FTMH-105-02-F-DV Equivalent & Substitute Parts

Part Overview

The FTMH-105-02-F-DV is a rectangular connector header manufactured by Samtec Inc., designed for surface mount board-to-board applications. This 10-position connector operates at 1.00mm pitch and is classified as an active product with full inventory availability. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility is required within specified electrical and mechanical parameters.

Substiute Parts

FTMH-105-02-F-DV

Samtec Inc.In Stock: 898FTMH-105-02-F-DV Datasheet

Current PartRFQ

BC050-10A-K0-0200-0160-0480-LB

GCTIn Stock: 5184BC050-10A-K0-0200-0160-0480-LB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FTMH-105-02-F-DV are identified based on strict equivalence of the following critical parameters:

• Connector type: Header
• Contact type: Male Pin
• Number of positions: 10
• Number of rows: 2
• Pitch - mating: 0.039" (1.00mm)
• Row spacing - mating: 0.039" (1.00mm)
• Mounting type: Surface Mount
• Style: Board to Board
• Termination: Solder
• Fastening type: Push-Pull
• Insulation material: Liquid Crystal Polymer (LCP)
• Shrouding: Unshrouded
• Material flammability rating: UL94 V-0
• RoHS status: ROHS3 Compliant

The BC050-10A-K0-0200-0160-0480-LB from GCT meets these core substitution criteria and is classified as an equivalent part for the FTMH-105-02-F-DV.

Parameter Comparison

Engineering Selection Recommendations

Both the FTMH-105-02-F-DV and BC050-10A-K0-0200-0160-0480-LB are active products with ROHS3 compliance and UL94 V-0 flammability ratings. Selection between these parts should be based on the specific application requirements:

The FTMH-105-02-F-DV supports a higher current rating of 2.8A per contact and operates across a wider temperature range (-55°C to 125°C), making it suitable for applications requiring extended thermal performance and higher current capacity.

The BC050-10A-K0-0200-0160-0480-LB is rated for 1A per contact with a specified voltage rating of 250VAC/DC and operates within -40°C to 105°C. This part is appropriate for applications within these electrical and thermal specifications.

Both parts share identical pitch, row spacing, connector type, mounting method, and insulation material, ensuring mechanical and electrical compatibility at the board interface level.

Frequently Asked Questions (FAQ)

Q: Can BC050-10A-K0-0200-0160-0480-LB be used as a direct replacement for FTMH-105-02-F-DV?

A: Both parts meet the core substitution criteria of 10-position, 1.00mm pitch, surface mount, board-to-board headers with identical row spacing and push-pull fastening. However, application-specific requirements must be evaluated. The FTMH-105-02-F-DV supports higher current (2.8A vs. 1A per contact) and wider operating temperature range (-55°C to 125°C vs. -40°C to 105°C). Selection depends on whether the application requires these higher specifications.

Q: What are the key mechanical differences between these parts?

A: Contact length at mating differs: FTMH-105-02-F-DV is 0.075" (1.90mm) while BC050-10A-K0-0200-0160-0480-LB is 0.079" (2.00mm). Insulation height also differs: FTMH-105-02-F-DV is 0.059" (1.50mm) versus BC050-10A-K0-0200-0160-0480-LB at 0.039" (1.00mm). These dimensional variations may affect board layout and mating connector selection.

Q: Are both parts RoHS compliant?

A: Yes, both FTMH-105-02-F-DV and BC050-10A-K0-0200-0160-0480-LB are ROHS3 compliant with MSL rating of 1 (Unlimited).

Q: What is the difference in packaging between these parts?

A: FTMH-105-02-F-DV is supplied in Tube packaging, while BC050-10A-K0-0200-0160-0480-LB is supplied in Tape & Reel (TR) format. Packaging selection may impact procurement, handling, and assembly processes.

Q: Do both parts have the same contact material?

A: No. FTMH-105-02-F-DV uses Phosphor Bronze contacts, while BC050-10A-K0-0200-0160-0480-LB uses Copper Alloy contacts. Both feature gold plating on mating surfaces.