FTMH-107-02-L-DV Equivalent & Substitute Parts

Part Overview

The FTMH-107-02-L-DV is a rectangular connector header manufactured by Samtec Inc., designed for surface mount board-to-board applications. This 14-position connector operates at 1.00mm pitch and is actively produced. Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and sourcing options while maintaining functional compatibility within specified electrical and mechanical parameters.

Substiute Parts

FTMH-107-02-L-DV

Samtec Inc.In Stock: 956FTMH-107-02-L-DV Datasheet

Current PartRFQ

BC050-14A-K0-0200-0160-0480-LB

GCTIn Stock: 3803BC050-14A-K0-0200-0160-0480-LB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FTMH-107-02-L-DV is determined by the following critical parameters:

• Connector configuration: 14-position, 2-row header with 1.00mm pitch
• Mounting and termination: Surface mount with solder termination
• Contact type and material: Male pin contacts with square shape
• Insulation material: Liquid Crystal Polymer (LCP)
• Compliance standards: UL94 V-0 flammability rating and ROHS3 compliance
• Moisture sensitivity: MSL 1 rating

The substitute part BC050-14A-K0-0200-0160-0480-LB from GCT meets these core configuration requirements, enabling functional equivalence within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

Both the FTMH-107-02-L-DV and BC050-14A-K0-0200-0160-0480-LB are active products with ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts is based on availability, packaging format, and application-specific electrical requirements.

The FTMH-107-02-L-DV is supplied in tube packaging, while the BC050-14A-K0-0200-0160-0480-LB is supplied in tape and reel format. Both connectors support the same pitch, row configuration, and board-to-board mounting topology. Electrical parameter differences exist in current rating and operating temperature range; these must be evaluated against specific circuit requirements.

Frequently Asked Questions (FAQ)

Q: Can BC050-14A-K0-0200-0160-0480-LB replace FTMH-107-02-L-DV in all applications?

A: Both parts share identical pitch (1.00mm), position count (14), row configuration (2), mounting type (surface mount), and contact geometry (square male pins). Substitution is valid when the application tolerates the electrical parameter differences listed in the comparison table.

Q: What are the key differences between these connectors?

A: The primary differences are manufacturer (Samtec vs. GCT), packaging format (tube vs. tape and reel), current rating per contact (2.8A vs. 1A), operating temperature range (-55°C to 125°C vs. -40°C to 105°C), and contact finish thickness specification (10.0µin vs. flash).

Q: Are both parts RoHS compliant?

A: Yes, both FTMH-107-02-L-DV and BC050-14A-K0-0200-0160-0480-LB are ROHS3 compliant with UL94 V-0 flammability rating and MSL 1 moisture sensitivity level.

Q: What packaging formats are available?

A: FTMH-107-02-L-DV is supplied in tube packaging. BC050-14A-K0-0200-0160-0480-LB is supplied in tape and reel format, suitable for automated assembly processes.

Q: Do these connectors have different mating contact lengths?

A: Yes, FTMH-107-02-L-DV has a contact length of 0.075" (1.90mm), while BC050-14A-K0-0200-0160-0480-LB has a contact length of 0.079" (2.00mm). This difference may affect mating depth and should be verified for specific board stackup configurations.