FX11LA-92S-SV Equivalent & Substitute Parts

Part Overview

The FX11LA-92S-SV is a 92-position rectangular connector receptacle manufactured by Hirose Electric Co Ltd, designed for surface mount applications with center strip contacts and gold plating. This connector is classified as Active product status and is RoHS compliant. Substitute parts are identified when packaging or inventory requirements differ while maintaining identical electrical and mechanical specifications, allowing for flexible sourcing without design modification.

Substiute Parts

FX11LA-92S-SV

Hirose Electric Co LtdIn Stock: 796FX11LA-92S-SV Datasheet

Current PartRFQ

FX11LA-92S-SV(21)

Hirose Electric Co LtdIn Stock: 1987FX11LA-92S-SV(21) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the FX11LA-92S-SV is determined by strict equivalence across all electrical and mechanical parameters. The primary differentiator between the main part and its substitute is packaging configuration. Both parts maintain identical specifications for connector position count (92), pitch (0.50mm), row configuration (2), contact finish (gold at 4.00µin thickness), mounting type (surface mount), and physical dimensions (2mm mated stacking height, 0.065" height above board). The substitute part FX11LA-92S-SV(21) differs only in packaging format, supplied in Tape & Reel (TR) configuration versus the original Bag packaging. This packaging distinction allows for alternative sourcing strategies while preserving full functional and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both FX11LA-92S-SV and FX11LA-92S-SV(21) are Active product status components manufactured by Hirose Electric Co Ltd with full RoHS compliance and MSL 1 rating. Selection between these parts should be based on procurement and assembly requirements. The main part in Bag packaging is suitable for lower-volume applications or manual assembly workflows. The substitute part in Tape & Reel packaging is optimized for high-volume automated assembly processes and provides improved component handling efficiency. Both parts carry identical electrical and mechanical specifications, ensuring direct interchangeability in circuit design and PCB layout without modification.

Frequently Asked Questions (FAQ)

Q: Can FX11LA-92S-SV(21) be used as a direct replacement for FX11LA-92S-SV?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel versus Bag). They are fully interchangeable in design and function.

Q: What is the significance of the packaging difference?

A: Packaging affects supply chain logistics and assembly automation compatibility. Tape & Reel packaging is standard for automated pick-and-place assembly, while Bag packaging is typical for manual assembly or lower-volume applications. The connector itself is unchanged.

Q: Are both parts RoHS compliant?

A: Yes. Both FX11LA-92S-SV and FX11LA-92S-SV(21) are RoHS compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What are the critical parameters for substitution?

A: Substitution is valid when the following parameters remain identical: 92 positions, 0.50mm pitch, 2-row configuration, gold contact finish at 4.00µin thickness, surface mount type, 2mm mated stacking height, and 0.065" height above board.

Q: Is there a difference in contact reliability between these parts?

A: No. Both parts use identical contact materials, finish specifications, and manufacturing processes. Contact reliability is equivalent.