FTR-110-03-G-D-LC-10 Equivalent & Substitute Parts

Part Overview

The FTR-110-03-G-D-LC-10 is a rectangular connector header manufactured by Samtec Inc., designed for surface mount board-to-board applications. This connector features 20 positions arranged in 2 rows with 0.050" (1.27mm) pitch spacing and is classified as an active product. Alternative part numbers within the same series are available to support procurement flexibility and inventory optimization while maintaining identical electrical and mechanical specifications.

Substiute Parts

FTR-110-03-G-D-LC-10

Samtec Inc.In Stock: 841FTR-110-03-G-D-LC-10 Datasheet

Current PartRFQ

FTR-110-03-G-D-LC-06

Samtec Inc.In Stock: 2341FTR-110-03-G-D-LC-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The FTR-110-03-G-D-LC-10 has one identified substitute part: FTR-110-03-G-D-LC-06. Substitution eligibility is determined by strict equivalence across the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (20)
• Number of rows (2)
• Pitch spacing (0.050" / 1.27mm)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Surface Mount)
• Termination method (Solder)
• Contact material (Phosphor Bronze)
• Contact finish (Gold)
• Insulation material (Liquid Crystal Polymer)
• Operating temperature range (-55°C ~ 125°C)
• Current rating (3.1A per Contact)
• RoHS compliance (ROHS3 Compliant)

Both parts belong to the FTR series and share identical electrical and mechanical characteristics. The difference in part number suffix reflects packaging or inventory designation only and does not affect functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both FTR-110-03-G-D-LC-10 and FTR-110-03-G-D-LC-06 are active products manufactured by Samtec Inc. and maintain full ROHS3 compliance. Selection between these parts should be based on inventory availability and procurement lead times, as they are functionally and mechanically equivalent. The FTR-110-03-G-D-LC-06 variant currently maintains higher inventory levels (2304 pcs) compared to FTR-110-03-G-D-LC-10 (829 pcs), which may influence supply chain decisions. Both parts are suitable for applications requiring surface mount rectangular connectors with 20-position, 2-row configurations and 0.050" pitch spacing in operating environments ranging from -55°C to 125°C.

Frequently Asked Questions (FAQ)

Q: Can FTR-110-03-G-D-LC-06 be used as a direct replacement for FTR-110-03-G-D-LC-10?

A: Yes. Both parts share identical electrical and mechanical specifications across all critical parameters including connector type, position count, pitch spacing, contact material, and operating temperature range. They are functionally interchangeable.

Q: What determines substitution eligibility for FTR series connectors?

A: Substitution is valid when parts maintain identical specifications for connector type, contact type, number of positions, row configuration, pitch spacing, mounting method, termination type, contact material, contact finish, insulation material, operating temperature range, and current rating.

Q: Are there packaging differences between FTR-110-03-G-D-LC-10 and FTR-110-03-G-D-LC-06?

A: Both parts are supplied in tube packaging. The part number suffix variation does not reflect functional or mechanical differences.

Q: Do both parts meet the same compliance standards?

A: Yes. Both FTR-110-03-G-D-LC-10 and FTR-110-03-G-D-LC-06 are ROHS3 compliant and maintain UL94 V-0 material flammability ratings.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have a Moisture Sensitivity Level (MSL) of 1, indicating unlimited shelf life without special storage requirements.