FTSH-112-02-L-DV Equivalent & Substitute Parts

Part Overview

The FTSH-112-02-L-DV is a surface mount rectangular connector header manufactured by Samtec Inc., designed for board-to-board or cable interconnection applications. This 24-position, dual-row connector operates across industrial temperature ranges and maintains active product status with full RoHS3 compliance. Substitute parts are identified to address inventory availability, packaging preferences, or specific mechanical requirements while maintaining electrical and functional compatibility.

Substiute Parts

FTSH-112-02-L-DV

Samtec Inc.In Stock: 1140FTSH-112-02-L-DV Datasheet

Current PartRFQ

FTS-112-02-L-DV

Samtec Inc.In Stock: 804FTS-112-02-L-DV Datasheet

SimilarRFQ

FTSH-112-01-L-DV

Samtec Inc.In Stock: 948FTSH-112-01-L-DV Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FTSH-112-02-L-DV is determined by strict alignment of the following critical parameters:

• Connector type (Header, Cuttable)
• Contact type (Male Pin)
• Number of positions (24) and rows (2)
• Pitch and row spacing (0.050" / 1.27mm)
• Mounting type (Surface Mount)
• Termination method (Solder)
• Current rating (3.4A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• RoHS3 compliance status

The identified substitute parts FTS-112-02-L-DV and FTSH-112-01-L-DV meet all critical electrical and mechanical parameters. Variations exist only in packaging format, insulation height, and contact length specifications, which do not affect functional interchangeability in standard board-to-board applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status and full ROHS3 compliance, ensuring regulatory alignment for current and future applications. Selection between the main part and substitutes depends on specific design constraints:

FTS-112-02-L-DV presents a reduced insulation height of 0.034" (0.86mm) compared to the main part's 0.099" (2.51mm), suitable for space-constrained PCB layouts. This variant maintains identical electrical performance and current rating.

FTSH-112-01-L-DV features an extended contact length of 0.120" (3.05mm) versus the main part's 0.075" (1.90mm), accommodating deeper mating depths or applications requiring increased contact engagement. Insulation height remains consistent with the main part.

Packaging format differs between tube (main and FTS variant) and bulk (FTSH-01 variant), affecting procurement and handling procedures but not functional performance.

Frequently Asked Questions (FAQ)

Q: Can FTS-112-02-L-DV be used as a direct replacement for FTSH-112-02-L-DV?

A: FTS-112-02-L-DV is electrically and mechanically compatible for standard board-to-board applications. The primary difference is reduced insulation height (0.034" vs 0.099"), which may affect PCB layout clearances. Verify insulation height compatibility with your specific PCB design before substitution.

Q: What is the key difference between FTSH-112-01-L-DV and the main part?

A: FTSH-112-01-L-DV features extended contact length (0.120" vs 0.075"), providing deeper mating engagement. All electrical parameters, current ratings, and temperature specifications remain identical. Selection depends on mating depth requirements.

Q: Are all three parts RoHS3 compliant?

A: Yes. FTSH-112-02-L-DV, FTS-112-02-L-DV, and FTSH-112-01-L-DV all carry ROHS3 Compliant status with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Does packaging format affect connector performance?

A: No. Tube and bulk packaging formats do not affect electrical or mechanical performance. Packaging selection is based on procurement volume and handling requirements.

Q: What is the operating temperature range for all substitute parts?

A: All parts operate across -55°C to 125°C, supporting industrial and commercial temperature environments.

Q: Can these connectors be used interchangeably in high-current applications?

A: Yes. All three parts maintain 3.4A per contact current rating. Verify total current draw against the number of loaded positions in your application.