Equivalent & Substitute Parts for G07P04S

Part Overview

The G07P04S is a P-Channel MOSFET manufactured by Goford Semiconductor, designed for surface mount applications in the 8-SOP package. This device operates at 40 V drain-to-source voltage with a continuous drain current rating of 7 A at 25°C and a maximum power dissipation of 2.5 W. The part is classified as Active product status and is RoHS3 compliant. Substitute parts are identified based on matching electrical characteristics, mechanical compatibility, and regulatory compliance to ensure functional equivalence in circuit applications.

Substiute Parts

G07P04S

Goford SemiconductorIn Stock: 4750G07P04S Datasheet

Current PartRFQ

G07P04S

Goford SemiconductorIn Stock: 4750G07P04S Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the G07P04S are identified based on strict parametric equivalence across the following critical electrical and mechanical criteria:

Electrical Matching Parameters:

• FET Type: P-Channel configuration
• Drain to Source Voltage (Vdss): 40 V rating
• Continuous Drain Current (Id): 7 A at 25°C
• On-State Resistance (Rds On): 18 mOhm maximum at specified conditions
• Power Dissipation: 2.5 W maximum
• Operating Temperature Range: -55°C to 150°C

Mechanical Compatibility Parameters:

• Mounting Type: Surface Mount
• Package Configuration: 8-SOIC (0.154", 3.90mm Width)
• Packaging Format: Tape & Reel (TR)

Regulatory Compliance:

• RoHS3 Compliance
• REACH Status: Unaffected
• Moisture Sensitivity Level (MSL): 3 (168 Hours)

Substitute parts must satisfy all listed parameters without deviation to ensure direct functional replacement in circuit designs.

Parameter Comparison

Engineering Selection Recommendations

The G07P04S is an Active product with full RoHS3 compliance and REACH unaffected status, confirming regulatory suitability for current manufacturing and deployment. The substitute part G07P04S maintains identical electrical specifications, mechanical packaging, and compliance certifications, ensuring direct functional equivalence.

Selection of substitute parts should be based on:

1. Product Status Verification: Confirm Active status for long-term availability and supply chain stability.
2. Compliance Alignment: Verify RoHS3 compliance and REACH status match application requirements.
3. Moisture Sensitivity Handling: Observe MSL 3 (168 Hours) storage and handling protocols during component procurement and assembly.
4. Thermal Management: Ensure circuit design accommodates the 2.5 W maximum power dissipation rating within the -55°C to 150°C operating range.
5. Package Footprint Compatibility: Confirm PCB layout supports 8-SOIC (0.154", 3.90mm Width) surface mount configuration.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the G07P04S?

A: A valid substitute must match all electrical parameters (40 V Vdss, 7 A continuous drain current, 18 mOhm Rds On, 2.5 W power dissipation), operate across the -55°C to 150°C temperature range, use identical 8-SOIC surface mount packaging, and maintain RoHS3 compliance with MSL 3 moisture sensitivity rating.

Q: Can the G07P04S be replaced with a different package type?

A: No. The 8-SOIC (0.154", 3.90mm Width) package is a critical mechanical specification. Substitutes must use the identical package configuration to ensure PCB footprint compatibility and assembly process alignment.

Q: What is the significance of the 18 mOhm Rds On specification?

A: The 18 mOhm on-state resistance at 7 A and 10 V gate-source voltage directly impacts power dissipation and thermal performance. Substitute parts must match this specification to maintain equivalent circuit behavior and thermal characteristics.

Q: Are there any handling considerations for the G07P04S?

A: Yes. The MSL 3 (168 Hours) rating requires that components be stored in controlled humidity environments and used within 168 hours of exposure to ambient conditions exceeding 30°C and 85% relative humidity. Proper moisture barrier packaging and baking procedures must be followed per IPC standards.

Q: How does the P-Channel configuration affect circuit design?

A: P-Channel MOSFETs require gate-source voltage to be negative relative to the source for conduction. The G07P04S operates with Vgs(th) maximum of 2.5 V at 250 µA and Vgs maximum of ±20 V, defining the gate drive voltage requirements and logic interface specifications for the circuit.

Q: What is the TrenchFET® series designation?

A: TrenchFET® is the technology series identifier from Goford Semiconductor. This designation indicates the internal transistor structure and manufacturing process used in the G07P04S, which influences the electrical performance characteristics and reliability profile.

Q: Can the G07P04S operate at the full 40 V Vdss rating continuously?

A: The 40 V Vdss rating is the maximum drain-to-source voltage specification. Continuous operation at this voltage is permissible provided the power dissipation remains within the 2.5 W maximum limit and the junction temperature stays within the -55°C to 150°C operating range.