FTS-110-04-L-DV-A-P-TR Equivalent & Substitute Parts

Part Overview

The FTS-110-04-L-DV-A-P-TR is a surface mount rectangular connector header manufactured by Samtec Inc. This 20-position, 2-row connector operates across -55°C to 125°C and is designed for board-to-board or cable applications with push-pull fastening. The part is active in production with ROHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct functional replacement in applications where connector performance requirements remain constant.

Substiute Parts

FTS-110-04-L-DV-A-P-TR

Samtec Inc.In Stock: 789FTS-110-04-L-DV-A-P-TR Datasheet

Current PartRFQ

FTSH-110-04-L-DV-A-P-TR

Samtec Inc.In Stock: 1290FTSH-110-04-L-DV-A-P-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FTS-110-04-L-DV-A-P-TR is determined by strict alignment of the following parameters:

• Connector type (Header, Cuttable)
• Contact type (Male Pin)
• Pitch - Mating (0.050" / 1.27mm)
• Number of positions (20)
• Number of rows (2)
• Row spacing - Mating (0.050" / 1.27mm)
• Mounting type (Surface Mount)
• Termination method (Solder)
• Fastening type (Push-Pull)
• Contact finish - Mating (Gold)
• Current rating (3.4A per Contact)
• Operating temperature range (-55°C ~ 125°C)
• Material flammability rating (UL94 V-0)
• RoHS compliance (ROHS3 Compliant)

The FTSH-110-04-L-DV-A-P-TR meets all these criteria and is classified as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the FTS-110-04-L-DV-A-P-TR and FTSH-110-04-L-DV-A-P-TR are active production parts with identical electrical and mechanical specifications. Both maintain ROHS3 compliance, UL94 V-0 flammability certification, and equivalent current and temperature ratings. The primary difference is insulation height: FTS-110 measures 0.034" (0.86mm) while FTSH-110 measures 0.099" (2.51mm). Selection between these parts depends on board layout constraints and mating connector specifications. Both parts are suitable for applications requiring surface mount rectangular connectors with 1.27mm pitch and push-pull fastening in the specified temperature range.

Frequently Asked Questions (FAQ)

Q: Can FTSH-110-04-L-DV-A-P-TR directly replace FTS-110-04-L-DV-A-P-TR?

A: Yes, provided that the increased insulation height of 0.099" (2.51mm) versus 0.034" (0.86mm) does not conflict with board layout or mating connector specifications. All electrical parameters, contact configurations, and compliance certifications are identical.

Q: What is the significance of the insulation height difference?

A: Insulation height affects the overall profile of the connector on the PCB. The FTSH variant has greater insulation height, which may impact clearance requirements and mating connector compatibility. Verify that the mating connector accommodates the taller insulation profile.

Q: Are both parts available in the same packaging?

A: Yes, both FTS-110-04-L-DV-A-P-TR and FTSH-110-04-L-DV-A-P-TR are supplied in Tape & Reel (TR) packaging suitable for automated assembly.

Q: Do both parts meet the same compliance standards?

A: Yes, both parts are ROHS3 compliant, UL94 V-0 rated, and carry identical ECCN and HTSUS classifications.

Q: What is the current handling capacity per contact?

A: Both parts are rated for 3.4A per contact, supporting equivalent power distribution in board-to-board or cable applications.