FX8C-60P-SV2(93) Equivalent & Substitute Parts

Part Overview

The FX8C-60P-SV2(93) is a 60-position rectangular connector header manufactured by Hirose Electric Co Ltd, part of the FunctionMax™ FX8C series. This surface mount component features outer shroud contacts with gold plating and is designed for applications requiring reliable high-density interconnection. The part is currently active in production with full RoHS compliance and MSL 1 rating, indicating no moisture sensitivity restrictions. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same connector family.

Substiute Parts

FX8C-60P-SV2(93)

Hirose Electric Co LtdIn Stock: 778FX8C-60P-SV2(93) Datasheet

Current PartRFQ

FX8C-60P-SV2(92)

Hirose Electric Co LtdIn Stock: 2847FX8C-60P-SV2(92) Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FX8C-60P-SV2(93) are identified based on strict equivalence of the following critical parameters:

• Number of Positions: 60
• Pitch: 0.024" (0.60mm)
• Number of Rows: 2
• Connector Type: Header, Outer Shroud Contacts
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Height Above Board: 0.254" (6.45mm)
• Mated Stacking Heights: 7mm, 12mm
• Series: FunctionMax™ FX8C
• RoHS Compliance: Required
• Moisture Sensitivity Level: 1

The FX8C-60P-SV2(92) maintains all electrical and mechanical parameters identical to the main part, differing only in manufacturing lot designation. Both parts are manufactured by Hirose Electric Co Ltd within the same FunctionMax™ FX8C series and are suitable for direct substitution in applications requiring 60-position surface mount rectangular connectors with 0.60mm pitch.

Parameter Comparison

Engineering Selection Recommendations

Both the FX8C-60P-SV2(93) and FX8C-60P-SV2(92) are active production parts with full RoHS compliance and MSL 1 rating. The parts are electrically and mechanically identical, with substitution determined solely by manufacturing lot availability. Selection between these parts should be based on inventory availability and lead time requirements. The FX8C-60P-SV2(92) currently maintains higher inventory levels (2760 pcs) compared to the FX8C-60P-SV2(93) (726 pcs), making it suitable for applications with extended production runs or immediate fulfillment needs.

Frequently Asked Questions (FAQ)

Q: Can FX8C-60P-SV2(92) be used as a direct replacement for FX8C-60P-SV2(93)?

A: Yes. Both parts are identical in electrical and mechanical specifications, including position count, pitch, mounting type, contact finish, and board height. The difference is limited to manufacturing lot designation.

Q: What determines compatibility between these connector parts?

A: Compatibility is determined by matching the following parameters: number of positions (60), pitch (0.024"/0.60mm), number of rows (2), connector type (header with outer shroud contacts), mounting type (surface mount), contact finish (gold), and board height (0.254"/6.45mm). Both parts meet these criteria.

Q: Are there any compliance or environmental differences between these parts?

A: No. Both parts carry identical RoHS compliance status and MSL 1 rating, indicating no moisture sensitivity restrictions and full compliance with environmental regulations.

Q: What is the significance of the lot designation in the part number?

A: The lot designation (93 or 92) identifies the manufacturing batch. Parts from different lots maintain identical specifications and are fully interchangeable from an engineering perspective.

Q: Should packaging format be considered when selecting between these parts?

A: Both parts are supplied in Tape & Reel (TR) packaging, which is standard for surface mount components. Packaging format is identical and does not affect substitution eligibility.