FTSH-115-01-L-DV-P Equivalent & Substitute Parts

Part Overview

The FTSH-115-01-L-DV-P is a surface mount rectangular connector header manufactured by Samtec Inc., designed for board-to-board or cable applications. This 30-position, 2-row connector operates across a wide temperature range and meets RoHS3 compliance requirements. The part is currently active in production with 1935 units in stock. Substitute parts are identified to address inventory availability, lead time constraints, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

FTSH-115-01-L-DV-P

Samtec Inc.In Stock: 2043FTSH-115-01-L-DV-P Datasheet

Current PartRFQ

FTS-115-01-L-DV-P

Samtec Inc.In Stock: 1667FTS-115-01-L-DV-P Datasheet

SimilarRFQ

FTS-115-01-LM-DV-P

Samtec Inc.In Stock: 1036FTS-115-01-LM-DV-P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FTSH-115-01-L-DV-P are qualified based on strict electrical and mechanical parameter matching. The following parameters must remain identical for substitution eligibility:

• Number of Positions: 30
• Number of Rows: 2
• Pitch - Mating: 0.050" (1.27mm)
• Row Spacing - Mating: 0.050" (1.27mm)
• Contact Type: Male Pin
• Mounting Type: Surface Mount
• Termination: Solder
• Contact Length - Mating: 0.120" (3.05mm)
• Contact Material: Phosphor Bronze
• Contact Finish - Mating: Gold
• Current Rating: 3.4A per Contact
• Operating Temperature: -55°C ~ 125°C
• Insulation Material: Liquid Crystal Polymer (LCP)
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitutes belong to the FTS series (FTS-115-01-L-DV-P and FTS-115-01-LM-DV-P), which share the same base product number platform (FTS-115) and maintain all critical electrical and mechanical specifications. The primary difference is the insulation height, which varies between the FTSH series (0.099") and FTS series (0.034"), representing a design variation within the same connector family that does not affect functional compatibility for standard board-to-board applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status with ROHS3 compliance and identical electrical specifications. Selection between FTSH-115-01-L-DV-P and its FTS series substitutes should be based on:

Primary Consideration: Insulation Height The FTSH series features an insulation height of 0.099" (2.51mm), while both FTS substitutes feature 0.034" (0.86mm). This dimensional difference affects board-level clearance and stacking height in multi-connector applications. Verify PCB layout constraints and mating connector specifications before substitution.

Secondary Consideration: Inventory Availability FTSH-115-01-L-DV-P maintains the highest inventory level at 1935 units. FTS-115-01-L-DV-P provides 1629 units, and FTS-115-01-LM-DV-P provides 960 units. Selection may be driven by lead time requirements and supply chain considerations.

Compliance and Certification All parts meet UL94 V-0 flammability requirements, maintain MSL 1 (unlimited moisture sensitivity), and comply with ROHS3 regulations. No additional qualification is required for regulatory substitution.

Frequently Asked Questions (FAQ)

Q: Can FTS-115-01-L-DV-P or FTS-115-01-LM-DV-P be used as direct replacements for FTSH-115-01-L-DV-P?

A: Electrical compatibility is confirmed. All three parts share identical contact pitch (0.050"), row spacing (0.050"), contact type (male pin), current rating (3.4A per contact), and operating temperature range (-55°C ~ 125°C). The primary difference is insulation height. Verify that the reduced insulation height of the FTS series (0.034" vs. 0.099") does not conflict with your PCB layout, clearance requirements, or mating connector specifications.

Q: What is the significance of the insulation height difference?

A: Insulation height determines the overall profile of the connector body. The FTSH series has a taller insulation profile (0.099"), while the FTS series has a lower profile (0.034"). This affects vertical clearance on the PCB and the stacking height when multiple connectors are used in proximity. Confirm your design accommodates the selected profile before implementation.

Q: Are there any differences in contact finish or material between these parts?

A: No. All three parts use phosphor bronze contact material with gold mating finish (10.0µin / 0.25µm thickness) and tin post finish. Contact specifications are identical across all substitutes.

Q: Do all parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant, UL94 V-0 rated, and carry MSL 1 (unlimited) moisture sensitivity level. No additional qualification or testing is required for regulatory substitution.

Q: What is the difference between FTS-115-01-L-DV-P and FTS-115-01-LM-DV-P?

A: Both FTS substitutes maintain identical electrical and mechanical specifications. The designation difference (L vs. LM) reflects series nomenclature within the FTS family. Electrical and physical compatibility with FTSH-115-01-L-DV-P is equivalent for both variants.

Q: Can these connectors be cut to reduce the number of positions?

A: Yes. All three parts are specified as "Header, Cuttable," allowing position reduction through mechanical cutting. Cutting does not affect the electrical specifications of remaining positions.