FX8-100S-SV(23) Equivalent & Substitute Parts

Part Overview

The FX8-100S-SV(23) is a 100-position rectangular connector receptacle manufactured by Hirose Electric Co Ltd as part of the FunctionMax™ FX8 series. This surface mount connector features center strip contacts with gold plating and is designed for high-density interconnect applications. The part is currently active in production with full RoHS compliance and unlimited moisture sensitivity rating. Substitute parts are identified when packaging or distribution formats differ while maintaining identical electrical and mechanical specifications.

Substiute Parts

FX8-100S-SV(23)

Hirose Electric Co LtdIn Stock: 2045FX8-100S-SV(23) Datasheet

Current PartRFQ

FX8-100S-SV(22)

Hirose Electric Co LtdIn Stock: 2250FX8-100S-SV(22) Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The FX8-100S-SV(23) has one identified parametric equivalent: FX8-100S-SV(22). These parts are functionally interchangeable based on the following critical parameters that define substitution eligibility:

• Number of Positions: 100
• Pitch: 0.024" (0.60mm)
• Number of Rows: 2
• Connector Type: Receptacle, Center Strip Contacts
• Mounting Type: Surface Mount
• Contact Finish: Gold
• Mated Stacking Heights: 3mm, 4mm
• Height Above Board: 0.089" (2.26mm)
• Base Product Number: FX8

The substitution is valid because all electrical and mechanical parameters remain identical. The difference between these parts is limited to packaging format: FX8-100S-SV(23) is supplied in Tape & Reel (TR) format, while FX8-100S-SV(22) is supplied in Cut Tape (CT) format. Both formats contain the same component with identical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both FX8-100S-SV(23) and FX8-100S-SV(22) are active production parts with full compliance certifications. The FX8-100S-SV(23) in Tape & Reel format is suitable for high-volume automated assembly operations where continuous reel feeding is required. The FX8-100S-SV(22) in Cut Tape format is appropriate for lower-volume applications or manual assembly processes where individual component handling is preferred.

Selection between these parts should be based on assembly equipment capability and production volume requirements rather than electrical or mechanical performance, as both parts are electrically and mechanically identical. The FX8-100S-SV(22) carries ROHS3 compliance designation compared to the RoHS Compliant designation of FX8-100S-SV(23), with both meeting unlimited moisture sensitivity requirements.

Frequently Asked Questions (FAQ)

Q: Are FX8-100S-SV(23) and FX8-100S-SV(22) electrically identical?

A: Yes. Both parts have identical electrical specifications including 100 positions, 0.024" (0.60mm) pitch, gold contact finish, and surface mount configuration. They are direct functional equivalents.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut Tape (CT) packaging supplies components on tape segments, typically used for lower-volume or manual assembly processes. The component itself is identical in both formats.

Q: Can I use FX8-100S-SV(22) in place of FX8-100S-SV(23) in my design?

A: Yes, provided your assembly process can accommodate Cut Tape format. The mechanical and electrical performance are identical, making this a valid substitution from a component specification standpoint.

Q: Are there any compliance differences between these parts?

A: Both parts meet RoHS requirements and have unlimited moisture sensitivity rating (MSL 1). The FX8-100S-SV(22) carries ROHS3 designation while FX8-100S-SV(23) carries RoHS Compliant designation. Both are suitable for applications requiring RoHS compliance.

Q: What are the mated stacking heights?

A: Both parts support mated stacking heights of 3mm and 4mm, with a height above board of 0.089" (2.26mm). These dimensions are identical across both part numbers.