FZT1147ATC Equivalent & Substitute Parts

Part Overview

The FZT1147ATC is a PNP bipolar junction transistor manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-223-3 package. This component operates at 12 V with a maximum collector current of 5 A and a maximum power dissipation of 2.5 W. The device is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design requirements and production continuity.

Key Parameters

Parameter	Value
Transistor Type	PNP
Voltage - Collector Emitter Breakdown (Max)	12 V
Current - Collector (Ic) (Max)	5 A
Power - Max	2.5 W
Mounting Type	Surface Mount
Package / Case	SOT-223-3
Operating Temperature Range	-55°C to 150°C
Frequency - Transition	115 MHz

Substitute Part Grouping Explanation

Substitution of the FZT1147ATC is based on electrical and mechanical compatibility within the PNP bipolar transistor category. The primary substitution criteria are:

Electrical Parameters:

Transistor polarity (PNP)
Voltage rating (minimum 12 V collector-emitter breakdown)
Current capability (minimum 5 A collector current)
Power dissipation (minimum 2.5 W)
Operating temperature range compatibility

Mechanical Parameters:

Surface mount packaging
SOT-223 package family compatibility
Pin configuration alignment (TO-261-4, TO-261AA)

The PBSS301PZ,135 meets these substitution criteria through equivalent electrical ratings and identical package specifications.

Parameter Comparison

Parameter	FZT1147ATC	PBSS301PZ,135
Manufacturer	Diodes Incorporated	Nexperia USA Inc.
Transistor Type	PNP	PNP
Voltage - Collector Emitter Breakdown (Max)	12 V	12 V
Current - Collector (Ic) (Max)	5 A	5.7 A
Vce Saturation (Max)	400 mV @ 50 mA, 5 A	245 mV @ 285 mA, 5.7 A
Current - Collector Cutoff (Max)	100 nA	100 nA
DC Current Gain (hFE) (Min)	250 @ 500 mA, 2 V	200 @ 2 A, 2 V
Power - Max	2.5 W	2 W
Frequency - Transition	115 MHz	140 MHz
Operating Temperature (TJ)	-55°C to 150°C	150°C
Mounting Type	Surface Mount	Surface Mount
Package / Case	SOT-223-3	SOT-223
Product Status	Obsolete	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

The PBSS301PZ,135 serves as a direct substitute for the obsolete FZT1147ATC based on the following factors:

Electrical Compatibility: The PBSS301PZ,135 exceeds the collector current specification (5.7 A versus 5 A) and maintains the 12 V voltage rating. The transition frequency is higher (140 MHz versus 115 MHz), providing improved switching performance. Both devices exhibit identical collector cutoff current specifications.

Mechanical Compatibility: Both components utilize the SOT-223 surface mount package with identical pin configurations (TO-261-4, TO-261AA), enabling direct board-level replacement without layout modifications.

Compliance and Status: The PBSS301PZ,135 is an active product with ROHS3 compliance and AEC-Q100 automotive qualification. The FZT1147ATC is classified as obsolete, making the PBSS301PZ,135 the appropriate selection for new designs and production continuity.

Thermal Considerations: The PBSS301PZ,135 specifies a maximum junction temperature of 150°C, matching the upper limit of the FZT1147ATC operating range. The lower maximum power rating (2 W versus 2.5 W) requires thermal design verification in applications approaching maximum power dissipation.

Frequently Asked Questions (FAQ)

Q: Can the PBSS301PZ,135 directly replace the FZT1147ATC in existing designs?

A: Yes. Both devices share identical voltage ratings (12 V), equivalent current capabilities (5.7 A versus 5 A), and identical SOT-223 package specifications. Direct board-level substitution is supported without circuit modifications.

Q: What are the key differences between these two transistors?

A: The PBSS301PZ,135 provides higher collector current (5.7 A), improved transition frequency (140 MHz), lower saturation voltage (245 mV), and active product status. The FZT1147ATC offers higher maximum power dissipation (2.5 W) and a wider operating temperature range specification.

Q: Are there packaging considerations for this substitution?

A: Both devices use the SOT-223 surface mount package with identical pin configurations. No PCB layout changes are required for substitution.

Q: What is the significance of the FZT1147ATC being obsolete?

A: Obsolete status indicates the component is no longer manufactured or supported by the original supplier. The PBSS301PZ,135 is an active product with ongoing availability and manufacturer support.

Q: Does the PBSS301PZ,135 meet the same compliance standards?

A: Yes. Both devices are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity ratings. The PBSS301PZ,135 additionally carries AEC-Q100 automotive qualification.

Q: Should thermal design be adjusted when substituting to the PBSS301PZ,135?

A: The PBSS301PZ,135 has a lower maximum power rating (2 W versus 2.5 W). Applications operating near maximum power dissipation require thermal analysis to confirm the substitute device remains within safe operating limits.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message