FZT951TC Equivalent & Substitute Parts

Part Overview

The FZT951TC is a PNP bipolar junction transistor manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-223-3 package. This component operates at 60 V collector-emitter breakdown voltage with a maximum collector current of 5 A and 3 W power dissipation capability. The device is classified as Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Substitute parts are necessary when the primary part number becomes unavailable, when alternative packaging formats are required for manufacturing processes, or when enhanced electrical performance characteristics are needed within the same voltage and package class specifications.

Key Parameters

Parameter	FZT951TC Value	Unit
Transistor Type	PNP	—
Voltage - Collector Emitter Breakdown (Max)	60	V
Current - Collector (Ic) (Max)	5	A
Power - Max	3	W
Frequency - Transition	120	MHz
Operating Temperature Range	-55 to 150	°C
Package / Case	SOT-223-3	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the FZT951TC is determined by the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

Transistor Type: PNP (mandatory match)
Voltage - Collector Emitter Breakdown: 60 V (minimum requirement)
Package / Case: SOT-223-3 or compatible SOT-223 variant (mechanical compatibility)
Mounting Type: Surface Mount (process compatibility)
Operating Temperature Range: -55°C to 150°C (functional envelope)

Secondary Substitution Criteria:

Current - Collector (Ic) (Max): Equal to or greater than 5 A
Power - Max: Equal to or greater than 3 W
Frequency - Transition: Equal to or greater than 120 MHz

Substitute parts are grouped into two categories:

Category 1: Direct Equivalents — Parts with identical or superior electrical specifications and the same packaging format. These include ZX5T951GTA, ZXTP2012GTA, and FZT951TA, all manufactured by Diodes Incorporated with matching or enhanced performance characteristics.

Category 2: Functional Alternatives — Parts that meet the core voltage and package requirements but may have reduced current capacity or power rating. These include BCP52 variants (Nexperia), BSP31,115 (NXP), NSS60600 variants (onsemi), and NZT660 (Fairchild Semiconductor). These parts are suitable for applications where the full 5 A current capability is not required.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) A	Vce Breakdown (Max) V	Power (Max) W	Frequency (Transition) MHz	Package	Packaging Format
FZT951TC	Diodes Incorporated	5	60	3	120	SOT-223-3	Tape & Reel
ZX5T951GTA	Diodes Incorporated	5.5	60	3	120	SOT-223-3	Tape & Reel
ZXTP2012GTA	Diodes Incorporated	5.5	60	3	120	SOT-223-3	Cut Tape & Digi-Reel
FZT951TA	Diodes Incorporated	5	60	3	120	SOT-223-3	Cut Tape & Digi-Reel
BCP52,135	Nexperia USA Inc.	1	60	1	145	SOT-223	Tape & Reel
BCP52-10,135	Nexperia USA Inc.	1	60	1.3	145	SOT-223	Cut Tape & Digi-Reel
BCP52-16,115	Nexperia USA Inc.	1	60	1	145	SOT-223	Tape & Reel
BSP31,115	NXP USA Inc.	1	60	1.3	100	SOT-223	Bulk
NSS60600MZ4T1G	onsemi	6	60	0.8	100	SOT-223	Cut Tape & Digi-Reel
NSS60600MZ4T3G	onsemi	6	60	0.8	100	SOT-223	Tape & Reel
NZT660	Fairchild Semiconductor	3	60	2	75	SOT-223-4	Bulk

Engineering Selection Recommendations

Tier 1 — Direct Substitutes (Preferred)

ZX5T951GTA and ZXTP2012GTA are manufacturer-recommended direct substitutes from Diodes Incorporated. Both parts exceed the FZT951TC specifications with 5.5 A maximum collector current while maintaining identical voltage, power, and frequency ratings. These parts are RoHS3 compliant and carry unlimited moisture sensitivity level. The primary distinction is packaging format: ZX5T951GTA is supplied in Tape & Reel format, while ZXTP2012GTA is available in Cut Tape & Digi-Reel format. Selection between these two depends on manufacturing process requirements.

FZT951TA is a parametric equivalent from Diodes Incorporated with identical electrical specifications to the FZT951TC. This part differs only in packaging format (Cut Tape & Digi-Reel versus Tape & Reel) and is suitable for applications requiring the same performance envelope with alternative supply chain logistics.

Tier 2 — Functional Alternatives (Limited Current Applications)

BCP52 variants (BCP52,135, BCP52-10,135, BCP52-16,115) manufactured by Nexperia are suitable for applications requiring maximum 1 A collector current. These parts maintain the 60 V voltage specification and SOT-223 package compatibility. BCP52-16,115 offers enhanced DC current gain (100 @ 150mA, 2V) compared to other BCP52 variants. All BCP52 parts carry AEC-Q100 automotive qualification. These parts are appropriate for low-current signal switching applications only.

BSP31,115 from NXP USA Inc. is a functional alternative rated for 1 A maximum collector current with 1.3 W power dissipation. This part is suitable for applications where current requirements do not exceed 1 A and is available in bulk packaging format.

Tier 3 — Higher Current Alternatives (Enhanced Current Capability)

NSS60600MZ4T1G and NSS60600MZ4T3G from onsemi provide 6 A maximum collector current, exceeding the FZT951TC specification. These parts maintain 60 V voltage rating and SOT-223 package compatibility. The distinction between these two parts is packaging format: NSS60600MZ4T1G is supplied in Cut Tape & Digi-Reel format, while NSS60600MZ4T3G is supplied in Tape & Reel format. Note that power dissipation is reduced to 800 mW and transition frequency is 100 MHz. These parts are suitable for high-current applications where the FZT951TC current rating is insufficient.

NZT660 from Fairchild Semiconductor is rated for 3 A maximum collector current with 2 W power dissipation and 75 MHz transition frequency. This part is suitable for applications requiring reduced current capacity compared to the FZT951TC and is available in bulk packaging format.

All substitute parts listed maintain RoHS3 compliance and are classified as Active product status.

Frequently Asked Questions (FAQ)

Q: Can ZX5T951GTA be used as a direct replacement for FZT951TC in all applications?

A: Yes. ZX5T951GTA meets or exceeds all electrical specifications of the FZT951TC, including voltage (60 V), current (5.5 A versus 5 A), power (3 W), and frequency (120 MHz) ratings. Both parts use identical SOT-223-3 packaging. The primary consideration is packaging format: ZX5T951GTA is supplied in Tape & Reel format, which may require adjustment to manufacturing processes if the original design specified a different format.

Q: What is the difference between FZT951TA and FZT951TC?

A: FZT951TA and FZT951TC are parametric equivalents with identical electrical specifications. The distinction is packaging format: FZT951TC is supplied in Tape & Reel format, while FZT951TA is supplied in Cut Tape & Digi-Reel format. Both parts are manufactured by Diodes Incorporated and carry the same base product number FZT951.

Q: Can BCP52 variants replace FZT951TC in high-current applications?

A: No. BCP52 variants are rated for maximum 1 A collector current, which is significantly lower than the FZT951TC specification of 5 A. BCP52 parts are suitable only for applications where current requirements do not exceed 1 A. For applications requiring the full 5 A capability, use ZX5T951GTA, ZXTP2012GTA, or FZT951TA.

Q: What are the advantages of NSS60600 variants over FZT951TC?

A: NSS60600MZ4T1G and NSS60600MZ4T3G provide higher maximum collector current (6 A versus 5 A), which is beneficial for applications approaching or exceeding the FZT951TC current limit. However, these parts have reduced power dissipation (800 mW versus 3 W) and lower transition frequency (100 MHz versus 120 MHz). Selection depends on whether the application prioritizes current capacity or power handling capability.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed in this reference are RoHS3 compliant. Compliance status is consistent across all manufacturers represented (Diodes Incorporated, Nexperia, NXP, onsemi, and Fairchild Semiconductor).

Q: What packaging formats are available for FZT951TC substitutes?

A: Substitute parts are available in three packaging formats: Tape & Reel (TR), Cut Tape & Digi-Reel (CT), and Bulk. Tape & Reel format is standard for high-volume automated assembly. Cut Tape & Digi-Reel format is suitable for lower-volume production or mixed-component orders. Bulk format is used for manual assembly or specialized applications. Selection depends on manufacturing process requirements and order volume.

Q: Can NZT660 be used as a substitute for FZT951TC?

A: NZT660 is a functional alternative suitable only for applications where maximum collector current does not exceed 3 A. This part maintains the 60 V voltage specification and SOT-223 package compatibility but has reduced power dissipation (2 W versus 3 W) and lower transition frequency (75 MHz versus 120 MHz). For applications requiring the full 5 A current capability of the FZT951TC, use higher-rated alternatives such as ZX5T951GTA or NSS60600 variants.

Q: What is the significance of DC Current Gain (hFE) differences among substitute parts?

A: DC Current Gain (hFE) determines the amplification factor of the transistor. FZT951TC specifies minimum hFE of 100 @ 2A, 1V. Substitute parts with different hFE specifications may exhibit different switching characteristics. BCP52-16,115 offers hFE of 100 @ 150mA, 2V, which differs from the FZT951TC specification point. NSS60600 variants specify hFE of 120 @ 1A, 2V. These differences are acceptable for most applications but should be verified against specific circuit requirements.

Q: Are automotive-grade alternatives available?

A: Yes. BCP52 variants (BCP52,135, BCP52-10,135, BCP52-16,115) carry AEC-Q100 automotive qualification from Nexperia. These parts are suitable for automotive applications requiring qualified components. However, BCP52 variants are limited to 1 A maximum collector current and are not suitable for high-current applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message