FT906L-T Equivalent & Substitute Parts

Part Overview

The FT906L-T is a 32-bit single-core microcontroller from Bridgetek's FT90x series, featuring 256KB FLASH memory, 320KB RAM, and integrated connectivity interfaces including Ethernet, I2C, SPI, UART/USART, and USB. The device operates at 100MHz with 42 I/O pins in an 80-LQFP package. The FT906L-T is classified as obsolete, making identification of compatible substitute parts essential for ongoing system support and new design implementations.

Substiute Parts

FT906L-T

Bridgetek Pte Ltd.In Stock: 777FT906L-T Datasheet

Current PartRFQ

FT906L-C-T

Bridgetek Pte Ltd.In Stock: 1016FT906L-C-T Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FT906L-T is determined by strict equivalence across the following critical parameters:

• Core Architecture: FT32 32-bit single-core processor
• Clock Speed: 100MHz operation
• Memory Configuration: 256KB FLASH program memory and 320KB RAM
• I/O Count: 42 I/O pins
• Connectivity Interfaces: Ethernet, I2C, SPI, UART/USART, USB
• Integrated Peripherals: POR, PWM, WDT
• Data Conversion: A/D 4x10-bit and D/A 2x10-bit
• Supply Voltage: 2.97V ~ 3.63V
• Operating Temperature Range: -40°C ~ 85°C
• Package Format: 80-LQFP (12x12)
• Mounting Technology: Surface Mount

The FT906L-C-T qualifies as a direct substitute based on identical electrical specifications and mechanical compatibility. The primary distinction is product status and packaging format.

Parameter Comparison

Engineering Selection Recommendations

The FT906L-C-T is the qualified substitute for the FT906L-T. Both devices are manufactured by Bridgetek Pte Ltd. and share identical electrical and mechanical specifications across all functional parameters. The FT906L-C-T maintains active product status, ensuring continued availability and support compared to the obsolete FT906L-T. Both parts comply with REACH regulations and carry identical ECCN and HTSUS classifications. The packaging format differs (Tube for FT906L-T versus Tray for FT906L-C-T), which may affect procurement and handling procedures but does not impact electrical or functional compatibility. Selection between these parts should be based on current availability, supply chain requirements, and packaging format compatibility with assembly processes.

Frequently Asked Questions (FAQ)

Q: Are FT906L-T and FT906L-C-T electrically identical?

A: Yes. Both devices feature identical core architecture (FT32 32-bit single-core), clock speed (100MHz), memory configuration (256KB FLASH, 320KB RAM), I/O count (42 pins), connectivity interfaces (Ethernet, I2C, SPI, UART/USART, USB), and operating parameters (2.97V ~ 3.63V supply, -40°C ~ 85°C operating range).

Q: What is the primary difference between these parts?

A: The FT906L-T is classified as obsolete, while the FT906L-C-T maintains active product status. Additionally, packaging format differs: FT906L-T is supplied in Tube format, while FT906L-C-T is supplied in Tray format.

Q: Can FT906L-C-T be used as a direct replacement in existing designs?

A: Yes. The FT906L-C-T is a direct substitute. The 80-LQFP (12x12) package format, pin configuration, and electrical specifications are identical, ensuring PCB-level compatibility without design modifications.

Q: Does packaging format affect functional performance?

A: No. Packaging format (Tube versus Tray) affects only procurement, storage, and handling procedures. Electrical performance and functional characteristics remain identical.

Q: Are there compliance or certification differences?

A: No. Both parts carry identical REACH status (REACH Unaffected), ECCN (3A991A2), HTSUS (8542.31.0001), and Moisture Sensitivity Level (MSL 3, 168 Hours).

Q: Which part should be selected for new designs?

A: The FT906L-C-T is recommended for new designs due to active product status, ensuring long-term availability and manufacturer support.