36 is available with 1090 units in stock, while the G2R-14-T130 DC36 has 933 units in stock. For applications where tray packaging facilitates automated assembly or bulk handling procedures, the T130 variant is suitable. For standard packaging requirements, the AP3 variant is appropriate. Both parts maintain identical electrical performance and thermal operating characteristics across all specified parameters.

Frequently Asked Questions (FAQ)

Q: Can the G2R-14-T130 DC36 be used as a direct replacement for the G2R-14-AP3 DC36 in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (tray versus standard). Direct substitution is valid provided assembly procedures accommodate the packaging variant.

Q: Are there any differences in coil performance between these two part numbers?

A: No. Both parts have identical coil voltage (36VDC), coil current (14.7 mA), coil resistance (2.45 kOhms), and switching characteristics (15 ms operate time, 5 ms release time).

Q: Do both parts support the same contact switching specifications?

A: Yes. Both parts feature SPDT contact configuration with 8A current rating and identical switching voltage limits of 380VAC and 125VDC maximum.

Q: What is the significance of the packaging difference between AP3 and T130 variants?

A: Packaging format affects handling, storage, and assembly procedures. Tray packaging (T130) is typically used for automated assembly environments, while standard packaging (AP3) is used for manual assembly or standard distribution channels. Electrical and mechanical performance is identical.

Q: Are both parts RoHS compliant?

A: Yes. Both the G2R-14-AP3 DC36 and G2R-14-T130 DC36 are RoHS compliant.

Q: What is the operating temperature range for both parts?

A: Both parts operate across the identical temperature range of -40°C to 70°C.