FZT653TC Equivalent & Substitute Parts

Part Overview

The FZT653TC is an NPN bipolar junction transistor manufactured by Diodes Incorporated, designed for general-purpose switching and amplification applications. This device operates at 100 V collector-emitter breakdown voltage with a maximum collector current of 2 A and is housed in a SOT-223-3 surface mount package. The part is currently in active production status with 19,033 units in stock. Equivalent and substitute parts are identified to provide design flexibility, accommodate supply chain variations, and support alternative packaging requirements while maintaining functional compatibility within specified electrical parameters.

Key Parameters

Parameter	FZT653TC Value	Unit
Transistor Type	NPN	—
Collector Current (Max)	2	A
Collector-Emitter Breakdown Voltage (Max)	100	V
Vce Saturation (Max)	500 mV @ 200 mA, 2 A	—
Collector Cutoff Current (Max)	100	nA
DC Current Gain (hFE Min)	100 @ 500 mA, 2 V	—
Power Dissipation (Max)	2	W
Transition Frequency	175	MHz
Operating Temperature Range	-55 to 150	°C
Mounting Type	Surface Mount	—
Package	SOT-223-3	—
RoHS Status	ROHS3 Compliant	—
MSL Rating	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the FZT653TC are classified based on electrical parameter compatibility and packaging format. The primary substitution criteria are:

Critical Parameters for Substitution:

Transistor type: NPN configuration
Collector current rating: 2 A maximum
Collector-emitter breakdown voltage: 100 V
Mounting type: Surface mount
RoHS3 compliance and MSL 1 rating

Grouping Logic:

Group 1: Parametric Equivalents (Identical Electrical Specifications, Packaging Variation) Parts with identical electrical ratings but different tape and reel packaging formats. These are direct substitutes with no functional differences.

Group 2: Manufacturer Recommended Alternatives (Electrical Variations Within Acceptable Range) Parts from alternative manufacturers that meet the core voltage and current requirements but may differ in secondary parameters such as transition frequency, power dissipation, saturation voltage, or DC current gain. These parts are suitable for applications where the primary design constraints are voltage and current ratings.

Group 3: Enhanced Performance Alternatives (Superior Electrical Characteristics) Parts that exceed the baseline specifications in transition frequency, power dissipation, or current gain while maintaining voltage and current compatibility. These are applicable in designs requiring improved performance margins.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) A	Vce(br) V	Vce Sat (Max) mV	hFE (Min)	Power (Max) W	Freq (Max) MHz	Temp Range °C	Package	Packaging Format
FZT653TC	Diodes Inc.	2	100	500 @ 200mA, 2A	100 @ 500mA, 2V	2	175	-55 to 150	SOT-223-3	Tape & Reel
FZT653TA	Diodes Inc.	2	100	500 @ 200mA, 2A	100 @ 500mA, 2V	2	175	-55 to 150	SOT-223-3	Cut Tape & Digi-Reel
NSS1C201MZ4T3G	onsemi	2	100	180 @ 200mA, 2A	120 @ 500mA, 2V	0.8	100	-55 to 150	SOT-223	Tape & Reel
NSS1C201MZ4T1G	onsemi	2	100	180 @ 200mA, 2A	120 @ 500mA, 2V	0.8	100	-55 to 150	SOT-223	Cut Tape & Digi-Reel
2SC3647T-TD-E	onsemi	2	100	400 @ 100mA, 1A	100 @ 100mA, 5V	0.5	120	-40 to 150	PCP	Cut Tape & Digi-Reel
2SC3647S-TD-E	onsemi	2	100	400 @ 100mA, 1A	100 @ 100mA, 5V	0.5	120	-40 to 150	PCP	Tape & Reel
2SC6096-TD-E	onsemi	2	100	150 @ 100mA, 1A	300 @ 100mA, 5V	1.3	300	-40 to 150	PCP	Cut Tape & Digi-Reel
PBSS8110Z,135	Nexperia USA Inc.	1	100	200 @ 100mA, 1A	150 @ 250mA, 10V	1.4	100	-40 to 150	SOT-223	Cut Tape & Digi-Reel

Engineering Selection Recommendations

FZT653TA (Diodes Incorporated) This part is a direct parametric equivalent to the FZT653TC with identical electrical specifications. Selection is based on packaging format availability. The FZT653TA is supplied in Cut Tape and Digi-Reel format with 66,300 units in stock, compared to 19,033 units for the FZT653TC in Tape & Reel format. Both parts are ROHS3 compliant with MSL 1 rating and active production status. Use FZT653TA when Cut Tape or Digi-Reel packaging is required or when higher inventory availability is a supply chain consideration.

NSS1C201MZ4T3G and NSS1C201MZ4T1G (onsemi) These onsemi parts maintain the 2 A collector current and 100 V breakdown voltage specifications with identical SOT-223 package compatibility. The NSS1C201 series exhibits lower saturation voltage (180 mV versus 500 mV) and improved DC current gain (120 versus 100), resulting in reduced power dissipation in switching applications. Transition frequency is reduced to 100 MHz from 175 MHz. Both parts are ROHS3 compliant with MSL 1 rating and active production status. The NSS1C201MZ4T3G is available in Tape & Reel format (20,400 units), while NSS1C201MZ4T1G is available in Cut Tape & Digi-Reel format (26,100 units). Selection between these variants depends on packaging format requirements.

2SC3647T-TD-E and 2SC3647S-TD-E (onsemi) These onsemi parts maintain 2 A collector current and 100 V breakdown voltage but are housed in PCP package format. Power dissipation is reduced to 500 mW, and transition frequency is 120 MHz. Saturation voltage is higher at 400 mV. These parts are suitable for applications where package footprint differs from SOT-223 and power dissipation is not a primary constraint. Both are ROHS3 compliant with MSL 1 rating and active production status. The 2SC3647T-TD-E is supplied in Cut Tape & Digi-Reel format (13,200 units), while 2SC3647S-TD-E is supplied in Tape & Reel format (1,675 units).

2SC6096-TD-E (onsemi) This onsemi part provides enhanced performance with 300 MHz transition frequency and 1.3 W power dissipation, exceeding the FZT653TC baseline. Collector current and breakdown voltage remain at 2 A and 100 V. Saturation voltage is significantly reduced to 150 mV, and DC current gain is elevated to 300. The PCP package format differs from SOT-223. This part is suitable for high-frequency applications requiring improved switching performance. ROHS3 compliant with MSL 1 rating and active production status. Available in Cut Tape & Digi-Reel format with 3,415 units in stock.

PBSS8110Z,135 (Nexperia USA Inc.) This Nexperia part is rated for 1 A maximum collector current, which is below the 2 A specification of the FZT653TC. It is included as a substitute only for applications where the design current requirement does not exceed 1 A. The part offers 1.4 W power dissipation and 100 MHz transition frequency. It carries automotive qualification (AEC-Q100) and is ROHS3 compliant with MSL 1 rating. Available in Cut Tape & Digi-Reel format with 13,598 units in stock. Use only when current requirements are confirmed to be 1 A or less.

Frequently Asked Questions (FAQ)

Q: Can FZT653TA be used as a direct replacement for FZT653TC? A: Yes. FZT653TA is a parametric equivalent with identical electrical specifications. The only difference is the packaging format: FZT653TA is supplied in Cut Tape and Digi-Reel format, while FZT653TC is supplied in Tape & Reel format. Both are manufactured by Diodes Incorporated and are ROHS3 compliant with MSL 1 rating.

Q: What are the key differences between the Diodes Incorporated FZT653 series and the onsemi NSS1C201 series? A: Both maintain 2 A collector current and 100 V breakdown voltage in SOT-223 packages. The NSS1C201 series exhibits lower saturation voltage (180 mV versus 500 mV), higher DC current gain (120 versus 100), and lower power dissipation (800 mW versus 2 W). Transition frequency is reduced from 175 MHz to 100 MHz. The NSS1C201 is preferred for applications prioritizing low saturation voltage and power efficiency.

Q: Why is the PBSS8110Z,135 listed as a substitute if it has a lower current rating? A: The PBSS8110Z,135 is included for applications where the design current requirement does not exceed 1 A. It is not a universal substitute for the FZT653TC. Verification that the application operates at 1 A or below is required before selection.

Q: What is the difference between the 2SC3647 and 2SC6096 parts? A: Both maintain 2 A collector current and 100 V breakdown voltage. The 2SC6096 provides superior performance with 300 MHz transition frequency (versus 120 MHz), 1.3 W power dissipation (versus 500 mW), and significantly lower saturation voltage (150 mV versus 400 mV). The 2SC6096 is suitable for high-frequency switching applications requiring improved performance margins.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All substitute parts listed are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the compliance profile of the FZT653TC.

Q: What packaging formats are available for the substitute parts? A: Substitute parts are available in three packaging formats: Tape & Reel (TR), Cut Tape (CT) & Digi-Reel, and PCP. The FZT653TC and FZT653TA are available in SOT-223-3 package. The NSS1C201 series is available in SOT-223 package. The 2SC3647 and 2SC6096 series are available in PCP package. Selection depends on assembly equipment compatibility and procurement requirements.

Q: Can parts with different package types be used interchangeably? A: No. Parts with different package types (SOT-223 versus PCP) have different physical dimensions and pin configurations. PCB layout and assembly equipment must be compatible with the selected package type. Verify package compatibility before substitution.

Q: What is the operating temperature range for each substitute part? A: The FZT653TC, FZT653TA, NSS1C201MZ4T3G, and NSS1C201MZ4T1G operate from -55°C to 150°C. The 2SC3647 series, 2SC6096, and PBSS8110Z,135 operate from -40°C to 150°C. Applications requiring operation below -40°C must use the Diodes Incorporated or onsemi NSS1C201 series.

Q: How do saturation voltage differences affect circuit performance? A: Lower saturation voltage reduces power dissipation in switching applications. The FZT653TC has 500 mV saturation voltage, while the NSS1C201 series has 180 mV and the 2SC6096 has 150 mV. In high-current switching circuits, lower saturation voltage results in reduced heat generation and improved efficiency. Circuit design must account for these differences in switching loss calculations.

Q: What inventory levels are available for each substitute part? A: FZT653TC: 19,033 units; FZT653TA: 66,300 units; NSS1C201MZ4T3G: 20,400 units; NSS1C201MZ4T1G: 26,100 units; 2SC3647T-TD-E: 13,200 units; 2SC3647S-TD-E: 1,675 units; 2SC6096-TD-E: 3,415 units; PBSS8110Z,135: 13,598 units. Inventory levels support supply chain planning and long-term availability assessment.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message